Internal (mm): 325w x 300d x 150h mm
Water level: Minimum and maximum water level are governed by the constant level which maintains water level during boiling. Using standard laboratory tubing, connect the bottom outlet of the constant level to a regulated water supply/tap and adjust to supply a slow feed of water while maintaining boiling and this will automatically maintain a safe water level. The side outlet acts as an overflow to a sink or drain. Shelf fitted working depth - 80 mm.
Packed: 45 x 41 x 32 cm
Fitted with a sheathed immersion element with low liquid float device. With the heater directly immersed in water it provides rapid boiling. A standard feature is a constant level device, which maintains a fixed level of water thereby eliminating the need to regularly top up the bath. Complete with lid.
Comprising of a high quality corrosion resistant stainless steel tank with bright clean finish housed in a durable painted outer case. Painted surfaces feature anti-bacterial finish with good
chemical resistance.
2. The shelf in the stainless steel tank provides a stable support for vessels and can be removed for cleaning. The shelf is a low height design maximizing the working height in the bath, either needing less water when compared with traditional water baths or allowing tall containers or vessels to be immersed to a greater working depth. With lower water levels comes the benefit reduced heat up times and energy saving.
3. Two year warranty and comprehensive customer support.
4. Broad range of accessories available to suit wide range of applications.
5. Before leaving our factory every water bath is identified with a unique serial number and is electrically tested for safety at final inspection. A test certificate enclosed in rear of the instruction book.
6. Painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfections. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the paint finish.
Hinged Gable Lid to suit 14 Litre Unstirred Baths
Using conventional lift off lids when removed from a water bath, condensation runs all over your bench top, a mess to clean up. Where do you put the lid once removed?
Hinged lids have a number of benefits in use over lift off lids. They simply hinge open 90° and stay open and any condensation collects in the lid, samples/work can be easily removed or placed in water bath. Close the lid and all the collected condensation runs into rear of the water bath. No mess. The hinge lid can be removed easily and quickly for cleaning or access.
Lift Off Gable Lid to suit 5, 14 and 18 Litre Unstirred Baths
Clifton Range® Clear Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These lids with a high profile gable allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use
Stainless Steel Hinged Gable Lid to suit 14 and 18 Litre Boiling Baths
Clifton® Stainless steel hinged Gable Lids reduces evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile design allows extended use of the bath, right into the edges of the tank. No drip points and condensate returns back into the bath.
Hinged lids have a number of benefits in use over lift off lids, these simply hinge open, any condensation collects in the lid, samples can be easily removed or placed in water bath. Close the lid and all the collected condensation runs into rear of the water bath. No mess.
Flat One Piece Stainless Steel Lid for 14 Litre Baths
Stainless steel flat lid minimizing heat loss, saving energy, and assisting to maintain bath temperature. Also when a Clifton water bath is 'not in use', with this lid fitted it prevents contamination of liquid from airbourne particles acts as a dust cover. The lid is fitted with an insulated handle.
4 x 114mm Stainless Steel Concentric Ringed Lid to suit 14 Litre Unstirred Baths
The lid and rings are manufactured from stainless steel. The concentric rings provide varying hole diameters in the lid. In use the lid minimises evaporation and maintains temperature stability of the water bath when tall vessels are being heated at elevated temperatures.
6 x 83mm Stainless Steel Concentric Ringed Lid to suit 14 Litre Unstirred Baths
The lid and rings are manufactured from stainless steel. The concentric rings provide varying hole diameters in the lid. In use the lid minimises evaporation and maintains temperature stability of the water bath when tall vessels are being heated at elevated temperatures.
Polypropylene Spheres
This blanket of hollow spheres is ideal for open tanks of water. Reduces thermal losses - Savings of up to 75% can be achieved with a single layer - Increase energy saving & reducing costs. A single layer of spheres covers 91% of the liquid surface trapping air in the gaps which adds to the thermal insulation properties. Reduces steaming - vapour losses reduced by 90%. Reduce vapours & splashing. No impedance to workload.
Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Draining Syphon
Allows the easy and quick emptying of water baths, immerse into water bath, squeeze the bellow and point the outlet to a bucket or sink.
PDF File Instruction Books
Internal: 325w x 300d x 200h mm
Water level: Minimum and maximum water level are governed by the constant level which maintains water level during boiling. Using standard laboratory tubing, connect the bottom outlet of the constant level to a regulated water supply/tap and adjust to supply a slow feed of water while maintaining boiling and this will automatically maintain a safe water level. The side outlet acts as an overflow to a sink or drain. Shelf fitted working depth - 125 mm.
Packed: 45 x 41 x 32 cm
Fitted with a sheathed immersion element with low liquid float device. With the heater directly immersed in water it provides rapid boiling. A standard feature is a constant level device, which maintains a fixed level of water thereby eliminating the need to regularly top up the bath. Complete with lid and sterilising tray.
Comprising of a high quality corrosion resistant stainless steel tank with bright clean finish housed in a durable painted outer case. Painted surfaces feature anti-bacterial finish with good
chemical resistance.
2. The shelf in the stainless steel tank provides a stable support for vessels and can be removed for cleaning. The shelf is a low height design maximizing the working height in the bath, either needing less water when compared with traditional water baths or allowing tall containers or vessels to be immersed to a greater working depth. With lower water levels comes the benefit reduced heat up times and energy saving.
3. Two year warranty and comprehensive customer support.
4. Broad range of accessories available to suit wide range of applications.
5. Before leaving our factory every water bath is identified with a unique serial number and is electrically tested for safety at final inspection. A test certificate enclosed in rear of the instruction book.
6. Painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfections. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the paint finish.
Hinged Gable Lid to suit 14 Litre Unstirred Baths
Using conventional lift off lids when removed from a water bath, condensation runs all over your bench top, a mess to clean up. Where do you put the lid once removed?
Hinged lids have a number of benefits in use over lift off lids. They simply hinge open 90° and stay open and any condensation collects in the lid, samples/work can be easily removed or placed in water bath. Close the lid and all the collected condensation runs into rear of the water bath. No mess. The hinge lid can be removed easily and quickly for cleaning or access.
Lift Off Gable Lid to suit 5, 14 and 18 Litre Unstirred Baths
Clifton Range® Clear Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These lids with a high profile gable allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use
Stainless Steel Hinged Gable Lid to suit 14 and 18 Litre Boiling Baths
Clifton® Stainless steel hinged Gable Lids reduces evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile design allows extended use of the bath, right into the edges of the tank. No drip points and condensate returns back into the bath.
Hinged lids have a number of benefits in use over lift off lids, these simply hinge open, any condensation collects in the lid, samples can be easily removed or placed in water bath. Close the lid and all the collected condensation runs into rear of the water bath. No mess.
Flat One Piece Stainless Steel Lid for 14 Litre Baths
Stainless steel flat lid minimizing heat loss, saving energy, and assisting to maintain bath temperature. Also when a Clifton water bath is 'not in use', with this lid fitted it prevents contamination of liquid from airbourne particles acts as a dust cover. The lid is fitted with an insulated handle.
4 x 114mm Stainless Steel Concentric Ringed Lid to suit 14 Litre Unstirred Baths
The lid and rings are manufactured from stainless steel. The concentric rings provide varying hole diameters in the lid. In use the lid minimises evaporation and maintains temperature stability of the water bath when tall vessels are being heated at elevated temperatures.
6 x 83mm Stainless Steel Concentric Ringed Lid to suit 14 Litre Unstirred Baths
The lid and rings are manufactured from stainless steel. The concentric rings provide varying hole diameters in the lid. In use the lid minimises evaporation and maintains temperature stability of the water bath when tall vessels are being heated at elevated temperatures.
Polypropylene Spheres
This blanket of hollow spheres is ideal for open tanks of water. Reduces thermal losses - Savings of up to 75% can be achieved with a single layer - Increase energy saving & reducing costs. A single layer of spheres covers 91% of the liquid surface trapping air in the gaps which adds to the thermal insulation properties. Reduces steaming - vapour losses reduced by 90%. Reduce vapours & splashing. No impedance to workload.
Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Draining Syphon
Allows the easy and quick emptying of water baths, immerse into water bath, squeeze the bellow and point the outlet to a bucket or sink.
PDF File Instruction Books
Internal: 500w x 300d x 200h mm
Water level: Minimum and maximum water level are governed by the constant level which maintains water level during boiling. Using standard laboratory tubing, connect the bottom outlet of the constant level to a regulated water supply/tap and adjust to supply a slow feed of water while maintaining boiling and this will automatically maintain a safe water level. The side outlet acts as an overflow to a sink or drain. Shelf fitted working depth - 125 mm.
Packed: 62 x 41 x 37cm
Fitted with a sheathed immersion element with low liquid float device. With the heater directly immersed in water it provides rapid boiling. A standard feature is a constant level device, which maintains a fixed level of water thereby eliminating the need to regularly top up the bath. Complete with lid.
Comprising of a high quality corrosion resistant stainless steel tank with bright clean finish housed in a durable painted outer case. Painted surfaces feature anti-bacterial finish with good
chemical resistance.
2. The shelf in the stainless steel tank provides a stable support for vessels and can be removed for cleaning. The shelf is a low height design maximizing the working height in the bath, either needing less water when compared with traditional water baths or allowing tall containers or vessels to be immersed to a greater working depth. With lower water levels comes the benefit reduced heat up times and energy saving.
3. Two year warranty and comprehensive customer support.
4. Broad range of accessories available to suit wide range of applications.
5. Before leaving our factory every water bath is identified with a unique serial number and is electrically tested for safety at final inspection. A test certificate enclosed in rear of the instruction book.
6. Painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfections. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the paint finish.
Hinged Gable Lid to suit 22 and 28 Litre Unstirred and Shaking Water Baths
Using conventional lift off lids when removed from a water bath, condensation runs all over your bench top, a mess to clean up. Where do you put the lid once removed?
Hinged lids have a number of benefits in use over lift off lids. They simply hinge open 90° and stay open and any condensation collects in the lid, samples/work can be easily removed or placed in water bath. Close the lid and all the collected condensation runs into rear of the water bath. No mess. The hinge lid can be removed easily and quickly for cleaning or access.
Lift Off Gable Lid to suit 9, 22 and 28 Litre Unstirred and Shaking Water Baths
Clifton® clear Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use
Stainless Steel Gable Lid to fit 22 and 28 Litre Boiling Baths
1. The Clifton Gable lid has been designed allowing full use of whole width of a Clifton water bath with the lowest height of the gable being 45mm above the bath. This unique feature means test tube racks or flasks can be placed across the whole width of the bath without fouling the lid maximising the bath working area.
2. Designed with customer in mind ensuring where condensation accumulates in use there are no drip points which could spoil work in open flasks in your Clifton water bath.
3. Water evaporation is reduced at elevated temperatures, maintaining water levels in the Clifton water bath.
4. Where an accessory TC-1 Thermometer is used the temperature can be read from the thermometer with the lid in place.
5. Lid fits into the tank ensuring all condensation runs back into the bath and not down the side onto your bench top.
6. Reduces energy consumption and running costs for your Clifton water bath.
7. Insulated handle.
Flat One Piece Stainless Steel Lid for 22 Litre Baths
Stainless steel flat lid minimizing heat loss, saving energy, and assisting to maintain bath temperature. Also when a Clifton water bath is 'not in use', with this lid fitted it prevents contamination of liquid from airbourne particles acts as a dust cover. The lid is fitted with an insulated handle.
Polypropylene Spheres
This blanket of hollow spheres is ideal for open tanks of water. Reduces thermal losses - Savings of up to 75% can be achieved with a single layer - Increase energy saving & reducing costs. A single layer of spheres covers 91% of the liquid surface trapping air in the gaps which adds to the thermal insulation properties. Reduces steaming - vapour losses reduced by 90%. Reduce vapours & splashing. No impedance to workload.
Stainless Steel Ringed Lid to fit 9, 22 & 28 Litre Unstirred Baths 6 x 114mm Holes
The lid and rings are manufactured from stainless steel. The concentric rings provide varying hole diameters in the lid. In use the lid minimises evaporation and maintains temperature stability of the water bath when tall vessels are being heated at elevated temperatures.
Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Draining Syphon
Allows the easy and quick emptying of water baths, immerse into water bath, squeeze the bellow and point the outlet to a bucket or sink.
PDF File Instruction Books