Nickel-Electro ltd.

1105ER

Rectangular, aluminium electrically heated, multi-place bath regulates from a gentle simmer to a vigorous boil, fitted with concentric ringed lid to vary the hole size.

The steam produced provides an effective source of heat for samples:

• 
  
• that may be otherwise thermally damaged by a naked flame
• 
  
• used for applications to distill/concentrate liquids, melt agar and other solids
• 
  
• metallurgical analysis, protein analysis and bacteriological examinations
• 
  

Features an integral constant level device to maintain constant water level during boiling and supplied with a set of rings to vary the diameter of aperture to accommodate different sizes of vessels e.g. evaporating dishes and glassware, including round-bottom flasks.

Features a built-in energy regulator, which controls the amount of boiling in a bath from a gentle simmer to a vigorous boil.

Fitted with a sheathed immersion element and a resettable thermal cut-out for safety with heater indicator.

The bath provides constant boiling water for gentle heating of samples in steam. Always site the boiling bath on a heat proof surface.

Always connect the constant level with laboratory tubing to a water supply, adjust the flow to gently top up the water level, whilst maintaining boiling.

The constant level device has a visible water spout to check that water in the boiling bath is maintaining working level. This prevents the chance of the water bath being boiled dry.

Manual reset cut out.

Always read the instruction book.

1000W

2 Years

By removing concentric rings, the hole sizes can be varied to accommodate different sizes of vessels simultaneously.

• 
  
• Number of holes in bath lid is 6. Each with a maximum hole diameter of 80mm.
• 
  
• In each aperture a 4 ring set is fitted.
• 
  
• Centre ring - removed, aperture 30mm diameter hole.
• 
  
• Ring 1 - removed, aperture 42mm diameter hole.
• 
  
• Ring 2 - removed, aperture 58mm diameter hole.
• 
  
• Ring 3 - removed, maximum diameter 80mm hole.

The constant level maintains liquid level during boiling. Use standard laboratory tubing and connect one outlet to a tap and adjust the water supply to maintain boiling water level. The other outlet acts as an overflow to a sink or drain.

1. All baths have an integral constant level device to regulate the level of water.

2. Supplied with concentric ringed lid to vary the diameter holes.

3. Smooth walled tank making it easy to clean and de-scale.

4. Features a built-in energy regulator, which controls the amount of boiling in a bath from a gentle simmer to a vigorous boil.

5. Each bath is uniquely identified with its own serial number recorded on our product database, which includes all of its manufacturing inspection data. Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.

1105E

Rectangular, aluminium electrically heated, multi-place bath with fixed temperature for boiling water, fitted with concentric ringed lids to vary the hole size.

The steam produced provides an effective source of heat for samples:

• 
  
• that may be otherwise thermally damaged by a naked flame
• 
  
• used for applications to distill/concentrate liquids, melt agar and other solids
• 
  
• metallurgical analysis, protein analysis and bacteriological examinations
• 
  

Features an integral constant level device to maintain constant water level during boiling and supplied with sets of rings to vary the diameter of each hole to accommodate different sizes of vessels e.g. evaporating dishes and glassware, including round-bottom flasks simultaneously.

Fitted with a sheathed immersion element and a resettable thermal cut-out for safety with heater indicator.

The bath provides constant boiling water for gentle heating of samples.

Accessory ER-1 Energy Regulator can be connected to the boiling bath, allowing control of the amount of boiling from a gentle simmer to a vigorous boil.

Always site the boiling bath on a heat proof surface.

The constant level device has a viable water spout to check that the water in the boiling bath is at boiling level. This prevents the chance of water being boiled dry.

The constant water level has a visible water spout for checking water is topping up the boiling bath in use and avoids the chances of boiling dry.

Manual reset cut out.

Always read the instruction book.

1000W

2 Years

By removing concentric rings, the hole sizes can be varied to accommodate different sizes of vessels simultaneously.

• 
  
• Number of holes in bath lid is 6. Each with a maximum hole diameter of 80mm.
• 
  
• In each aperture a 4 ring set is fitted.
• 
  
• Centre ring - removed, aperture 30mm diameter hole.
• 
  
• Ring 1 - removed, aperture 42mm diameter hole.
• 
  
• Ring 2 - removed, aperture 58mm diameter hole.
• 
  
• Ring 3 - removed, maximum diameter 80mm hole.

The constant level maintains liquid level during boiling. Use standard laboratory tubing and connect one outlet to a tap and adjust the water supply to maintain boiling water level. The other outlet acts as an overflow to a sink or drain. The constant level features a spout allowing quick visible checks that the water supply is being maintained in use.

1. All baths have an integral constant level device to regulate the level of the water.

2. Supplied with concentric ringed lids to vary the diameter holes.

3. Accessory energy regulator, ER-1, can be used for control between vigorous boil and gentle simmer.

4. Smooth walled tank making it easy to clean and de-scale.

5. Each bath is uniquely identified with its own serial number recorded on our product database, which includes all of its manufacturing inspection data. Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.

1101ER

Rectangular, stainless steel electrically heated, multi-place bath regulates from a gentle simmer to a vigorous boil, fitted with concentric ringed lid to vary the hole size.

The steam produced provides an effective source of heat for samples:

• 
  
• that may be otherwise thermally damaged by a naked flame
• 
  
• used for applications to distill/concentrate liquids, melt agar and other solids
• 
  
• metallurgical analysis, protein analysis and bacteriological examinations
• 
  

Features an integral constant level device to maintain constant water level during boiling and supplied with a set of rings to vary the diameter of aperture to accommodate different sizes of vessels e.g. evaporating dishes and glassware, including round-bottom flasks.

Features a built-in energy regulator, which controls the amount of boiling in a bath from a gentle simmer to a vigorous boil.

Fitted with a sheathed immersion element and a resettable thermal cut-out for safety with heater indicator.

The bath provides constant boiling water for gentle heating of samples in steam. Always site the boiling bath on a heat proof surface.

Always connect the constant level with laboratory tubing to a water supply, adjust the flow to gently top up the water level, whilst maintaining boiling.

The constant level device has a visible water spout to check that water in the boiling bath is maintaining working level. This prevents the chance of the water bath being boiled dry.

Manual reset cut out.

Always read the instruction book.

1000W

2 Years

By removing concentric rings, the hole sizes can be varied to accommodate different sizes of vessel simultaneously.

• 
  
• Number of holes in bath lid 6. Each with a maximum hole diameter 80mm.
• 
  
• In each aperture a 4 ring set is fitted.
• 
  
• Centre ring - removed, aperture 30mm diameter hole.
• 
  
• Ring 1 - removed, aperture 42mm diameter hole.
• 
  
• Ring 2 - removed, aperture 58mm diameter hole.
• 
  
• Ring 3 - removed, maximum diameter 80mm hole.

The constant level maintains liquid level during boiling. Use standard laboratory tubing and connect one outlet to a tap and adjust the water supply to maintain boiling water level. The other outlet acts as an overflow to a sink or drain.

1. All baths have an integral constant level device to regulate the level of water.

2. Supplied with concentric ringed lid to vary the diameter holes.

3. Smooth walled tank making it easy to clean and de-scale.

4. Each bath is uniquely identified with its own serial number recorded on our product database, which includes all of its manufacturing inspection data. Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.

1101E

Rectangular, stainless steel electrically heated, multi-place bath with fixed temperature for boiling water, fitted with concentric ringed lid to vary the hole size.

The steam produced provides an effective source of heat for samples:

• 
  
• that may be otherwise thermally damaged by a naked flame
• 
  
• used for applications to distil/concentrate liquids, melt agar and other solids
• 
  
• metallurgical analysis, protein analysis and bacteriological examinations
• 
  

Features an integral constant level device to maintain constant water level during boiling and supplied with a set of rings to vary the diameter of aperture to accommodate different sizes of vessels e.g. evaporating dishes and glassware, including round-bottom flasks.

Fitted with a sheathed immersion element and a resettable thermal cut-out for safety with heater indicator.

The bath provides constant boiling water for gentle heating of samples.

Accessory ER-1 Energy Regulator can be connected to boiling bath allowing control of the amount of boiling from a gentle simmer to a vigorous boil.

Always site the boiling bath on a heat proof surface.

Always connect the constant level with laboratory tubing to a water supply, adjust the flow to gently top up the water level, whilst maintaining boiling.

The constant level device has a visible water spout to check that water in the boiling bath is maintaining working level. This prevents the chance of the water bath being boiled dry.

Manual reset cut out.

Always read the instruction book.

1000W

2 Years

By removing concentric rings, the hole sizes can be varied to accommodate different sizes of vessel simultaneously.

• 
  
• Number of holes in bath lid is 6. Each with a maximum hole diameter of 80mm.
• 
  
• In each aperture a 4 ring set is fitted.
• 
  
• Centre ring - removed, aperture 30mm diameter hole.
• 
  
• Ring 1 - removed, aperture 42mm diameter hole.
• 
  
• Ring 2 - removed, aperture 58mm diameter hole.
• 
  
• Ring 3 - removed, maximum diameter 80mm hole.

The constant level maintains liquid level during boiling. Use standard laboratory tubing and connect one outlet to a tap and adjust the water supply to maintain boiling water level. The other outlet acts as an overflow to a sink or drain.

1. All baths have an integral constant level device to regulate the level of water.

2. Supplied with concentric ringed lid to vary the diameter holes.

3. Accessory Energy Regulator ER-1 can be used for control between vigorous boil and gentle simmer.

4. Smooth walled tank making it easy to clean and de-scale.

5. Each bath is uniquely identified with its own serial number recorded on our product database, which includes all of its manufacturing inspection data. Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.

1104ER

Rectangular, stainless steel electrically heated, multi-place bath regulates from a gentle simmer to a vigorous boil, fitted with concentric ringed lid to vary the hole size.

The steam produced provides an effective source of heat for samples:

• 
  
• that may be otherwise thermally damaged by a naked flame
• 
  
• used for applications to distill/concentrate liquids, melt agar and other solids
• 
  
• metallurgical analysis, protein analysis and bacteriological examinations
• 
  

Features an integral constant level device to maintain constant water level during boiling and supplied with a set of rings to vary the diameter of aperture to accommodate different sizes of vessels e.g. evaporating dishes and glassware, including round-bottom flasks.

Features a built-in energy regulator, which controls the amount of boiling in a bath from a gentle simmer to a vigorous boil.

Fitted with a sheathed immersion element and a resettable thermal cut-out for safety with heater indicator.

The bath provides constant boiling water for gentle heating of samples in steam. Always site the boiling bath on a heat proof surface.

Always connect the constant level with laboratory tubing to a water supply, adjust the flow to gently top up the water level, whilst maintaining boiling.

The constant level device has a visible water spout to check that water in the boiling bath is maintaining working level. This prevents the chance of the water bath being boiled dry.

Manual reset cut out.

Always read the instruction book.

1000W

2 Years

By removing concentric rings, the hole sizes can be varied to accommodate different sizes of vessel simultaneously.

• 
  
• Number of holes in bath lid is 12. Each with a maximum hole diameter of 80mm.
• 
  
• In each aperture a 4 ring set is fitted.
• 
  
• Centre ring - removed, aperture 30mm diameter hole.
• 
  
• Ring 1 - removed, aperture 42mm diameter hole.
• 
  
• Ring 2 - removed, aperture 58mm diameter hole.
• 
  
• Ring 3 - removed, maximum diameter 80mm hole.

The constant level maintains liquid level during boiling. Use standard laboratory tubing and connect one outlet to a tap and adjust the water supply to maintain boiling water level. The other outlet acts as an overflow to a sink or drain.

1. All baths have an integral constant level device to regulate the level of water.

2. Supplied with concentric ringed lid to vary the diameter holes.

3. Smooth walled tank making it easy to clean and de-scale.

4. Each bath is uniquely identified with its own serial number recorded on our product database, which includes all of its manufacturing inspection data. Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.

1104E

Rectangular, stainless steel electrically heated, multi-place bath with fixed temperature for boiling water, fitted with concentric ringed lid to vary the hole size.

The steam produced provides an effective source of heat for samples:

• 
  
• that may be otherwise thermally damaged by a naked flame
• 
  
• used for applications to distil/concentrate liquids, melt agar and other solids
• 
  
• metallurgical analysis, protein analysis and bacteriological examinations
• 
  

Features an integral constant level device to maintain constant water level during boiling and supplied with sets of rings to vary the diameter of each hole to accommodate different sizes of vessels e.g. evaporating dishes and glassware, including round-bottom flasks simultaneously.
Fitted with a sheathed immersion element and a resettable thermal cut-out for safety with heater indicator

The bath provides constant boiling water for gentle heating of samples.

Accessory ER-1 Energy Regulator can be connected to boiling bath allowing control of the amount of boiling from a gentle simmer to a vigorous boil.

Always site the boiling bath on a heat proof surface.

The constant level device has a viable water spout to check that the water in the boiling bath is at boiling level. This prevents the chance of water being boiled dry.

The constant water level has a visible water spout for checking water is topping up the boiling bath in use and avoids the chances of boiling dry.

Manual reset cut out.

Always read the instruction book.

1000W

2 Years

By removing concentric rings, the hole sizes can be varied to accommodate different sizes of vessel simultaneously.

• 
  
• Number of holes in bath lid 12. Each with a maximum hole diameter 80mm.
• 
  
• In each aperture a 4 ring set is fitted.
• 
  
• Centre ring - removed, aperture 30mm diameter hole.
• 
  
• Ring 1 - removed, aperture 42mm diameter hole.
• 
  
• Ring 2 - removed, aperture 58mm diameter hole.
• 
  
• Ring 3 - removed, maximum diameter 80mm hole.

The constant level maintains liquid level during boiling. Use standard laboratory tubing and connect one outlet to a tap and adjust the water supply to maintain boiling water level. The other outlet acts as an overflow to a sink or drain. The constant level features a spout allowing quick visible checks that the water supply is being maintained in use.

1. All baths have an integral constant level device to regulate the level of water.

2. Supplied with concentric ringed lid to vary the diameter holes.

3. Accessory Energy Regulator ER-1 can be used for control between vigorous boil and gentle simmer.

4. Smooth walled tank making it easy to clean and de-scale.

5. Each bath is uniquely identified with its own serial number recorded on our product database, which includes all of its manufacturing inspection data. Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.

1102E

Rectangular, stainless steel electrically heated, multi-place bath with fixed temperature for boiling water, fitted with concentric ringed lid to vary the hole size.

The steam produced provides an effective source of heat for samples:

• 
  
• that may be otherwise thermally damaged by a naked flame
• 
  
• used for applications to distil/concentrate liquids, melt agar and other solids
• 
  
• metallurgical analysis, protein analysis and bacteriological examinations
• 
  

Features an integral constant level device to maintain constant water level during boiling and supplied with a set of rings to vary the diameter of aperture to accommodate different sizes of vessels e.g. evaporating dishes and glassware, including round-bottom flasks.

Fitted with a sheathed immersion element and a resettable thermal cut-out for safety with heater indicator.

The bath provides constant boiling water for gentle heating of samples.

Accessory ER-1 Energy Regulator can be connected to boiling bath allowing control of the amount of boiling from a gentle simmer to a vigorous boil.

Always site the boiling bath on a heat proof surface.

Always connect the constant level with laboratory tubing to a water supply, adjust the flow to gently top up the water level, whilst maintaining boiling.

The constant level device has a visible water spout to check that water in the boiling bath is maintaining working level. This prevents the chance of the water bath being boiled dry.

Manual reset cut out.

Always read the instruction book.

1000W

2 Years

By removing concentric rings, the hole sizes can be varied to accommodate different sizes of vessel simultaneously.

• 
  
• Number of holes in bath lid 6 off with maximum hole diameter 80mm.
• 
  
• In each aperture a 5 ring set is fitted.
• 
  
• Centre ring - removed, aperture 30mm diameter hole.
• 
  
• Ring 1 - removed, aperture 42mm diameter hole.
• 
  
• Ring 2 - removed, aperture 58mm diameter hole.
• 
  
• Ring 3 - removed, maximum diameter 80mm hole.
• 
  
• Ring 4 - removed, maximum diameter 101mm hole.

The constant level maintains liquid level during boiling. Use standard laboratory tubing and connect one outlet to a tap and adjust the water supply to maintain boiling water level. The other outlet acts as an overflow to a sink or drain.

1. All baths have an integral constant level device to regulate the level of water.

2. Supplied with concentric ringed lid to vary the diameter holes.

3. Accessory Energy Regulator ER-1 can be used for control between vigorous boil and gentle simmer.

4. Smooth walled tank making it easy to clean and de-scale.

5. Each bath is uniquely identified with its own serial number recorded on our product database, which includes all of its manufacturing inspection data. Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.