Nickel-Electro ltd.

1026ER

Round, stainless steel electrically heated, regulates from a gentle simmer to a vigorous boil, fitted with concentric ringed lid to vary the hole size.

The steam produced provides an effective source of heat for samples:

• 
  
• that may be otherwise thermally damaged by a naked flame
• 
  
• used for applications to distill/concentrate liquids, melt agar and other solids
• 
  
• metallurgical analysis, protein analysis and bacteriological examinations
• 
  

Features an integral constant level device to maintain constant water level during boiling and supplied with a set of rings to vary the diameter of aperture to accommodate different sizes of vessels e.g. evaporating dishes and glassware, including round-bottom flasks.

Features a built-in energy regulator, which controls the amount of boiling in a bath from a gentle simmer to a vigorous boil.

Fitted with a sheathed immersion element and a resettable thermal cut-out for safety with heater indicator.

The bath provides constant boiling water for gentle heating of samples in steam. Always site the boiling bath on a heat proof surface.

Always connect the constant level with laboratory tubing to a water supply, adjust the flow to gently top up the water level, whilst maintaining boiling.

The constant level device has a visible water spout to check that water in the boiling bath is maintaining working level. This prevents the chance of the water bath being boiled dry.

Manual reset cut out.

Always read the instruction book.

1000W

2 Years

By removing concentric rings, the hole sizes can be varied to accommodate different sizes of vessel.

• 
  
• Centre ring - removed, aperture 30mm diameter hole.
• 
  
• Ring 1 - removed, aperture 42mm diameter hole.
• 
  
• Ring 2 - removed, aperture 58mm diameter hole.
• 
  
• Ring 3 - removed, aperture 78mm hole.
• 
  
• Ring 4 - removed, aperture 103mm hole.
• 
  
• Ring 5 - removed, aperture 128mm hole.
• 
  
• Ring 6 - removed, aperture 153mm hole.

The constant level maintains liquid level during boiling. Use standard laboratory tubing and connect one outlet to a tap and adjust the water supply to maintain boiling water level. The other outlet acts as an overflow to a sink or drain..

1. All baths have an integral constant level device to regulate the level of water.

2. Supplied with concentric ringed lid to vary the diameter holes.

3. Smooth walled tank making it easy to clean and de-scale.

4. Each bath is uniquely identified with its own serial number recorded on our product database, which includes all of its manufacturing inspection data. Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.

1026E

Round, stainless steel electrically heated with fixed temperature for boiling water, fitted with concentric ringed lid to vary the hole size.

The steam produced provides an effective source of heat for samples:

• 
  
• that may be otherwise thermally damaged by a naked flame
• 
  
• used for applications to distill/concentrate liquids, melt agar and other solids
• 
  
• metallurgical analysis, protein analysis and bacteriological examinations
• 
  

Features an integral constant level device to maintain constant water level during boiling and supplied with a set of rings to vary the diameter of aperture to accommodate different sizes of vessels e.g. evaporating dishes and glassware, including round-bottom flasks.

Fitted with a sheathed immersion element and a resettable thermal cut-out for safety with heater indicator

The bath provides constant boiling water for gentle heating of samples by steam.

Accessory ER-1 Energy Regulator can be connected to boiling bath allowing control of the amount of boiling from a gentle simmer to a vigorous boil.

Always site the boiling bath on a heat proof surface.

Always connect the constant level with laboratory tubing to a water supply, adjust the flow to gently top up the water level, whilst maintaining boiling.

The constant level device has a visible water spout to check that water in the boiling bath is maintaining working level. This prevents the chance of the water bath being boiled dry.

Manual reset cut out.

Always read the instruction book.

1000W

2 Years

By removing concentric rings, the hole size can be varied to accommodate different sizes of vessel.

• 
  
• Centre ring - removed, aperture 30mm diameter hole.
• 
  
• Ring 1 - removed, aperture 42mm diameter hole.
• 
  
• Ring 2 - removed, aperture 58mm diameter hole.
• 
  
• Ring 3 - removed, aperture 78mm hole.
• 
  
• Ring 4 - removed, aperture 103mm hole.
• 
  
• Ring 5 - removed, aperture 128mm hole.
• 
  
• Ring 6 - removed, aperture 153mm hole.

The constant level maintains liquid level during boiling. Use standard laboratory tubing and connect one outlet to a tap and adjust the water supply to maintain boiling water level. The other outlet acts as an overflow to a sink or drain.

1. All baths have an integral constant level device to regulate the level of water.

2. Supplied with concentric ringed lid to vary the diameter of holes.

3. Accessory Energy Regulator ER-1 can be used for control between vigorous boil and gentle simmer.

4. Smooth walled tank making it easy to clean and de-scale.

5. Each bath is uniquely identified with its own serial number recorded on our product database, which includes all of its manufacturing inspection data. Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.