Internal: 300w x 150d x 65h mm
Water level: Minimum 10mm and Maximum 30mm above shelf.
Packed size: 36 x 25 x 66 cm
Typically suitable for classroom use performing PCR routines in shallow temperature controlled water, each tank can be set to a different temperature for denaturing, annealing and elongation - reducing solvent and consumables.
Featuring three 2 litre stainless steel tanks with individual thermostatic controls, allowing each chamber to have a different temperature and shallow water levels.
Each chamber comes complete with a removable Clifton "low" height stainless steel perforated shelf.
Heaters and temperature sensor concealed under the tank providing a clutter free working area easy to wipe clean. The heating footprint covers the underside base of the tank, providing rapid energy transfer, quicker heat up times and a reduction in energy consumption with improved temperature uniformity.
Comprising of a high quality corrosion resistant stainless steel tank, with a bright clean finish housed in a durable paint finished outer case. Painted surfaces feature anti-bacterial finish with good chemical resistance.
Illuminated on/off switch and heater indication lamp for each tank.
We verify the performance of every bath calibrating its controls and water temperature at 45°C for consistent temperature control in use.
- 15 mins
- 35 mins
- 85 mins
The rapid heat up times are based on minimum water level 10mm above shelf/platform.
It allows very small samples of DNA to be analysed and then making billions of copies. PCR is routinely used in forensic investigations, infectious disease testing and screening for genetic disease.
PCR is a system of copying/amplifying a sequence of DNA using DNA polymerase from heat stable bacteria. The target sequence is located in the genome using primers.
These primers are short pieces of DNA that are complementary to the ends of the target sequence. The DNA, primers and bacterial DNA polymerase are mixed, cycled through three temperatures which causes the DNA to be amplified.
2. Small samples easily seen and not obscured by conventional high sided water baths.
3. Low profile design allows easier access to samples in bath.
4. Full use can be made of the bath to provide maximum working area.
5. Three-year warranty and comprehensive customer support.
6. Before leaving our factory every water bath is identified with a unique serial number and undergoes a factory calibration adjusting control to known traceable value, electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.
7. Painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfections. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the paint finish.
Lift Off Gable Lid to suit 2 and 4 litre Unstirred Baths
Clifton® clear polycarbonate Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These clear plastic gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use
Stainless Steel Gable Lid to fit 2 and 4 Litre Unstirred Baths
Clifton® Stainless steel Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use
Flat One Piece Stainless Steel Lid for 2 and 4 Litre Baths
Stainless steel flat lid minimizing heat loss, saving energy, and assisting to maintain bath temperature. Also when a Clifton water bath is 'not in use', with this lid fitted it prevents contamination of liquid from airbourne particles acts as a dust cover. The lid is fitted with an insulated handle.
Polypropylene Spheres
This blanket of hollow spheres is ideal for open tanks of water. Reduces thermal losses - Savings of up to 75% can be achieved with a single layer - Increase energy saving & reducing costs. A single layer of spheres covers 91% of the liquid surface trapping air in the gaps which adds to the thermal insulation properties. Reduces steaming - vapour losses reduced by 90%. Reduce vapours & splashing. No impedance to workload.
Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Bath Armor™ replacement for water in water baths: Pack Size: 4 Litres
The unique properties of the dry media support the samples without blocks, racks, floats or weights.
The cumbersome task and frequency of emptying, cleaning and refilling is simplified and dramatically reduced, resulting in a more productive lab, more successful experiments and less lab downtime.
There is no steam or condensation which may be a nuisance in some labs.
Draining Syphon
Allows the easy and quick emptying of water baths, immerse into water bath, squeeze the bellow and point the outlet to a bucket or sink.
Calibration Record
Factory Calibration record must be ordered with equipment.
Internal: 300w x 150d x 150h mm
Water level maximum: 130mm shelf fitted working depth 115mm
Water level minimum: 55mm shelf fitted working depth 40mm
Packed: 40 x 43 x 63cm
Featuring three 4 litre stainless steel tanks with individual thermostatic controls, allowing each chamber to have a different temperature and water levels.
Each chamber comes complete with a removable Clifton "low" height stainless steel perforated shelf.
Heaters and temperature sensor concealed under the tank providing a clutter free working area easy to wipe clean. The heating footprint covers the underside base of the tank, providing rapid energy transfer, quicker heat up times and a reduction in energy consumption with improved temperature uniformity.
Comprising of a high quality corrosion resistant stainless steel tank, with a bright clean finish housed in a durable paint finished outer case. Painted surfaces feature anti-bacterial finish with good chemical resistance.
Illuminated on/off switch and heater indication lamp for each tank.
We verify the performance of every bath calibrating its controls and water temperature at 45°C for consistent temperature control in use.
- 13 mins
- 37 mins
- 60 mins
2. Small samples easily seen and not obscured by conventional high sided water baths.
3. Low profile design allows easier access to samples in bath.
4. Full use can be made of the bath to provide maximum working area.
5. Three-year warranty and comprehensive customer support.
6. Before leaving our factory every water bath is identified with a unique serial number and undergoes a factory calibration adjusting control to known traceable value, electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.
7. Painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfections. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the paint finish.
Lift Off Gable Lid to suit 2 and 4 litre Unstirred Baths
Clifton® clear polycarbonate Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These clear plastic gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use
Stainless Steel Gable Lid to fit 2 and 4 Litre Unstirred Baths
Clifton® Stainless steel Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use
Flat One Piece Stainless Steel Lid for 2 and 4 Litre Baths
Stainless steel flat lid minimizing heat loss, saving energy, and assisting to maintain bath temperature. Also when a Clifton water bath is 'not in use', with this lid fitted it prevents contamination of liquid from airbourne particles acts as a dust cover. The lid is fitted with an insulated handle.
Polypropylene Spheres
This blanket of hollow spheres is ideal for open tanks of water. Reduces thermal losses - Savings of up to 75% can be achieved with a single layer - Increase energy saving & reducing costs. A single layer of spheres covers 91% of the liquid surface trapping air in the gaps which adds to the thermal insulation properties. Reduces steaming - vapour losses reduced by 90%. Reduce vapours & splashing. No impedance to workload.
Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Bath Armor™ replacement for water in water baths: Pack Size: 4 Litres
The unique properties of the dry media support the samples without blocks, racks, floats or weights.
The cumbersome task and frequency of emptying, cleaning and refilling is simplified and dramatically reduced, resulting in a more productive lab, more successful experiments and less lab downtime.
There is no steam or condensation which may be a nuisance in some labs.
Draining Syphon
Allows the easy and quick emptying of water baths, immerse into water bath, squeeze the bellow and point the outlet to a bucket or sink.
Calibration Record
Factory Calibration record must be ordered with equipment.
Internal: 300w x 150d x 65h mm
Water level: Minimum 10mm and Maximum 30mm above shelf.
Packed size: 36 x 25 x 66cm
Typically suitable for classroom use performing PCR routines in shallow temperature controlled water, each tank can be set to a different temperature for denaturing, annealing and elongation - reducing solvent and consumables.
Featuring three 2 litre stainless steel tanks with individual thermostatic digital controls, allowing each chamber to have a different temperature and shallow water levels.
Each chamber comes complete with a removable Clifton "low" height stainless steel perforated shelf.
Heaters and temperature sensor concealed under the tank providing a clutter free working area easy to wipe clean. The heating footprint covers the underside base of the tank, providing rapid energy transfer, quicker heat up times and a reduction in energy consumption with improved temperature uniformity.
Comprising of a high quality corrosion resistant stainless steel tank, with a bright clean finish housed in a durable paint finished outer case. Painted surfaces feature anti-bacterial finish with good chemical resistance.
Illuminated on/off switch and heater indication lamp for each tank.
We verify the performance of every bath calibrating its controls and water temperature at 45°C for consistent temperature control in use.
- 15 mins mins
- 35 mins mins
- 85 mins mins
The rapid heat up times are based on minimum water level 10mm above shelf/platform.
It allows very small samples of DNA to be analysed and then making billions of copies. PCR is routinely used in forensic investigations, infectious disease testing and screening for genetic disease.
PCR is a system of copying/amplifying a sequence of DNA using DNA polymerase from heat stable bacteria. The target sequence is located in the genome using primers.
These primers are short pieces of DNA that are complementary to the ends of the target sequence. The DNA, primers and bacterial DNA polymerase are mixed, cycled through three temperatures which causes the DNA to be amplified.
2. Small samples easily seen and not obscured by conventional high sided water baths.
3. Low profile design allows easier access to samples in bath.
4. Full use can be made of the bath to provide maximum working area.
5. Three-year warranty and comprehensive customer support.
6. Before leaving our factory every water bath is identified with a unique serial number and undergoes a factory calibration adjusting control to known traceable value, electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.
7. Painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfections. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the paint finish.
Lift Off Gable Lid to suit 2 and 4 litre Unstirred Baths
Clifton® clear polycarbonate Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These clear plastic gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use
Stainless Steel Gable Lid to fit 2 and 4 Litre Unstirred Baths
Clifton® Stainless steel Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use
Flat One Piece Stainless Steel Lid for 2 and 4 Litre Baths
Stainless steel flat lid minimizing heat loss, saving energy, and assisting to maintain bath temperature. Also when a Clifton water bath is 'not in use', with this lid fitted it prevents contamination of liquid from airbourne particles acts as a dust cover. The lid is fitted with an insulated handle.
Polypropylene Spheres
This blanket of hollow spheres is ideal for open tanks of water. Reduces thermal losses - Savings of up to 75% can be achieved with a single layer - Increase energy saving & reducing costs. A single layer of spheres covers 91% of the liquid surface trapping air in the gaps which adds to the thermal insulation properties. Reduces steaming - vapour losses reduced by 90%. Reduce vapours & splashing. No impedance to workload.
Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Draining Syphon
Allows the easy and quick emptying of water baths, immerse into water bath, squeeze the bellow and point the outlet to a bucket or sink.
Calibration Record
Factory Calibration record must be ordered with equipment.
Internal: 300w x 150d x 150h mm
Water level maximum: 130mm shelf fitted working depth 115mm
Water level minimum: 55mm shelf fitted working depth 40mm
Packed: 40 x 43 x 63cm
Featuring three 4 litre stainless steel tanks with individual thermostatic digital controls, allowing each chamber to have a different temperature and shallow water levels.
Each chamber comes complete with a removable Clifton "low" height stainless steel perforated shelf.
Heaters and temperature sensor concealed under the tank providing a clutter free working area easy to wipe clean. The heating footprint covers the underside base of the tank, providing rapid energy transfer, quicker heat up times and a reduction in energy consumption with improved temperature uniformity.
Comprising of a high quality corrosion resistant stainless steel tank, with a bright clean finish housed in a durable paint finished outer case. Painted surfaces feature anti-bacterial finish with good chemical resistance.
Illuminated on/off switch and heater indication lamp for each tank.
We verify the performance of every bath calibrating its controls and water temperature at 45°C for consistent temperature control in use.
- 13 mins mins
- 37 mins mins
- 60 mins mins
2. Small samples easily seen and not obscured by conventional high sided water baths.
3. Low profile design allows easier access to samples in bath.
4. Full use can be made of the bath to provide maximum working area.
5. Three-year warranty and comprehensive customer support.
6. Before leaving our factory every water bath is identified with a unique serial number and undergoes a factory calibration adjusting control to known traceable value, electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.
7. Painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfections. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the paint finish.
Lift Off Gable Lid to suit 2 and 4 litre Unstirred Baths
Clifton® clear polycarbonate Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These clear plastic gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use
Stainless Steel Gable Lid to fit 2 and 4 Litre Unstirred Baths
Clifton® Stainless steel Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use
Flat One Piece Stainless Steel Lid for 2 and 4 Litre Baths
Stainless steel flat lid minimizing heat loss, saving energy, and assisting to maintain bath temperature. Also when a Clifton water bath is 'not in use', with this lid fitted it prevents contamination of liquid from airbourne particles acts as a dust cover. The lid is fitted with an insulated handle.
Polypropylene Spheres
This blanket of hollow spheres is ideal for open tanks of water. Reduces thermal losses - Savings of up to 75% can be achieved with a single layer - Increase energy saving & reducing costs. A single layer of spheres covers 91% of the liquid surface trapping air in the gaps which adds to the thermal insulation properties. Reduces steaming - vapour losses reduced by 90%. Reduce vapours & splashing. No impedance to workload.
Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Draining Syphon
Allows the easy and quick emptying of water baths, immerse into water bath, squeeze the bellow and point the outlet to a bucket or sink.
Calibration Record
Factory Calibration record must be ordered with equipment.