NE4-HT Circulators Digital Water and Oil Baths

NE4-HT

Digital water and oil Circulator

« Return to Water Baths Stirred

Dimensions
External: 125w x 230d x 350h mm Overall sizes, height includes heater
Packed: 35 x 33 x 34cm
Capacity
Nominal Tank Capacity: 8 litres to 56 litres For use with water baths, tanks and containers within these volumes
Temperature Range
Ambient +5°C - 130°CAccessory DC1-300 or DC2-300 provides cooling from ambient to -20°C
Temperature control
PID Digital, 4 digit LED display, resolution 0.1°C
Temperature alarm
Under/over temperature alarm is automatically set 4˚C above and 4˚C below set point.
Sensitivity
±0.05°C
Uniformity
±0.01°C
Timer
Variable 00:01 to 99:59 hh:mm Activates at set temperature. End timed period, audible buzzer and end message
Pump capacity and pressure
10 litres/min - 150mbar Pressue drop can occur with pipe height, length, bore, bends and liquid temperatures below ambient
Pump connection ports
Inlet and outlet ports take 4mm bore x 6mm o/d tubing
Heater Power (220-240V)
1250W
Voltage
120V or 230V models 50-60Hz
Packed Weight
5 kg
Product Code
NE4-HT
Description
Clifton® Digital Water and Oil Heating Circulators are designed for external circulation of temperature controlled water and heat transfer fluids in a closed circuit or for maintaining a stable temperature environment in the bath for the immersion of flasks,bottles and racks.

Thermocirculator can be fitted to water baths, tanks and containers using accessory Mount Bracket.

Clifton® Thermostirrer is a durable stainless steel construction, painted surfaces are powder painted with tough anti-bacterial finish with good chemical resistance. Easy to use controls that wipe clean and have an anti-bacterial finish. Immersed components are corrosion resistant. Quiet running in use and providing excellent water temperature stability. Indication of heating, over temperature alarm and timer running.

When a low liquid level is detected a “FiLL” message automatically appears and heating is suspended. Once refilled, heating is restored and temperature control resumes automatically.

Over and under temperature alarms automatically protect work in the water bath, providing heater cut off, visual message and indicator.

A second safety device can be set just above the working temperature, protecting samples.

Thermocirculator pump comes with convenient push-fit and lock fittings on both inlet and outlet ports for secure external liquid circulation.
Controls
Featuring a bold LED display of measured temperatures in real-time and in increments of ±0.1°C, using a precision PID temperature controller. Setting for water temperature only or combination of temperature and time. Timer setting variable in 1-minute increments from 00:01 [hh:mm] to 99:59 [hh:mm] with “end” message on completion of the timed period. Time and temperature settings are retained in the memory, even after the unit has been turned off.

Easy to use controls, utilising touch keypads for setting time and temperature values with indicators for heating, over temperature alarm and timer.

The heater unit can be set to run at a set temperature or commence the timer once the water reaches set temperature.

Features auto setting over and under temperature alarm protecting your work at set temperature.

Every unit undergoes a factory calibration at two temperatures for validation.

A second safety device can be set just above the working temperature, protecting samples.
Safety Features
Features a low liquid level float switch which ensures heating is switched off if the liquid falls below the recommended level the display will show “FiLL”. Heating is switched off but stirring continues. To reset carefully top up the liquid to the recommended level.

The under/over temperature alarm is automatically set 4˚C above and 4˚C below set temperature. When in alarm condition the indicator illuminates and actual bath temperature is shown. If bath is over temperature both heating and stirring are switched off. Once liquid temperature has fallen or risen above/below the alarm setting, the indicator clears and actual bath temperature is shown.

A second safety device can be set just above the working temperature, protecting samples.
Heat-up Times
  • 8 mins
  • 15 mins
  • 35 mins
  • 90 mins
  • 140 mins
  • 210 mins
Heating/Cooling Information
For water temperatures below ambient we recommend a glycol/water mix or accessory solution LB-5.0 Lab Bath. A lid or layer of spheres will act as an insulator. For cooling, an accessory DC1-300 Immersion Cooler can be used. We recommend operating the water bath in an ambient temperature 20°C.

For water temperatures above 60°C we recommend that an accessory lid or layer of spheres are used for optimum performance. This will reduce evaporation and a lid will keep the samples and water free from contamination. Optimum performance saves energy by reducing electricity consumption and running costs.
Recommended fluids
100% water: 5°C to 99°C

50% water 50% glycol: -20°C to 90°C

Lab Bath 4590: -15°C to 90°C

Silicone oils, up to 10 centistokes, synthetic thermal liquids: 99°C to 130°C.

Power Consumption (220-240V)
1300W
Warranty Period
3 Years
Features and Benefits
1. Clifton® Digital Water and Oil Heating Circulators are designed for external circulation of temperature controlled water and heat transfer fluids in a closed circuit or for maintaining a stable temperature environment in the bath for the immersion of flasks,bottles and racks.

2. Efficient water movement and temperature control provides accurate temperature stability throughout the water bath.

3. Three-year warranty and comprehensive customer support.

4. Broad range of accessories available to suit a wide range of applications.

5. Before leaving our factory every water bath is identified with a unique serial number and undergoes a factory calibration adjusting control to known traceable value, electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.

6. Thermostirrer control panel and painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfections. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the paint finish.

Polypropylene Spheres

This blanket of hollow spheres is ideal for open tanks of water. Reduces thermal losses - Savings of up to 75% can be achieved with a single layer - Increase energy saving & reducing costs. A single layer of spheres covers 91% of the liquid surface trapping air in the gaps which adds to the thermal insulation properties. Reduces steaming - vapour losses reduced by 90%. Reduce vapours & splashing. No impedance to workload.

Mounting Bracket

1. Allows use of existing Tanks with NE4 series Thermostirrers.

2. Easy to fit.

3. Manufactured from 304 stainless steel.

4. Allows mounting of NE4 series Thermostirrer in any position around a tank.

Calibration Record

Where equipment requires a Calibration record please order when buying equipment from Clifton® range.

NE4-8HT

Digital Water + Oil Circulator complete with 8 Litre Stainless Steel Tank and Shelf

« Return to Water Baths Stirred

Dimensions
External: 271w x 332d x 170h mm Thermocirculator additional 120mm to bath height
Internal: 129w x 300d x 150h mm
Water level: Maximum 130mm shelf fitted working depth 85mm
Packed: 45 x 41 x 32cm
Capacity
Nominal Tank Capacity: 8 Litres
Temperature Range
Ambient +5°C - 130°CAccessory DC1-300 or DC2-300 provides cooling from ambient to -20°C
Temperature control
PID Digital, 4 digit LED display, resolution 0.1°C
Temperature alarm
Under/over temperature alarm is automatically set 4˚C above and 4˚C below set point.
Sensitivity
±0.05°C
Uniformity
±0.01°C
Timer
Variable 00:01 to 99:59 hh:mm Activates at set temperature. End timed period, audible buzzer and end message
Pump capacity and pressure
10 litres/min - 150mbar Pressue drop can occur with pipe height, length, bore, bends and liquid temperatures below ambient
Pump connection ports
Inlet and outlet ports take 4mm bore x 6mm o/d tubing
Heater Power (220-240V)
1250W
Voltage
120V or 230V models 50-60Hz
Packed Weight
9.2 kg
Product Code
NE4-8HT
Description
Clifton® Digital Water and Oil Heating Circulators are designed for external circulation of temperature controlled water and heat transfer fluids in a closed circuit or for maintaining a stable temperature environment in the bath for the immersion of flasks,bottles and racks.


Thermocirculator can be fitted to water baths, tanks and containers using accessory Mount Bracket.

Clifton® Thermostirrer is a durable stainless steel construction, painted surfaces are powder painted with tough anti-bacterial finish with good chemical resistance. Easy to use controls that wipe clean and have an anti-bacterial finish. Immersed components are corrosion resistant. Quiet running in use and providing excellent water temperature stability. Indication of heating, over temperature alarm and timer running.

When a low liquid level is detected a “FiLL” message automatically appears and heating is suspended. Once refilled, heating is restored and temperature control resumes automatically.

Over and under temperature alarms automatically protect work in the water bath, providing heater cut off, visual message and indicator.

A second safety device can be set just above the working temperature, protecting samples.

Thermocirculator pump comes with convenient push-fit and lock fittings on both inlet and outlet ports for secure external liquid circulation.
Controls
Featuring a bold LED display of measured temperatures in real-time and in increments of ±0.1°C, using a precision PID temperature controller. Setting for water temperature only or combination of temperature and time. Timer setting variable in 1-minute increments from 00:01 [hh:mm] to 99:59 [hh:mm] with “end” message on completion of the timed period. Time and temperature settings are retained in the memory, even after the unit has been turned off.

Easy to use controls, utilising touch keypads for setting time and temperature values with indicators for heating, over temperature alarm and timer.

The heater unit can be set to run at a set temperature or commence the timer once the water reaches set temperature.

Features auto setting over and under temperature alarm protecting your work at set temperature.

Every unit undergoes a factory calibration at two temperatures for validation.

A second safety device can be set just above the working temperature, protecting samples.
Safety Features
Features a low liquid level float switch which ensures heating is switched off if the liquid falls below the recommended level the display will show “FiLL”. Heating is switched off but stirring continues. To reset carefully top up the liquid to the recommended level.

The under/over temperature alarm is automatically set 4˚C above and 4˚C below set temperature. When in alarm condition the indicator illuminates and actual bath temperature is shown. If bath is over temperature both heating and stirring are switched off. Once liquid temperature has fallen or risen above/below the alarm setting, the indicator clears and actual bath temperature is shown.

A second safety device can be set just above the working temperature, protecting samples.
Heat-up Times
  • 8 mins
  • 15 mins
  • 35 mins
  • 50 mins
  • 90 mins
  • 140 mins
  • 210 mins
Heating/Cooling Information
For water temperatures below ambient we recommend a glycol/water mix or accessory solution LB-5.0 Lab Bath. A lid or layer of spheres will act as an insulator. For cooling, an accessory DC1-300 Immersion Cooler can be used. We recommend operating the water bath in an ambient temperature 20°C.

For water temperatures above 60°C we recommend that an accessory lid or layer of spheres are used for optimum performance. This will reduce evaporation and a lid will keep the samples and water free from contamination. Optimum performance saves energy by reducing electricity consumption and running costs.
Recommended fluids
100% water: 5°C to 99°C

50% water 50% glycol: -20°C to 90°C

Lab Bath 4590: -15°C to 90°C

Silicone oils, up to 10 centistokes, synthetic thermal liquids: 99°C to 130°C.

Power Consumption (220-240V)
1300W
Energy Consumption
0.5kWh @ 37°C

The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and measured consumption at set point. Please remember that the energy consumption may vary due to factors such as its location, ventilation, ambient temperatures and loading.
Warranty Period
3 Years
Features and Benefits
1. Clifton® Digital Water and Oil Heating Circulators are designed for external circulation of temperature controlled water and heat transfer fluids in a closed circuit or for maintaining a stable temperature environment in the bath for the immersion of flasks,bottles and racks.

2. Efficient water movement and temperature control provides accurate temperature stability throughout the water bath.

3. Three-year warranty and comprehensive customer support.

4. Broad range of accessories available to suit a wide range of applications.

5. Before leaving our factory every water bath is identified with a unique serial number and undergoes a factory calibration adjusting control to known traceable value, electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.

6. Thermostirrer control panel and painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfections. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the paint finish.

Stainless Steel Gable Lid to fit 8 Litre Stirred Baths

Clifton® Stainless steel Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use

Flat Lid, Stainless steel, 8 litre baths

Stainless steel construction with wipe clean surfaces. These LD4 Lids provide insulation and consistent water bath performance, reduce energy consumption and running costs. In use they reduce airborne particles contaminating the water. Fitted with insulated lifting handle for convenience.

Polypropylene Spheres

This blanket of hollow spheres is ideal for open tanks of water. Reduces thermal losses - Savings of up to 75% can be achieved with a single layer - Increase energy saving & reducing costs. A single layer of spheres covers 91% of the liquid surface trapping air in the gaps which adds to the thermal insulation properties. Reduces steaming - vapour losses reduced by 90%. Reduce vapours & splashing. No impedance to workload.

Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Flat n Fold™ Stainless Steel Test Tube Rack 26 Hole x 17mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat, fold to shape. Suitable for test tubes with an external diameter 16mm, hole size in rack 17mm. Folded rack dimensions 270w x 70d x 95h mm. Can be cleaned with detergents, ultrasonics or autoclaved.

Flat n Fold™ Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat, fold to shape. Suitable for test tubes with an external diameter 25mm, hole size in rack 26mm. Folded rack dimensions 270w x 70d x 95h mm. Can be cleaned with detergents, ultrasonics or autoclaved.

Flat n Fold™ Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat, fold to shape. Suitable for test tubes with an external diameter 12mm, hole size in rack 13mm. Folded rack dimensions 270w x 70d x 95h mm. Can be cleaned with detergents, ultrasonics or autoclaved.

Flat n Fold™ Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat, fold to shape. Suitable for test tubes with an external diameter 18mm, hole size in rack 19mm. Folded rack dimensions 270w x 70d x 95h mm. Can be cleaned with detergents, ultrasonics or autoclaved.

Flat n Fold™ Stainless Steel Test Tube Rack 14 Holes x 32mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat, fold to shape. Suitable for test tubes with an external diameter 31mm, hole size in rack 32mm. Folded rack dimensions 270w x 70d x 95h mm. Can be cleaned with detergents, ultrasonics or autoclaved.

Push fit and lock insulated hose 1m length x 6mm dia.

Flexible polyurethane tubing for connecting to inlet and outlet ports on Clifton Circulating Water baths.

Push fit and lock insulated hose 2m length x 6mm dia.

Flexible polyurethane tubing for connecting to inlet and outlet ports on Clifton Circulating Water baths.

Lab Bath 4590 Heat Transfer Fluid

Heat transfer fluid working temperature range -15° to +90°C, provides complete protection from freezing, corrosion and algal growth which can wear and damage pumps. Non-Toxic, Non-flammable, Environmentally safe and good heat transfer properties.

Lab Bath 4590 Heat Transfer Fluid

Heat transfer fluid working temperature range -15° to +90°C, provides complete protection from freezing, corrosion and algal growth which can wear and damage pumps. Non-Toxic, Non-flammable, Environmentally safe and good heat transfer properties.

Cooling Coil - water feed for background cooling

The Cooling Coil immerses into Clifton® Stirred or Circulating water bath, behind the Stirrer, without affecting bath working area. When connected to a cold water supply it provides counter cooling depending on tap water temperature and flow rate.

Immersion Dip Cooler [ambient to -20°C]

Designed to be used in conjunction with a Clifton® Stirred or Circulating water baths. The immersion coil fits into the rear access hole behind the Thermostirrer without sacrificing the working area. The immersion cooler runs continuously providing counter cooling with bath providing temperature control from ambient to -20°C.

Immersion Dip Cooler (ambient to -20°C)

Designed to be used in conjunction with a Clifton® Stirred or Circulating water baths. The immersion coil fits into the rear access hole behind the Thermostirrer without sacrificing the working area. The immersion cooler runs continuously providing counter cooling with bath providing temperature control from ambient to -20°C. This model is the more powerful refrigeration Immersion Cooler makes it particularly beneficial for larger volume water baths.

Thermometer Clip Complete With Bent Stem Spirit Filled Thermometer

Used as a reference to measure actual water temperature of the water bath. Thermometer range 0° to 100°C graduated in 2°C divisions.

Draining Syphon

Allows the easy and quick emptying of water baths, immerse into water bath, squeeze the bellow and point the outlet to a bucket or sink.

Calibration Record

Where equipment requires a Calibration record please order when buying equipment from Clifton® range.

NE4-14HT

Digital Water and Oil Circulator complete with 14 Litre Stainless Steel Tank and Shelf

« Return to Water Baths Stirred

Dimensions
External: 361w x 332d x 170h mmThermocirculator additional 120mm to bath height
Internal: 219w x 298d x 150h mm - working area of the bath
Water level: Maximum 130mm shelf fitted working depth 85mm
Packed: 45 x 41 x 32cm
Capacity
Nominal Tank Capacity: 14 Litres
Temperature Range
Ambient +5°C - 130°CAccessory DC1-300 or DC2-300 provides cooling from ambient to -20°C
Temperature control
PID Digital, 4 digit LED display, resolution 0.1°C
Temperature alarm
Under/over temperature alarm is automatically set 4˚C above and 4˚C below set point.
Sensitivity
±0.05°C
Uniformity
±0.01°C
Timer
Variable 00:01 to 99:59 hh:mm Activates at set temperature. End timed period, audible buzzer and end message
Pump capacity and pressure
10 litres/min - 150mbar Pressue drop can occur with pipe height, length, bore, bends and liquid temperatures below ambient
Pump connection ports
Inlet and outlet ports take 4mm bore x 6mm o/d tubing
Heater Power (220-240V)
1250W
Voltage
120V or 230V models 50-60Hz
Packed Weight
10 kg
Product Code
NE4-14HT
Description
Clifton® Digital Water and Oil Heating Circulators are designed for external circulation of temperature controlled water and heat transfer fluids in a closed circuit or for maintaining a stable temperature environment in the bath for the immersion of flasks,bottles and racks..

Thermocirculator can be fitted to water baths, tanks and containers using accessory Mount Bracket.

Clifton® Thermostirrer is a durable stainless steel construction, painted surfaces are powder painted with tough anti-bacterial finish with good chemical resistance. Easy to use controls that wipe clean and have an anti-bacterial finish. Immersed components are corrosion resistant. Quiet running in use and providing excellent water temperature stability. Indication of heating, over temperature alarm and timer running.

When a low liquid level is detected a “FiLL” message automatically appears and heating is suspended. Once refilled, heating is restored and temperature control resumes automatically.

Over and under temperature alarms automatically protect work in the water bath, providing heater cut off, visual message and indicator.

A second safety device can be set just above the working temperature, protecting samples.

Thermocirculator pump comes with convenient push-fit and lock fittings on both inlet and outlet ports for secure external liquid circulation
Controls
Featuring a bold LED display of measured temperatures in real-time and in increments of ±0.1°C, using a precision PID temperature controller. Setting for water temperature only or combination of temperature and time. Timer setting variable in 1-minute increments from 00:01 [hh:mm] to 99:59 [hh:mm] with “end” message on completion of the timed period. Time and temperature settings are retained in the memory, even after the unit has been turned off.

Easy to use controls, utilising touch keypads for setting time and temperature values with indicators for heating, over temperature alarm and timer.

The heater unit can be set to run at a set temperature or commence the timer once the water reaches set temperature.

Features auto setting over and under temperature alarm protecting your work at set temperature.

Every unit undergoes a factory calibration at two temperatures for validation.

A second safety device can be set just above the working temperature, protecting samples.
Safety Features
Features a low liquid level float switch which ensures heating is switched off if the liquid falls below the recommended level the display will show “FiLL”. Heating is switched off but stirring continues. To reset carefully top up the liquid to the recommended level.

The under/over temperature alarm is automatically set 4˚C above and 4˚C below set temperature. When in alarm condition the indicator illuminates and actual bath temperature is shown. If bath is over temperature both heating and stirring are switched off. Once liquid temperature has fallen or risen above/below the alarm setting, the indicator clears and actual bath temperature is shown.

A second safety device can be set just above the working temperature, protecting samples.
Heat-up Times
  • 10 mins
  • 26 mins
  • 60 mins
  • 120 mins
  • 180 mins
  • 287 mins
Heating/Cooling Information
For water temperatures below ambient we recommend a glycol/water mix or accessory solution LB-5.0 Lab Bath. A lid or layer of spheres will act as an insulator. For cooling, an accessory DC1-300 Immersion Cooler can be used. We recommend operating the water bath in an ambient temperature 20°C.

For water temperatures above 60°C we recommend that an accessory lid or layer of spheres are used for optimum performance. This will reduce evaporation and a lid will keep the samples and water free from contamination. Optimum performance saves energy by reducing electricity consumption and running costs.
Power Consumption (220-240V)
1300W
Energy Consumption
0.5kWh @ 37°C

The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and measured consumption at set point. Please remember that the energy consumption may vary due to factors such as its location, ventilation, ambient temperatures and loading.
Warranty Period
3 Years
Features and Benefits
1. Clifton® Digital Water and Oil Heating Circulators are designed for external circulation of temperature controlled water and heat transfer fluids in a closed circuit or for maintaining a stable temperature environment in the bath for the immersion of flasks,bottles and racks.

2. Efficient water movement and temperature control provides accurate temperature stability throughout the water bath.

3. Three-year warranty and comprehensive customer support.

4. Broad range of accessories available to suit a wide range of applications.

5. Before leaving our factory every water bath is identified with a unique serial number and undergoes a factory calibration adjusting control to known traceable value, electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.

6. Thermostirrer control panel and painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfections. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the paint finish.

Ringed Lid, stainless steel, 4 x 105mm holes, to suit 14 litre baths

The lid and rings are manufactured from stainless steel. The concentric rings provide varying hole diameters in the lid. In use the lid minimises evaporation and maintains temperature stability of the water bath when tall vessels are being heated at elevated temperatures.

Thermometer Clip Complete With Bent Stem Spirit Filled Thermometer

Used as a reference to measure actual water temperature of the water bath. Thermometer range 0° to 100°C graduated in 2°C divisions.

Polypropylene Spheres

This blanket of hollow spheres is ideal for open tanks of water. Reduces thermal losses - Savings of up to 75% can be achieved with a single layer - Increase energy saving & reducing costs. A single layer of spheres covers 91% of the liquid surface trapping air in the gaps which adds to the thermal insulation properties. Reduces steaming - vapour losses reduced by 90%. Reduce vapours & splashing. No impedance to workload.

Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Gable Lid to fit 14 Litre Stirred Baths

Clifton® Stainless steel Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use

Draining Syphon

Allows the easy and quick emptying of water baths, immerse into water bath, squeeze the bellow and point the outlet to a bucket or sink.

Lab Bath 4590 Heat Transfer Fluid

Heat transfer fluid working temperature range -15° to +90°C, provides complete protection from freezing, corrosion and algal growth which can wear and damage pumps. Non-Toxic, Non-flammable, Environmentally safe and good heat transfer properties.

Cooling Coil - water feed for background cooling

The Cooling Coil immerses into Clifton® Stirred or Circulating water bath, behind the Stirrer, without affecting bath working area. When connected to a cold water supply it provides counter cooling depending on tap water temperature and flow rate.

Immersion Dip Cooler (ambient to -20°C)

Designed to be used in conjunction with a Clifton® Stirred or Circulating water baths. The immersion coil fits into the rear access hole behind the Thermostirrer without sacrificing the working area. The immersion cooler runs continuously providing counter cooling with bath providing temperature control from ambient to -20°C. This model is the more powerful refrigeration Immersion Cooler makes it particularly beneficial for larger volume water baths.

Stainless Steel Hinged Gable Lid to suit 14 Litre Baths

1. The Gable lid has been designed allowing full use of whole width of a Clifton water bath with the lowest height of the gable being 45mm above the bath. This unique feature means test tube racks or flasks can be placed across the whole width of the bath without fouling the lid maximising the bath working area.

2. Designed with customer in mind ensuring where condensation accumulates in use there are no drip points which could spoil work in open flasks in your Clifton water bath.

3. Where an accessory TC-1 Thermometer is used the temperature can be read from the thermometer with the lid in place.

4. Lid fits into the tank ensuring all condensation runs back into the bath and not down the side onto your bench top.

5. The hinged lid has the added advantage where bench space is limited, the lid hinges back to the vertical position to access the bath where as a conventional lid requires lifting off the bath and placing on your bench top.

6. With continuous sampling work a conventional lid has to be removed frequently to access samples/work this hinged lid is designed with this in mind.

7. The Lid hinges back to just over vertical position as in image above.

8. Using the 'Side lifting handle' minimises the risk of hot steam rising from bath reaching your hand in use.

Calibration Record

Where equipment requires a Calibration record please order when buying equipment from Clifton® range.

Push fit and lock insulated hose 2m length x 6mm dia.

Flexible polyurethane tubing for connecting to inlet and outlet ports on Clifton Circulating Water baths.

Push fit and lock insulated hose 1m length x 6mm dia.

Flexible polyurethane tubing for connecting to inlet and outlet ports on Clifton Circulating Water baths.

Flat Lid, Stainless steel, 14 litre baths

Stainless steel construction with wipe clean surfaces. These LD4 Lids provide insulation and consistent water bath performance, reduce energy consumption and running costs. In use they reduce airborne particles contaminating the water. Fitted with insulated lifting handle for convenience.

Lab Bath 4590 Heat Transfer Fluid

Heat transfer fluid working temperature range -15° to +90°C, provides complete protection from freezing, corrosion and algal growth which can wear and damage pumps. Non-Toxic, Non-flammable, Environmentally safe and good heat transfer properties.

Immersion Dip Cooler [ambient to -20°C]

Designed to be used in conjunction with a Clifton® Stirred or Circulating water baths. The immersion coil fits into the rear access hole behind the Thermostirrer without sacrificing the working area. The immersion cooler runs continuously providing counter cooling with bath providing temperature control from ambient to -20°C.

NE4-22HT

Digital Water and Oil Circulator complete with 22 Litre Stainless Steel Tank and Shelf

« Return to Water Baths Stirred

Dimensions
External: 537w x 332d x 170h mm
Internal: 395w x 298d x 150h mm
Water level: Maximum 130mmshelf fitted working depth 85mm
Packed: 62 x 41 x 37cm
Capacity
Nominal Tank Capacity: 22 Litres
Temperature Range
Ambient +5°C - 130°CAccessory DC1-300 or DC2-300 provides cooling from ambient to -20°C
Temperature control
PID Digital, 4 digit LED display, resolution 0.1°C
Temperature alarm
Under/over temperature alarm is automatically set 4˚C above and 4˚C below set point.
Sensitivity
±0.1°C
Uniformity
±0.01°C
Timer
Variable 00:01 to 99:59 hh:mm Activates at set temperature. End timed period, audible buzzer and end message
Pump capacity and pressure
10 litres/min - 150mbar Pressue drop can occur with pipe height, length, bore, bends and liquid temperatures below ambient
Pump connection ports
Inlet and outlet ports take 4mm bore x 6mm o/d tubing
Heater Power (220-240V)
1250W
Voltage
120V or 230V models 50-60Hz
Packed Weight
12 kg
Product Code
NE4-22HT
Description
Clifton® Digital Water and Oil Heating Circulators are designed for external circulation of temperature controlled water and heat transfer fluids in a closed circuit or for maintaining a stable temperature environment in the bath for the immersion of flasks,bottles and racks.

Thermocirculator can be fitted to water baths, tanks and containers using accessory Mount Bracket.

Clifton® Thermostirrer is a durable stainless steel construction, painted surfaces are powder painted with tough anti-bacterial finish with good chemical resistance. Easy to use controls that wipe clean and have an anti-bacterial finish. Immersed components are corrosion resistant. Quiet running in use and providing excellent water temperature stability. Indication of heating, over temperature alarm and timer running.

When a low liquid level is detected a “FiLL” message automatically appears and heating is suspended. Once refilled, heating is restored and temperature control resumes automatically.

Over and under temperature alarms automatically protect work in the water bath, providing heater cut off, visual message and indicator.

A second safety device can be set just above the working temperature, protecting samples.

Thermocirculator pump comes with convenient push-fit and lock fittings on both inlet and outlet ports for secure external liquid circulation.

Controls
Featuring a bold LED display of measured temperatures in real-time and in increments of ±0.1°C, using a precision PID temperature controller. Setting for water temperature only or combination of temperature and time. Timer setting variable in 1-minute increments from 00:01 [hh:mm] to 99:59 [hh:mm] with “end” message on completion of the timed period. Time and temperature settings are retained in the memory, even after the unit has been turned off.

Easy to use controls, utilising touch keypads for setting time and temperature values with indicators for heating, over temperature alarm and timer.

The heater unit can be set to run at a set temperature or commence the timer once the water reaches set temperature.

Features auto setting over and under temperature alarm protecting your work at set temperature.

Every unit undergoes a factory calibration at two temperatures for validation.

A second safety device can be set just above the working temperature, protecting samples.
Safety Features
Features a low liquid level float switch which ensures heating is switched off if the liquid falls below the recommended level the display will show “FiLL”. Heating is switched off but stirring continues. To reset carefully top up the liquid to the recommended level.

The under/over temperature alarm is automatically set 4˚C above and 4˚C below set temperature. When in alarm condition the indicator illuminates and actual bath temperature is shown. If bath is over temperature both heating and stirring are switched off. Once liquid temperature has fallen or risen above/below the alarm setting, the indicator clears and actual bath temperature is shown.

A second safety device can be set just above the working temperature, protecting samples.
Heat-up Times
  • 16 mins
  • 41 mins
  • 90 mins
  • 140 mins
  • 190 mins
  • 400 mins
  • 851 mins
Heating/Cooling Information
For water temperatures below ambient we recommend a glycol/water mix or accessory solution LB-5.0 Lab Bath. A lid or layer of spheres will act as an insulator. For cooling, an accessory DC1-300 Immersion Cooler can be used. We recommend operating the water bath in an ambient temperature 20°C.

For water temperatures above 60°C we recommend that an accessory lid or layer of spheres are used for optimum performance. This will reduce evaporation and a lid will keep the samples and water free from contamination. Optimum performance saves energy by reducing electricity consumption and running costs.
Power Consumption (220-240V)
1300W
Energy Consumption
0.5kWh @ 37°C

The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and measured consumption at set point. Please remember that the energy consumption may vary due to factors such as its location, ventilation, ambient temperatures and loading.

Warranty Period
3 Years
Features and Benefits
1. Clifton® Digital Water and Oil Heating Circulators are designed for external circulation of temperature controlled water and heat transfer fluids in a closed circuit or for maintaining a stable temperature environment in the bath for the immersion of flasks,bottles and racks.

2. Efficient water movement and temperature control provides accurate temperature stability throughout the water bath.

3. Three-year warranty and comprehensive customer support.

4. Broad range of accessories available to suit a wide range of applications.

5. Before leaving our factory every water bath is identified with a unique serial number and undergoes a factory calibration adjusting control to known traceable value, electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.

6. Thermostirrer control panel and painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfections. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the paint finish.

Stainless Steel Gable Lid to fit 22 and 28 Litre Stirred Baths

Clifton® Stainless steel Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use

Flat Lid, Stainless steel, 22/28 litre baths

Stainless steel construction with wipe clean surfaces. These LD4 Lids provide insulation and consistent water bath performance, reduce energy consumption and running costs. In use they reduce airborne particles contaminating the water. Fitted with insulated lifting handle for convenience.

Polypropylene Spheres

This blanket of hollow spheres is ideal for open tanks of water. Reduces thermal losses - Savings of up to 75% can be achieved with a single layer - Increase energy saving & reducing costs. A single layer of spheres covers 91% of the liquid surface trapping air in the gaps which adds to the thermal insulation properties. Reduces steaming - vapour losses reduced by 90%. Reduce vapours & splashing. No impedance to workload.

Push fit and lock insulated hose 1m length x 6mm dia.

Flexible polyurethane tubing for connecting to inlet and outlet ports on Clifton Circulating Water baths.

Push fit and lock insulated hose 2m length x 6mm dia.

Flexible polyurethane tubing for connecting to inlet and outlet ports on Clifton Circulating Water baths.

Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Lab Bath 4590 Heat Transfer Fluid

Heat transfer fluid working temperature range -15° to +90°C, provides complete protection from freezing, corrosion and algal growth which can wear and damage pumps. Non-Toxic, Non-flammable, Environmentally safe and good heat transfer properties.

Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Raised Shelf to suit 22, 28 and 38 Litre Baths

Simple solution for placing shallow vessels in a stirred bath. Manufactured from stainless steel. The raised shelf is perforated to allow free circulation of water. Can be easily removed and cleaned.

Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Immersion Dip Cooler [ambient to -20°C]

Designed to be used in conjunction with a Clifton® Stirred or Circulating water baths. The immersion coil fits into the rear access hole behind the Thermostirrer without sacrificing the working area. The immersion cooler runs continuously providing counter cooling with bath providing temperature control from ambient to -20°C.

Immersion Dip Cooler (ambient to -20°C)

Designed to be used in conjunction with a Clifton® Stirred or Circulating water baths. The immersion coil fits into the rear access hole behind the Thermostirrer without sacrificing the working area. The immersion cooler runs continuously providing counter cooling with bath providing temperature control from ambient to -20°C. This model is the more powerful refrigeration Immersion Cooler makes it particularly beneficial for larger volume water baths.

Cooling Coil - water feed for background cooling

The Cooling Coil immerses into Clifton® Stirred or Circulating water bath, behind the Stirrer, without affecting bath working area. When connected to a cold water supply it provides counter cooling depending on tap water temperature and flow rate.

Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 50 Holes x 32mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 32mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Lab Bath 4590 Heat Transfer Fluid

Heat transfer fluid working temperature range -15° to +90°C, provides complete protection from freezing, corrosion and algal growth which can wear and damage pumps. Non-Toxic, Non-flammable, Environmentally safe and good heat transfer properties.

Calibration Record

Where equipment requires a Calibration record please order when buying equipment from Clifton® range.

Stainless Steel Hinged Gable Lid to suit 22 Litre Baths

1. The Gable lid has been designed allowing full use of whole width of a Clifton water bath with the lowest height of the gable being 45mm above the bath. This unique feature means test tube racks or flasks can be placed across the whole width of the bath without fouling the lid maximising the bath working area.

2. Designed with customer in mind ensuring where condensation accumulates in use there are no drip points which could spoil work in open flasks in your Clifton water bath.

3. Where an accessory TC-1 Thermometer is used the temperature can be read from the thermometer with the lid in place.

4. Lid fits into the tank ensuring all condensation runs back into the bath and not down the side onto your bench top.

5. The hinged lid has the added advantage where bench space is limited, the lid hinges back to the vertical position to access the bath where as a conventional lid requires lifting off the bath and placing on your bench top.

6. With continuous sampling work a conventional lid has to be removed frequently to access samples/work this hinged lid is designed with this in mind.

7. The Lid hinges back to just over vertical position as in image above.

8. Using the 'Side lifting handle' minimises the risk of hot steam rising from bath reaching your hand in use.

Thermometer Clip Complete With Bent Stem Spirit Filled Thermometer

Used as a reference to measure actual water temperature of the water bath. Thermometer range 0° to 100°C graduated in 2°C divisions.

Draining Syphon

Allows the easy and quick emptying of water baths, immerse into water bath, squeeze the bellow and point the outlet to a bucket or sink.