NE4-8T
Thermostatic Thermostirrer complete with 8 Litre Stainless Steel Tank
« Return to Water Baths Stirred
Internal: 129w x 300d x 150h mm
Water level: Maximum 130mm shelf fitted working depth 85mm
Packed size: 45 x 41 x 32cm
The stainless steel tank is contained within a sturdy outer case and supplied complete with a stainless steel shelf, which provides good water circulation and temperature stability.
Clifton Range® Thermostirrer is a durable stainless steel construction, painted surfaces are powder painted with tough anti-bacterial finish with good chemical resistance. Easy to use controls that wipe clean and have an anti-bacterial finish. Immersed components are corrosion resistant. Quiet running in use and providing good water temperature stability. Indication of heating and low liquid levels.
- 6 mins
- 17 mins
- 35 mins
0.4kWh @ 60°C - lid fitted
The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and measured consumption at set point. Please remember that the energy consumption may vary due to factors such as its location, ventilation, ambient temperatures and loading.
2. Efficient water movement and temperature control provides accurate temperature stability throughout the water bath.
3. Three-year warranty and comprehensive customer support.
4. Broad range of accessories available to suit a wide range of applications.
5. Before leaving our factory every water bath is identified with a unique serial number and undergoes a factory calibration adjusting control to known traceable value, electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.
6. Thermostirrer control panel and painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfections. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the paint finish.
Stainless Steel Gable Lid to fit 8 Litre Stirred Baths
Clifton® Stainless steel Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use
Flat Lid, Stainless steel, 8 litre baths
Stainless steel construction with wipe clean surfaces. These LD4 Lids provide insulation and consistent water bath performance, reduce energy consumption and running costs. In use they reduce airborne particles contaminating the water. Fitted with insulated lifting handle for convenience.
Polypropylene Spheres
This blanket of hollow spheres is ideal for open tanks of water. Reduces thermal losses - Savings of up to 75% can be achieved with a single layer - Increase energy saving & reducing costs. A single layer of spheres covers 91% of the liquid surface trapping air in the gaps which adds to the thermal insulation properties. Reduces steaming - vapour losses reduced by 90%. Reduce vapours & splashing. No impedance to workload.
Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Cooling Coil - water feed for background cooling
The Cooling Coil immerses into Clifton® Stirred or Circulating water bath, behind the Stirrer, without affecting bath working area. When connected to a cold water supply it provides counter cooling depending on tap water temperature and flow rate.
Draining Syphon
Allows the easy and quick emptying of water baths, immerse into water bath, squeeze the bellow and point the outlet to a bucket or sink.
Calibration Record
Factory Calibration record must be ordered with equipment.
NE4-14T
Thermostatic Thermostirrer complete with 14 Litre Stainless Steel Tank
« Return to Water Baths Stirred
Internal: 219w x 298d x 150hmm
Packed: 450 x 410 x 320mm
The stainless steel tank is contained within a sturdy outer case and supplied complete with a stainless steel shelf, which provides good water circulation and temperature stability.
Clifton Range® Thermostirrer is a durable stainless steel construction, painted surfaces are powder painted with tough anti-bacterial finish with good chemical resistance. Easy to use controls that wipe clean and have an anti-bacterial finish. Immersed components are corrosion resistant. Quiet running in use and providing good water temperature stability. Indication of heating and low liquid levels.
- 8 mins
- 22 mins
- 52 mins
The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and measured consumption at set point. Please remember that the energy consumption may vary due to factors such as its location, ventilation, ambient temperatures and loading.
2. Efficient water movement and temperature control provides accurate temperature stability throughout the water bath.
3. Three-year warranty and comprehensive customer support.
4. Broad range of accessories available to suit a wide range of applications.
5. Before leaving our factory every water bath is identified with a unique serial number and undergoes a factory calibration adjusting control to known traceable value, electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.
6. Thermostirrer control panel and painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfections. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the paint finish.
Stainless Steel Gable Lid to fit 14 Litre Stirred Baths
Clifton® Stainless steel Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use
Flat Lid, Stainless steel, 14 litre baths
Stainless steel construction with wipe clean surfaces. These LD4 Lids provide insulation and consistent water bath performance, reduce energy consumption and running costs. In use they reduce airborne particles contaminating the water. Fitted with insulated lifting handle for convenience.
Stainless Steel Raised Shelf to suit 14, 22, 28 and 38 Litre Baths
Simple solution for placing shallow vessels in a stirred bath. Manufactured from stainless steel. The raised shelf is perforated to allow free circulation of water. Can be easily removed and cleaned.
Polypropylene Spheres
This blanket of hollow spheres is ideal for open tanks of water. Reduces thermal losses - Savings of up to 75% can be achieved with a single layer - Increase energy saving & reducing costs. A single layer of spheres covers 91% of the liquid surface trapping air in the gaps which adds to the thermal insulation properties. Reduces steaming - vapour losses reduced by 90%. Reduce vapours & splashing. No impedance to workload.
Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Cooling Coil - water feed for background cooling
The Cooling Coil immerses into Clifton® Stirred or Circulating water bath, behind the Stirrer, without affecting bath working area. When connected to a cold water supply it provides counter cooling depending on tap water temperature and flow rate.
Draining Syphon
Allows the easy and quick emptying of water baths, immerse into water bath, squeeze the bellow and point the outlet to a bucket or sink.
Calibration Record
Factory Calibration record must be ordered with equipment.
PDF File Product Literature
NE4-22T
Thermostatic Thermostirrer complete with 22 Litre Stainless Steel Tank
« Return to Water Baths Stirred
Internal: 395w x 298d x 150h mm
Packed: 620 x 410 x 370mm
The stainless steel tank is contained within a sturdy outer case and supplied complete with a stainless steel shelf, which provides good water circulation and temperature stability.
Clifton® Thermostirrer is a durable stainless steel construction, painted surfaces are powder painted with tough anti-bacterial finish with good chemical resistance. Easy to use controls that wipe clean and have an anti-bacterial finish. Immersed components are corrosion resistant. Quiet running in use and providing good water temperature stability. Indication of heating and low liquid levels.
- 10 mins
- 33 mins
- 84 mins
The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and measured consumption at set point. Please remember that the energy consumption may vary due to factors such as its location, ventilation, ambient temperatures and loading.
2. Efficient water movement and temperature control provides accurate temperature stability throughout the water bath.
3. Three-year warranty and comprehensive customer support.
4. Broad range of accessories available to suit a wide range of applications.
5. Before leaving our factory every water bath is identified with a unique serial number and undergoes a factory calibration adjusting control to known traceable value, electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.
6. Thermostirrer control panel and painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfections. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the paint finish.
Stainless Steel Gable Lid to fit 22 and 28 Litre Stirred Baths
Clifton® Stainless steel Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use
Flat Lid, Stainless steel, 22/28 litre baths
Stainless steel construction with wipe clean surfaces. These LD4 Lids provide insulation and consistent water bath performance, reduce energy consumption and running costs. In use they reduce airborne particles contaminating the water. Fitted with insulated lifting handle for convenience.
Polypropylene Spheres
This blanket of hollow spheres is ideal for open tanks of water. Reduces thermal losses - Savings of up to 75% can be achieved with a single layer - Increase energy saving & reducing costs. A single layer of spheres covers 91% of the liquid surface trapping air in the gaps which adds to the thermal insulation properties. Reduces steaming - vapour losses reduced by 90%. Reduce vapours & splashing. No impedance to workload.
Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Raised Shelf to suit 22, 28 and 38 Litre Baths
Simple solution for placing shallow vessels in a stirred bath. Manufactured from stainless steel. The raised shelf is perforated to allow free circulation of water. Can be easily removed and cleaned.
Cooling Coil - water feed for background cooling
The Cooling Coil immerses into Clifton® Stirred or Circulating water bath, behind the Stirrer, without affecting bath working area. When connected to a cold water supply it provides counter cooling depending on tap water temperature and flow rate.
Draining Syphon
Allows the easy and quick emptying of water baths, immerse into water bath, squeeze the bellow and point the outlet to a bucket or sink.
Calibration Record
Factory Calibration record must be ordered with equipment.
PDF File Product Literature
NE4-28T
Thermostatic Thermostirrer complete with 28 Litre Stainless Steel Tank
« Return to Water Baths Stirred
Internal: 395w x 298d x 200h mm
Packed: 620 x 410 x 370mm
The stainless steel tank is contained within a sturdy outer case and supplied complete with a stainless steel shelf, which provides good water circulation and temperature stability.
Clifton® Thermostirrer is a durable stainless steel construction, painted surfaces are powder painted with tough anti-bacterial finish with good chemical resistance. Easy to use controls that wipe clean and have an anti-bacterial finish. Immersed components are corrosion resistant. Quiet running in use and providing good water temperature stability. Indication of heating and low liquid levels.
- 20 mins
- 50 mins
The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and measured consumption at set point. Please remember that the energy consumption may vary due to factors such as its location, ventilation, ambient temperatures and loading.
2. Efficient water movement and temperature control provides accurate temperature stability throughout the water bath.
3. Three-year warranty and comprehensive customer support.
4. Broad range of accessories available to suit a wide range of applications.
5. Before leaving our factory every water bath is identified with a unique serial number and undergoes a factory calibration adjusting control to known traceable value, electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.
6. Thermostirrer control panel and painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfections. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the paint finish.
Stainless Steel Gable Lid to fit 22 and 28 Litre Stirred Baths
Clifton® Stainless steel Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use
Drain Tap - for Water baths with serial numbers greater than 75100
1. Providing a gated on/off valve to empty fluids conveniently from the bath.
2. Nozzle supplied with tap for laboratory tubing.
Flat Lid, Stainless steel, 22/28 litre baths
Stainless steel construction with wipe clean surfaces. These LD4 Lids provide insulation and consistent water bath performance, reduce energy consumption and running costs. In use they reduce airborne particles contaminating the water. Fitted with insulated lifting handle for convenience.
Polypropylene Spheres
This blanket of hollow spheres is ideal for open tanks of water. Reduces thermal losses - Savings of up to 75% can be achieved with a single layer - Increase energy saving & reducing costs. A single layer of spheres covers 91% of the liquid surface trapping air in the gaps which adds to the thermal insulation properties. Reduces steaming - vapour losses reduced by 90%. Reduce vapours & splashing. No impedance to workload.
Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Raised Shelf to suit 22, 28 and 38 Litre Baths
Simple solution for placing shallow vessels in a stirred bath. Manufactured from stainless steel. The raised shelf is perforated to allow free circulation of water. Can be easily removed and cleaned.
Cooling Coil - water feed for background cooling
The Cooling Coil immerses into Clifton® Stirred or Circulating water bath, behind the Stirrer, without affecting bath working area. When connected to a cold water supply it provides counter cooling depending on tap water temperature and flow rate.
Draining Syphon
Allows the easy and quick emptying of water baths, immerse into water bath, squeeze the bellow and point the outlet to a bucket or sink.
Calibration Record
Factory Calibration record must be ordered with equipment.
PDF File Product Literature