Internal: 242w x 300d x 200h mm
Perforated trolley size: 175w x 270d mm
Maximum water level: 120mm above perforated trolley
Minimum water level: 50mm above perforated trolley
Packed: 45 x 41 x 32mm
Accessory clips and racks can be mounted onto the perforated tray which fits onto the reciprocating stainless steel trolley. Flasks and test-tube racks can easily be loaded and unloaded by lifting out the complete shelf. The trolley can also easily be removed for cleaning. The perforated tray is supplied as standard.
Heaters and temperature sensor are concealed under the tank and provide a clutter free working area which is easy to wipe clean. The heating footprint covers the underside of the tank and with a low mass provides rapid energy transfer, resulting in quicker heat up times and a reduction in energy consumption and improved temperature uniformity.
The shaking system is quiet in use and by removing the trolley and replacing the perforated tray, it can be used as a standard laboratory bath.
The shaker trolley is stable in use and the removable perforated shelf makes loading and unloading easy, unlike other traditional shaker baths where the whole shaker carriage has to be removed.
Clifton Shaker baths features a useful stainless steel recessed tray for standing flasks on prior to and after immersion.
Comprising of a high quality corrosion resistant stainless steel tank, with a bright clean finish, housed in a durable paint finished outer case which has good chemical resistance. Painted surfaces feature anti-bacterial finish which is a hygienic coating and actively inhibits bacterial growth.
Easy to use controls, utilizing touch keypads for setting temperature values.
Features auto setting temperature alarm protecting your work at set temperature.
Every unit undergoes a factory calibration at two temperatures for validation.
Shaking speed control is by analogue dial pointer graduated in 100rpm divisions from 0 - 380rpm. Fixed stoke length 20mm.
The under/over temperature alarm is automatically set 4°C above and 4°C below set temperature. When in alarm condition the indicator illuminates and the actual bath temperature is shown. If bath is over temperature heating is switched off. Once liquid temperature has fallen or risen above/below the alarm setting, the indicator clears and actual bath temperature is shown and the control resumes.
- 12 mins
- 25 mins
- 59 mins
Covering the bath with a lid reduces energy consumption and running costs.
0.34kWh @ 60°C - lid fitted
For water temperatures above 60°C we recommend that an accessory lid or layer of spheres are used for optimum performance. This will reduce evaporation and a lid will keep the samples and water free from contamination. Optimum performance saves energy by reducing electricity consumption and running costs.
2. Shaking Clifton water bath designed for immersion of flasks, bottles and racks in a highly stable temperature environment throughout the water bath.
3. The trolley can be easily removed and cleaned.
4. Quiet running shaker mechanism and drive motor.
5. Bold temperature control panel ensuring set and actual water temperature can be easily seen.
6. Three-year warranty and comprehensive customer support.
7. Before leaving our factory each water bath has a unique serial number, electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.
8. To verify the performance of the temperature control system every unit undergoes a factory calibration adjusting control to known traceable values.
9. The control panel and painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfections. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the paint finish.
Stainless Steel Gable Lid to fit 8 and 10 Litre Unstirred and Shaking Water Baths
Clifton® Stainless steel Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use
Hinged Gable Lid to suit 8 and 10 Litre Unstirred and Shaking Water Baths
Using conventional lift off lids when removed from a water bath, condensation runs all over your bench top, a mess to clean up. Where do you put the lid once removed?
Hinged lids have a number of benefits in use over lift off lids. They simply hinge open 90° and stay open and any condensation collects in the lid, samples/work can be easily removed or placed in water bath. Close the lid and all the collected condensation runs into rear of the water bath. No mess. The hinge lid can be removed easily and quickly for cleaning or access.
Lift Off Gable Lid to suit 8 and 10 Litre Unstirred and Shaking Water baths
Clifton® clear Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use
Polypropylene Spheres
This blanket of hollow spheres is ideal for open tanks of water. Reduces thermal losses - Savings of up to 75% can be achieved with a single layer - Increase energy saving & reducing costs. A single layer of spheres covers 91% of the liquid surface trapping air in the gaps which adds to the thermal insulation properties. Reduces steaming - vapour losses reduced by 90%. Reduce vapours & splashing. No impedance to workload.
25ml Flask Clip
For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D, NE5-28 and NE5-28DT) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.
Easy to assemble and remove Flask Clips from Perforated tray.
Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.
50ml Flask Clip
For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D, NE5-28 and NE5-28DT) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.
Easy to assemble and remove Flask Clips from Perforated tray.
Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.
100ml Flask Clip
For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D , NE5-28 and NE5-28DT) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.
Easy to assemble and remove Flask Clips from Perforated tray.
Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.
250ml Flask Clip
For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D, NE5-28 and NE5-28DT) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.
Easy to assemble and remove Flask Clips from Perforated tray.
Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.
500ml Flask Clip
For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D, NE5-28 and NE5-28DT) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.
Easy to assemble and remove Flask Clips from Perforated tray.
Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.
1000ml Flask Clip
For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D, NE5-28 and NE5-28DT) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.
Easy to assemble and remove Flask Clips from Perforated tray.
Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.
2000ml Flask Clip
For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D, NE5-28 and NE5-28DT) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.
Easy to assemble and remove Flask Clips from Perforated tray.
Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.
Stainless Steel Perforated Tray - 10 litre shaking water baths
Perforated tray provides a platform for Flask Clips and can be autoclaved.
Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Draining Syphon
Allows the easy and quick emptying of water baths, immerse into water bath, squeeze the bellow and point the outlet to a bucket or sink.
Calibration Record
Factory Calibration record must be ordered with equipment.
Internal: 500w x 298d x 200h mm
Perforated shelf/trolley size: 376w x 276d mm
Maximum water level: 120mm above perforated shelf/trolley
Minimum water level: 50mm above perforated shelf/trolley
Packed: 80 x 43 x 33 cm
Accessory clips and racks can be mounted onto the perforated tray which fits onto the reciprocating stainless steel trolley. Flasks and test-tube racks can easily be loaded and unloaded by lifting out the complete shelf. The trolley can also easily be removed for cleaning. The perforated tray is supplied as standard.
Heaters and temperature sensor are concealed under the tank and provide a clutter free working area which is easy to wipe clean. The heating footprint covers the underside of the tank and with a low mass provides rapid energy transfer, resulting in quicker heat up times and a reduction in energy consumption and improved temperature uniformity.
The shaking system is quiet in use and by removing the trolley and replacing the perforated tray, it can be used as a standard laboratory bath.
The shaker trolley is stable in use and the removable perforated shelf makes loading and unloading easy, unlike other traditional shaker baths where the whole shaker carriage has to be removed.
Clifton Shaker baths features a useful stainless steel recessed tray for standing flasks on prior to and after immersion.
Comprising of a high quality corrosion resistant stainless steel tank, with a bright clean finish, housed in a durable paint finished outer case which has good chemical resistance. Painted surfaces feature anti-bacterial finish which is a hygienic coating and actively inhibits bacterial growth.
Easy to use controls, utilizing touch keypads for setting temperature values.
Features auto setting temperature alarm protecting your work at set temperature.
Every unit undergoes a factory calibration at two temperatures for validation.
Shaking speed control is by analogue dial pointer graduated in 100rpm divisions from 0 - 380rpm. Stroke length is variable up to 40mm. Opening the side access port allows stroke length to be varied.
The under/over temperature alarm is automatically set 4°C above and 4°C below set temperature. When in alarm condition the indicator illuminates and the actual bath temperature is shown. If bath is over temperature heating is switched off. Once liquid temperature has fallen or risen above/below the alarm setting, the indicator clears and actual bath temperature is shown and the control resumes.
- 25 mins
- 80 mins
- 150 mins
Covering the bath with a lid reduces energy consumption and running costs.
0.55kWh @ 60°C - lid fitted
For water temperatures above 60°C we recommend that an accessory lid or layer of spheres are used for optimum performance. This will reduce evaporation and a lid will keep the samples and water free from contamination. Optimum performance saves energy by reducing electricity consumption and running costs.
2. Shaking Clifton water bath designed for immersion of flasks, bottles and racks in a highly stable temperature environment throughout the water bath.
3. The trolley and flask trays can be easily removed for cleaning.
4. Quiet running shaker mechanism and drive motor.
5. Bold temperature control panel ensuring set and actual water temperature can be easily seen.
6. Three-year warranty and comprehensive customer support.
7. Before leaving our factory each water bath has a unique serial number, electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.
8. To verify the performance of the temperature control system every unit undergoes a factory calibration adjusting control to known traceable values.
9. The control panel and painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfections. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the paint finish.
Stainless Steel Gable Lid to fit 22 and 28 Litre Unstirred and Shaking Water Baths
Clifton® Stainless steel Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use
Stainless Steel Hinged Gable Lid to fit 22 and 28 Litre Unstirred and Shaking Water Baths
Clifton® Stainless steel hinged Gable Lids reduces evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile design allows extended use of the bath, right into the edges of the tank. No drip points and condensate returns back into the bath.
Hinged lids have a number of benefits in use over lift off lids, these simply hinge open, any condensation collects in the lid, samples can be easily removed or placed in water bath. Close the lid and all the collected condensation runs into rear of the water bath. No mess.
Hinged Gable Lid to suit 22 and 28 Litre Unstirred and Shaking Water Baths
Using conventional lift off lids when removed from a water bath, condensation runs all over your bench top, a mess to clean up. Where do you put the lid once removed?
Hinged lids have a number of benefits in use over lift off lids. They simply hinge open 90° and stay open and any condensation collects in the lid, samples/work can be easily removed or placed in water bath. Close the lid and all the collected condensation runs into rear of the water bath. No mess. The hinge lid can be removed easily and quickly for cleaning or access.
Lift Off Gable Lid to suit 9, 22 and 28 Litre Unstirred and Shaking Water Baths
Clifton® clear Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use
Polypropylene Spheres
This blanket of hollow spheres is ideal for open tanks of water. Reduces thermal losses - Savings of up to 75% can be achieved with a single layer - Increase energy saving & reducing costs. A single layer of spheres covers 91% of the liquid surface trapping air in the gaps which adds to the thermal insulation properties. Reduces steaming - vapour losses reduced by 90%. Reduce vapours & splashing. No impedance to workload.
39 x 25ml Flask Clip Tray
A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.
The NE5-28, NE5-28D and NE5-28DT are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.
32 x 50ml Flask Clip Tray
A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.
The NE5-28, NE5-28D and NE5-28DT are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.
18 x 100ml Flask Clip Tray
A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.
The NE5-28, NE5-28D and NE5-28DT are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.
12 x 250ml Flask Clip Tray
A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.
The NE5-28, NE5-28D and NE5-28DT are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.
8 x 500ml Flask Clip Tray
A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.
The NE5-28, NE5-28D and NE5-28DT are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.
5 x 1000ml Flask Clip Tray
A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.
The NE5-28, NE5-28D and NE5-28DT are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.
2 x 2000ml Flask Clip Tray
A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.
The NE5-28, NE5-28D and NE5-28DT are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.
Stainless Steel Universal Spring Tray to fit 28 Litre Bath
Universal Spring Clip Tray a multi-spring tray for accommodating a variety of flasks and bottle types, even different sizes. Featuring a criss cross pattern of springs flasks and bottles can be easily inserted and removed.
The NE5-28, NE5-28D and NE5-28DT are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.
Stainless Steel Test Tube Rack Tray to fit 28 Litre Bath
For the NE5-28, NE5-28D and NE5-28DT a Test tube rack Tray with side clips allows up to 4 test tube racks to be fitted. The tray simply drops onto the reciprocating trolley and locates snugly.
25ml Flask Clip
For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D, NE5-28 and NE5-28DT) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.
Easy to assemble and remove Flask Clips from Perforated tray.
Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.
50ml Flask Clip
For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D, NE5-28 and NE5-28DT) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.
Easy to assemble and remove Flask Clips from Perforated tray.
Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.
100ml Flask Clip
For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D , NE5-28 and NE5-28DT) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.
Easy to assemble and remove Flask Clips from Perforated tray.
Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.
250ml Flask Clip
For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D, NE5-28 and NE5-28DT) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.
Easy to assemble and remove Flask Clips from Perforated tray.
Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.
500ml Flask Clip
For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D, NE5-28 and NE5-28DT) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.
Easy to assemble and remove Flask Clips from Perforated tray.
Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.
1000ml Flask Clip
For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D, NE5-28 and NE5-28DT) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.
Easy to assemble and remove Flask Clips from Perforated tray.
Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.
2000ml Flask Clip
For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D, NE5-28 and NE5-28DT) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.
Easy to assemble and remove Flask Clips from Perforated tray.
Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.
Stainless Steel Perforated Tray - 28 litre shaking water baths
Perforated tray provides a platform for accessories such as Flask Clips and Test tube racks. The Tray can be autoclaved.
Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Drain Tap - for Water baths with serial numbers upto 75100
1. Providing a gated on/off valve to empty fluids conveniently from the bath.
2. Nozzle supplied with tap for laboratory tubing.
Drain Tap - for Water baths with serial numbers greater than 75100
1. Providing a gated on/off valve to empty fluids conveniently from the bath.
2. Nozzle supplied with tap for laboratory tubing.
Calibration Record
Factory Calibration record must be ordered with equipment.
Internal: 500w x 298d x 200h mm
Perforated shelf/trolley size: 376w x 276d mm
Maximum water level: 120mm above perforated shelf/trolley
Minimum water level: 50mmabove perforated shelf/trolley
Packed: 80 x 43 x 33 cm
Accessory clips and racks can be mounted onto the perforated tray which fits onto the reciprocating stainless steel trolley. Flasks and test-tube racks can easily be loaded and unloaded by lifting out the complete shelf. The trolley can also easily be removed for cleaning. The perforated tray is supplied as standard.
Heaters and temperature sensor are concealed under the tank and provide a clutter free working area which is easy to wipe clean. The heating footprint covers the underside of the tank and with a low mass provides rapid energy transfer, resulting in quicker heat up times and a reduction in energy consumption and improved temperature uniformity.
The shaking system is quiet in use and by removing the trolley and replacing the perforated tray, it can be used as a standard laboratory bath.
The shaker trolley is stable in use and the removable perforated shelf makes loading and unloading easy, unlike other traditional shaker baths where the whole shaker carriage has to be removed.
Clifton Shaker baths features a useful stainless steel recessed tray for standing flasks on prior to and after immersion.
Comprising of a high quality corrosion resistant stainless steel tank, with a bright clean finish, housed in a durable paint finished outer case which has good chemical resistance. Painted surfaces feature anti-bacterial finish which is a hygienic coating and actively inhibits bacterial growth.
Easy to use controls, utilizing touch keypads for setting temperature and time values.
Features auto setting temperature alarm protecting your work at set temperature.
Every unit undergoes a factory calibration at two temperatures for validation.
Shaking speed control is by analogue dial pointer graduated in 100rpm divisions from 0 - 380rpm. Stroke length is variable up to 40mm. Opening the side access port allows stroke length to be varied.
The under/over temperature alarm is automatically set 4°C above and 4°C below set temperature heating is automatically switched off, control resumes at set temperature.
- 25 mins
- 80 mins
- 150 mins
Covering the bath with a lid reduces energy consumption and running costs.
0.55kWh @ 60°C - lid fitted
For water temperatures above 60°C we recommend that an accessory lid or layer of spheres are used for optimum performance. This will reduce evaporation and a lid will keep the samples and water free from contamination. Optimum performance saves energy by reducing electricity consumption and running costs.
2. Shaking Clifton water bath designed for immersion of flasks, bottles and racks in a highly stable temperature environment throughout the water bath.
3. The trolley and flask trays can be easily removed for cleaning.
4. Quiet running shaker mechanism and drive motor.
5. Bold temperature control panel ensuring set and actual water temperature can be easily seen.
6. Three-year warranty and comprehensive customer support.
7. Before leaving our factory each water bath has a unique serial number, electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.
8. To verify the performance of the temperature control system every unit undergoes a factory calibration adjusting control to known traceable values.
9. The control panel and painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfections. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the paint finish.
Stainless Steel Gable Lid to fit 22 and 28 Litre Unstirred and Shaking Water Baths
Clifton® Stainless steel Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use
Stainless Steel Hinged Gable Lid to fit 22 and 28 Litre Unstirred and Shaking Water Baths
Clifton® Stainless steel hinged Gable Lids reduces evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile design allows extended use of the bath, right into the edges of the tank. No drip points and condensate returns back into the bath.
Hinged lids have a number of benefits in use over lift off lids, these simply hinge open, any condensation collects in the lid, samples can be easily removed or placed in water bath. Close the lid and all the collected condensation runs into rear of the water bath. No mess.
Hinged Gable Lid to suit 22 and 28 Litre Unstirred and Shaking Water Baths
Using conventional lift off lids when removed from a water bath, condensation runs all over your bench top, a mess to clean up. Where do you put the lid once removed?
Hinged lids have a number of benefits in use over lift off lids. They simply hinge open 90° and stay open and any condensation collects in the lid, samples/work can be easily removed or placed in water bath. Close the lid and all the collected condensation runs into rear of the water bath. No mess. The hinge lid can be removed easily and quickly for cleaning or access.
Lift Off Gable Lid to suit 9, 22 and 28 Litre Unstirred and Shaking Water Baths
Clifton® clear Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use
Polypropylene Spheres
This blanket of hollow spheres is ideal for open tanks of water. Reduces thermal losses - Savings of up to 75% can be achieved with a single layer - Increase energy saving & reducing costs. A single layer of spheres covers 91% of the liquid surface trapping air in the gaps which adds to the thermal insulation properties. Reduces steaming - vapour losses reduced by 90%. Reduce vapours & splashing. No impedance to workload.
39 x 25ml Flask Clip Tray
A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.
The NE5-28, NE5-28D and NE5-28DT are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.
32 x 50ml Flask Clip Tray
A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.
The NE5-28, NE5-28D and NE5-28DT are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.
18 x 100ml Flask Clip Tray
A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.
The NE5-28, NE5-28D and NE5-28DT are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.
12 x 250ml Flask Clip Tray
A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.
The NE5-28, NE5-28D and NE5-28DT are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.
8 x 500ml Flask Clip Tray
A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.
The NE5-28, NE5-28D and NE5-28DT are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.
5 x 1000ml Flask Clip Tray
A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.
The NE5-28, NE5-28D and NE5-28DT are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.
2 x 2000ml Flask Clip Tray
A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.
The NE5-28, NE5-28D and NE5-28DT are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.
Stainless Steel Universal Spring Tray to fit 28 Litre Bath
Universal Spring Clip Tray a multi-spring tray for accommodating a variety of flasks and bottle types, even different sizes. Featuring a criss cross pattern of springs flasks and bottles can be easily inserted and removed.
The NE5-28, NE5-28D and NE5-28DT are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.
Stainless Steel Test Tube Rack Tray to fit 28 Litre Bath
For the NE5-28, NE5-28D and NE5-28DT a Test tube rack Tray with side clips allows up to 4 test tube racks to be fitted. The tray simply drops onto the reciprocating trolley and locates snugly.
25ml Flask Clip
For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D, NE5-28 and NE5-28DT) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.
Easy to assemble and remove Flask Clips from Perforated tray.
Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.
50ml Flask Clip
For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D, NE5-28 and NE5-28DT) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.
Easy to assemble and remove Flask Clips from Perforated tray.
Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.
100ml Flask Clip
For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D , NE5-28 and NE5-28DT) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.
Easy to assemble and remove Flask Clips from Perforated tray.
Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.
250ml Flask Clip
For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D, NE5-28 and NE5-28DT) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.
Easy to assemble and remove Flask Clips from Perforated tray.
Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.
500ml Flask Clip
For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D, NE5-28 and NE5-28DT) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.
Easy to assemble and remove Flask Clips from Perforated tray.
Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.
1000ml Flask Clip
For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D, NE5-28 and NE5-28DT) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.
Easy to assemble and remove Flask Clips from Perforated tray.
Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.
2000ml Flask Clip
For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D, NE5-28 and NE5-28DT) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.
Easy to assemble and remove Flask Clips from Perforated tray.
Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.
Stainless Steel Perforated Tray - 28 litre shaking water baths
Perforated tray provides a platform for accessories such as Flask Clips and Test tube racks. The Tray can be autoclaved.
Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Drain Tap - for Water baths with serial numbers greater than 75100
1. Providing a gated on/off valve to empty fluids conveniently from the bath.
2. Nozzle supplied with tap for laboratory tubing.
Drain Tap - for Water baths with serial numbers upto 75100
1. Providing a gated on/off valve to empty fluids conveniently from the bath.
2. Nozzle supplied with tap for laboratory tubing.
Calibration Record
Factory Calibration record must be ordered with equipment.
Internal: 500w x 298d x 200h mm
Perforated shelf/trolley size: 376w x 276d mm
Maximum water level: 120mm above perforated shelf/trolley
Minimum water level: 50mm above perforated shelf/trolley
Packed: 80 x 43 x 33 cm
Accessory Clips and Racks can be mounted onto the perforated shelf which fits onto reciprocating stainless steel trolley. Flasks and test-tube racks can easily be loaded and unloaded, lifting out the complete shelf. The trolley can also easily be removed for cleaning. The perforated tray is supplied as standard.
Shaking system is quiet in use and by removing the trolley and replacing with the perforated tray it can be used as a standard laboratory bath.
The shaker trolley is stable in use, with a removable perforated shelf, unlike many traditional shaker baths where the whole shaker carriage has to be removed for loading and unloading. Clifton Shaker baths just require the perforated shelf, accessory clips and any installed glassware or consumables, to be removed making it lighter and easier to handle.
Uniquely Clifton Shaker baths features a useful stainless steel recessed tray for standing flasks on prior to and after immersion.
Comprising of a high quality corrosion resistant stainless steel tank, with a bright clean finish housed in a durable paint finished outer case. Painted surfaces feature anti-bacterial finish, hygienic coating which actively inhibits bacterial growth, with good chemical resistance.
Heaters are concealed under the tank providing a clutter free working area easy to wipe clean. The heating footprint covers underside base of the tank, its low mass provides rapid energy transfer; quicker heat up times and a reduction in energy consumption with improved temperature uniformity.
Thermal cut out fitted in the heater. Bath fitted with non-slip rubber feet.
- 10 mins
- 15 mins
- 25 mins
- 40 mins
Covering the bath with a lid reduces energy consumption and running costs.
0.55kWh @ 60°C - lid fitted
The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and measured consumption at set point. Please remember that the energy consumption may vary due to factors such as its location, ventilation, ambient temperatures and loading.
2. Shaking Clifton water bath designed for immersion of flasks, bottles and racks in a highly stable temperature environment throughout the water bath.
3. The trolley and flask trays can be easily removed for cleaning.
4. Quiet running shaker mechanism and drive motor.
5. Temperature is set by analogue dial with a graduated scale.
6. Three-year warranty and comprehensive customer support.
7. Before leaving our factory each water bath has a unique serial number, electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.
8. To verify the performance of the temperature control system every unit undergoes a factory calibration adjusting control to known traceable values.
9. The control panel and painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfections. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the paint finish.
Stainless Steel Gable Lid to fit 22 and 28 Litre Unstirred and Shaking Water Baths
Clifton® Stainless steel Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use
Stainless Steel Hinged Gable Lid to fit 22 and 28 Litre Unstirred and Shaking Water Baths
Clifton® Stainless steel hinged Gable Lids reduces evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile design allows extended use of the bath, right into the edges of the tank. No drip points and condensate returns back into the bath.
Hinged lids have a number of benefits in use over lift off lids, these simply hinge open, any condensation collects in the lid, samples can be easily removed or placed in water bath. Close the lid and all the collected condensation runs into rear of the water bath. No mess.
Hinged Gable Lid to suit 22 and 28 Litre Unstirred and Shaking Water Baths
Using conventional lift off lids when removed from a water bath, condensation runs all over your bench top, a mess to clean up. Where do you put the lid once removed?
Hinged lids have a number of benefits in use over lift off lids. They simply hinge open 90° and stay open and any condensation collects in the lid, samples/work can be easily removed or placed in water bath. Close the lid and all the collected condensation runs into rear of the water bath. No mess. The hinge lid can be removed easily and quickly for cleaning or access.
Lift Off Gable Lid to suit 9, 22 and 28 Litre Unstirred and Shaking Water Baths
Clifton® clear Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use
Polypropylene Spheres
This blanket of hollow spheres is ideal for open tanks of water. Reduces thermal losses - Savings of up to 75% can be achieved with a single layer - Increase energy saving & reducing costs. A single layer of spheres covers 91% of the liquid surface trapping air in the gaps which adds to the thermal insulation properties. Reduces steaming - vapour losses reduced by 90%. Reduce vapours & splashing. No impedance to workload.
39 x 25ml Flask Clip Tray
A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.
The NE5-28, NE5-28D and NE5-28DT are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.
32 x 50ml Flask Clip Tray
A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.
The NE5-28, NE5-28D and NE5-28DT are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.
18 x 100ml Flask Clip Tray
A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.
The NE5-28, NE5-28D and NE5-28DT are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.
12 x 250ml Flask Clip Tray
A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.
The NE5-28, NE5-28D and NE5-28DT are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.
8 x 500ml Flask Clip Tray
A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.
The NE5-28, NE5-28D and NE5-28DT are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.
5 x 1000ml Flask Clip Tray
A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.
The NE5-28, NE5-28D and NE5-28DT are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.
2 x 2000ml Flask Clip Tray
A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.
The NE5-28, NE5-28D and NE5-28DT are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.
Stainless Steel Universal Spring Tray to fit 28 Litre Bath
Universal Spring Clip Tray a multi-spring tray for accommodating a variety of flasks and bottle types, even different sizes. Featuring a criss cross pattern of springs flasks and bottles can be easily inserted and removed.
The NE5-28, NE5-28D and NE5-28DT are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.
Stainless Steel Test Tube Rack Tray to fit 28 Litre Bath
For the NE5-28, NE5-28D and NE5-28DT a Test tube rack Tray with side clips allows up to 4 test tube racks to be fitted. The tray simply drops onto the reciprocating trolley and locates snugly.
25ml Flask Clip
For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D, NE5-28 and NE5-28DT) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.
Easy to assemble and remove Flask Clips from Perforated tray.
Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.
50ml Flask Clip
For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D, NE5-28 and NE5-28DT) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.
Easy to assemble and remove Flask Clips from Perforated tray.
Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.
100ml Flask Clip
For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D , NE5-28 and NE5-28DT) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.
Easy to assemble and remove Flask Clips from Perforated tray.
Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.
250ml Flask Clip
For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D, NE5-28 and NE5-28DT) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.
Easy to assemble and remove Flask Clips from Perforated tray.
Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.
500ml Flask Clip
For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D, NE5-28 and NE5-28DT) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.
Easy to assemble and remove Flask Clips from Perforated tray.
Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.
1000ml Flask Clip
For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D, NE5-28 and NE5-28DT) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.
Easy to assemble and remove Flask Clips from Perforated tray.
Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.
2000ml Flask Clip
For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D, NE5-28 and NE5-28DT) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.
Easy to assemble and remove Flask Clips from Perforated tray.
Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.
Stainless Steel Perforated Tray - 28 litre shaking water baths
Perforated tray provides a platform for accessories such as Flask Clips and Test tube racks. The Tray can be autoclaved.
Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter
Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.
Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
Drain Tap - for Water baths with serial numbers upto 75100
1. Providing a gated on/off valve to empty fluids conveniently from the bath.
2. Nozzle supplied with tap for laboratory tubing.
Drain Tap - for Water baths with serial numbers greater than 75100
1. Providing a gated on/off valve to empty fluids conveniently from the bath.
2. Nozzle supplied with tap for laboratory tubing.
Calibration Record
Factory Calibration record must be ordered with equipment.