Heated Digital

DU-4

4 Litre Heated Digital Ultrasonic Bath

« Return to Ultrasonic Baths

Dimensions
External: 332w x 185d x 290h mm
Internal: 300w x 150d x 150h mm
Basket: 228w x 107d x 110h mm Accessory basket, internal size.
Water level: Maximum 130mm
Packed: 38 x 23 x 29cm
Capacity
Nominal Tank Capacity: 4 Litres
Temperature Range
ambient +5°C to 69°C
Temperature Display
Digital LED, increments 1°C
Temperature alarm
Over temperature alarm is automatically set 10˚C above.
Heater Power (220-240V)
200W
Timer
“Run back timer”, variable [hh:mm], indicator and "end" message. Minimum time setting 1 minute, recommended maximum setting 30 minutes. This Ultrasonic bath is designed for intermittent use only, no permanent on setting.
Ultrasonics effective output
150W
Ultrsonics peak power
280W
Ultrasonics operating frequency
30-40kHz
Noise level
< 65dBa, with accessory lid fitted.
Voltage
230V
Packed Weight
5.1 kg
Product Code
DU-4
Description
These heated ultrasonic baths are suitable for sonochemistry, degassing and sample dissolution and cleaning of delicate or fragile components/glassware especially where there may be a risk of breakage as a result of manual cleaning. The addition of heaters on this range ensures that optimum operating temperature for maximum ultrasonic efficiency is reached rapidly.

Using high performance piezoelectric disc transducers to ensure consistent ultrasonic activity throughout the tank liquid ideal for laboratory routines. The activity is called cavitation - this is created by pressure waves, which causes bubbles to form and collapse.

Comprising of a high quality corrosion resistant stainless steel tank, with a bright clean finish housed in a durable paint finished outer case. Painted surfaces feature anti-bacterial finish with good chemical resistance. Fitted with side lifting handles for ease of transportation.

Heaters, transducers and temperature sensor concealed under the tank providing a clutter free working area easy to wipe clean.

Wipe clean controls feature bold LED display of actual temperature, adjusting temperature and time and activating sonics.

When a low liquid level is detected a “FiLL” message automatically appears, heating and ultrasonics are suspended. Over and under temperature alarms automatically protect work in the water bath, providing heater cut off, visual message and indicator.

Baths are pre-calibrated at two seperate temperatures for consistent accuracy.

Please note - This ultrasonic cleaning unit has been designed for the ultrasonic treatment of items and liquids only. No alcohol or flammable related items can be used as this is very dangerous.
Controls
Featuring bold LED display of measured temperatures in real-time in increments of 1°C, time values in 1-minute increments, “end” message on completion-timed period and "FiLL" message for low liquid levels.

Easy to use splash proof controls, touch keypads for setting time and temperature values with indicators for heating, over temperature alarm and timer. Bold digital LED display.
Safety Features
Thermal cut out fitted in the heater. IP rated clear booted on/off mains switch. Bath fitted with non-slip rubber feet.

The over temperature alarm is automatically set 10˚C above set temperature. When in alarm condition an indicator illuminates with bath water temperature displayed. Once liquid temperature has fallen the alarm indicator clears.

Heat-up Times
  • 50 mins
  • 70 mins
  • 90 mins
Heating/Cooling Information
It is recommended that to achieve consistent heating, minimise evaporation and act as a dust cover, preventing contamination when ultrasonic bath is not in use, it should be covered with accessory lid.

This range is designed for intermittent use.

Do not allow items to touch base of the tank, we recommend accessory Baskets.

Power Consumption (220-240V)
300W
Warranty Period
3 Years
Features and Benefits
1. Disc transducers ensure, consistent ultrasonic activity throughout the tank liquid ideal for laboratory routines.
2. Illuminated on/off mains switch.
3. Full use can be made of the bath to provide maximum working area.
4. Totally unobstructed, stainless steel tank.
5. Concealed heater and temperature sensors.
6. Bench top footprint.
7. Fitted with non-slip rubber feet for safety.
8. A 304 spec stainless steel tank gives good resistance to many substances and a clean appearance throughout its working life.
9. Built to latest safety standards and supplied with comprehensive operating instructions and Three-year warranty.
10. A range of accessories available.
11. Easy to clean tank.
12. Each bath is uniquely identified with its own serial number recorded on our product database. Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.

Stainless Steel Wire Basket for 4 Litre Baths

Stainless steel. Baskets recommended for use with Ultrasonic baths.

Flat One Piece Stainless Steel Lid for 2 and 4 Litre Baths

Stainless steel flat lid minimizing heat loss, saving energy, and assisting to maintain bath temperature. Also when a Clifton water bath is 'not in use', with this lid fitted it prevents contamination of liquid from airbourne particles acts as a dust cover. The lid is fitted with an insulated handle.

Draining Syphon

Allows the easy and quick emptying of water baths, immerse into water bath, squeeze the bellow and point the outlet to a bucket or sink.

DU-8

8 Litre Heated Digital Ultrasonic Bath

« Return to Ultrasonic Baths

Dimensions
External: 332w x 270d x 290hmm
Internal: 300w x 240d x 150h mm
Basket: 212w x 185d x 110h mmAccessory basket, internal size
Water level: Maximum 130mm
Packed: 45 x 41 x 32 cm
Capacity
Nominal Tank Capacity: 8 Litres
Temperature Range
ambient +5°C to 69°C
Temperature Display
Digital LED, increments 1°C
Temperature alarm
Over temperature alarm is automatically set 10°C above set point
Heater Power (220-240V)
200W
Timer
“Run back timer”, variable [hh:mm], indicator and "end" message. Minimum time setting 1 minute, recommended maximum setting 30 minutes. This Ultrasonic bath is designed for intermittent use only, no permanent on setting.
Ultrasonic effective output
200W
Ultrasonic peak power
600W
Ultrasonics operating frequency
30 - 40kHz
Noise level
< 65dBa, with accessory lid fitted.
Voltage
230V
Packed Weight
7.3 kg
Product Code
DU-8
Description
These heated ultrasonic baths are suitable for sonochemistry, degassing and sample dissolution and cleaning of delicate or fragile components/glassware especially where there may be a risk of breakage as a result of manual cleaning. The addition of heaters on this range ensures that optimum operating temperature for maximum ultrasonic efficiency is reached rapidly.

Using high performance piezoelectric disc transducers to ensure consistent ultrasonic activity throughout the tank liquid ideal for laboratory routines. The activity is called cavitation - this is created by pressure waves, which causes bubbles to form and collapse.

Comprising of a high quality corrosion resistant stainless steel tank, with a bright clean finish housed in a durable paint finished outer case. Painted surfaces feature anti-bacterial finish with good chemical resistance. Fitted with side lifting handles for ease of transportation.

Heaters, transducers and temperature sensor concealed under the tank providing a clutter free working area easy to wipe clean.

Wipe clean controls feature bold LED display of actual temperature, adjusting temperature and time and activating sonics.

When a low liquid level is detected a “FiLL” message automatically appears, heating and ultrasonics are suspended. Over and under temperature alarms automatically protect work in the water bath, providing heater cut off, visual message and indicator.

Baths are pre-calibrated at two seperate temperatures for consistent accuracy.

Please note - This ultrasonic cleaning unit has been designed for the ultrasonic treatment of items and liquids only. No alcohol or flammable related items can be used as this is very dangerous.
Controls
Featuring bold LED display of measured temperatures in real-time in increments of 1°C, time values in 1-minute increments, “end” message on completion-timed period and "FiLL" message for low liquid levels.

Easy to use splash proof controls, touch keypads for setting time and temperature values with indicators for heating, over temperature alarm and timer. Bold digital LED display.
Safety Features
Thermal cut out fitted in the heater. IP rated clear booted on/off mains switch. Bath fitted with non-slip rubber feet.

The over temperature alarm is automatically set 10˚C above set temperature. When in alarm condition an indicator illuminates with bath water temperature displayed. Once liquid temperature has fallen the alarm indicator clears.
Heat-up Times
  • 50 mins
  • 80 mins
  • 110 mins
Heating/Cooling Information
It is recommended that to achieve consistent heating, minimise evaporation and act as a dust cover, preventing contamination when ultrasonic bath is not in use, it should be covered with accessory lid.

This range is designed for intermittent use.

Do not allow items to touch base of the tank, we recommend accessory Baskets.
Power Consumption (220-240V)
400W
Warranty Period
3 Years
Features and Benefits
1. Disc transducers ensure, consistent ultrasonic activity throughout the tank liquid ideal for laboratory routines.
2. Illuminated on/off mains switch.
3. Full use can be made of the bath to provide maximum working area.
4. Totally unobstructed, stainless steel tank.
5. Concealed heater and temperature sensors.
6. Bench top footprint.
7. Fitted with non-slip rubber feet for safety.
8. A 304 spec stainless steel tank gives good resistance to many substances and a clean appearance throughout its working life.
9. Built to latest safety standards and supplied with comprehensive operating instructions and Three-year warranty.
10. A range of accessories available.
11. Easy to clean tank.
12. Each bath is uniquely identified with its own serial number recorded on our product database. Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.

Stainless Steel Wire Basket for 8 Litre Baths

Stainless steel. Baskets recommended for use with Ultrasonic baths.

Flat One Piece Stainless Steel Lid for 8 Litre Baths

1. Prevents contamination of liquid from airbourne particles.

2. Saves energy when the bath is in use by reducing heat losses.

3. Insulated handle.

Draining Syphon

Allows the easy and quick emptying of water baths, immerse into water bath, squeeze the bellow and point the outlet to a bucket or sink.

DU-14

14 Litre Heated Digital Ultrasonic Bath

« Return to Ultrasonic Baths

Dimensions
External: 361w x 332d x 290h mm
Internal: 325w x 300d x 150h mm
Basket: 241w x 260d x 95h mm Accessory basket, internal size.
Water level: Maximum 130mm
Packed: 45 x 41 x 32 cm
Capacity
Nominal Tank Capacity: 14 Litres
Temperature Range
ambient +5°C to maximum 69°C
Temperature Display
Digital LED, increments 1°C
Temperature alarm
Over temperature alarm is automatically set 10˚C above.
Heater Power (220-240V)
400W
Timer
“Run back timer”, variable [hh:mm], indicator and "end" message. Minimum time setting 1 minute, recommended maximum setting 30 minutes. This Ultrasonic bath is designed for intermittent use only, no permanent on setting.
Ultrasonics effective output
200W
Ultrasonics operating frequency
30-40kHz
Noise level
< 65dBa, with accessory lid fitted.
Voltage
230V
Packed Weight
7.5 kg
Product Code
DU-14
Description
These heated ultrasonic baths are suitable for sonochemistry, degassing and sample dissolution and cleaning of delicate or fragile components/glassware especially where there may be a risk of breakage as a result of manual cleaning. The addition of heaters on this range ensures that optimum operating temperature for maximum ultrasonic efficiency is reached rapidly.

Using high performance piezoelectric disc transducers to ensure consistent ultrasonic activity throughout the tank liquid ideal for laboratory routines. The activity is called cavitation - this is created by pressure waves, which causes bubbles to form and collapse.

Comprising of a high quality corrosion resistant stainless steel tank, with a bright clean finish housed in a durable paint finished outer case. Painted surfaces feature anti-bacterial finish with good chemical resistance. Fitted with side lifting handles for ease of transportation.

Heaters, transducers and temperature sensor concealed under the tank providing a clutter free working area easy to wipe clean.

Wipe clean controls feature bold LED display of actual temperature, adjusting temperature and time and activating sonics.

When a low liquid level is detected a “FiLL” message automatically appears, heating and ultrasonics are suspended. Over and under temperature alarms automatically protect work in the water bath, providing heater cut off, visual message and indicator.

Baths are pre-calibrated at two seperate temperatures for consistent accuracy.

Please note - This ultrasonic cleaning unit has been designed for the ultrasonic treatment of items and liquids only. No alcohol or flammable related items can be used as this is very dangerous.
Controls
Featuring bold LED display of measured temperatures in real-time in increments of 1°C, time values in 1-minute increments, “end” message on completion-timed period and "FiLL" message for low liquid levels.

Easy to use splash proof controls, touch keypads for setting time and temperature values with indicators for heating, over temperature alarm and timer. Bold digital LED display.
Safety Features
Thermal cut out fitted in the heater. IP rated clear booted on/off mains switch. Bath fitted with non-slip rubber feet.

The over temperature alarm is automatically set 10˚C above set temperature. When in alarm condition an indicator illuminates with bath water temperature displayed. Once liquid temperature has fallen the alarm indicator clears.
Heat-up Times
  • 50 mins
  • 80 mins
  • 110 mins
Heating/Cooling Information
It is recommended that to achieve consistent heating, minimise evaporation and act as a dust cover, preventing contamination when ultrasonic bath is not in use, it should be covered with accessory lid.

This range is designed for intermittent use.

Do not allow items to touch base of the tank, we recommend accessory Baskets.
Power Consumption (220-240V)
600W
Warranty Period
3 Years
Features and Benefits
1. Disc transducers ensure, consistent ultrasonic activity throughout the tank liquid ideal for laboratory routines.
2. Illuminated on/off mains switch.
3. Full use can be made of the bath to provide maximum working area.
4. Totally unobstructed, stainless steel tank.
5. Concealed heater and temperature sensors.
6. Bench top footprint.
7. Fitted with non-slip rubber feet for safety.
8. A 304 spec stainless steel tank gives good resistance to many substances and a clean appearance throughout its working life.
9. Built to latest safety standards and supplied with comprehensive operating instructions and Three-year warranty.
10. A range of accessories available.
11. Easy to clean tank.
12. Each bath is uniquely identified with its own serial number recorded on our product database. Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.

Stainless Steel Wire Basket for 14 Litre Baths

Stainless steel. Baskets recommended for use with Ultrasonic baths.

Flat One Piece Stainless Steel Lid for 14 Litre Baths

Stainless steel flat lid minimizing heat loss, saving energy, and assisting to maintain bath temperature. Also when a Clifton water bath is 'not in use', with this lid fitted it prevents contamination of liquid from airbourne particles acts as a dust cover. The lid is fitted with an insulated handle.

Draining Syphon

Allows the easy and quick emptying of water baths, immerse into water bath, squeeze the bellow and point the outlet to a bucket or sink.

DU-22

22 Litre Heated Digital Ultrasonic Bath

« Return to Ultrasonic Baths

Dimensions
External: 535w x 332d x 290hmm
Internal: 500w x 300d x 150hmm
Basket: 410w x 246d x 110h mm Accessory basket, internal size.
Water level: Maximum 130mm
Packed: 620 x 410 x 370mm
Capacity
Nominal Tank Capacity: 22 Litres
Temperature Range
ambient +5°C to 69°C
Temperature Display
Display LED, increments of 1°C .
Temperature alarm
Over temperature alarm is automatically set 10˚C above.
Heater Power (220-240V)
600W
Timer
“Run back timer”, variable [hh:mm], indicator and "end" message. Minimum time setting 1 minute, recommended maximum setting 30 minutes. This Ultrasonic bath is designed for intermittent use only, no permanent on setting.
Ultrasonic effective output
300W
Ulltrasonics operating frequency
30-40kHz
Noise level
< 70dBa, with accessory lid fitted.
Drain Tap Fitted
Drain outlet 12mm bore for fast emptying in 10 minutes. An accessory tap can be fitted for convenience.
Voltage
230V
Packed Weight
11.5 kg
Product Code
DU-22
Description
These heated ultrasonic baths are suitable for sonochemistry, degassing and sample dissolution and cleaning of delicate or fragile components/glassware especially where there may be a risk of breakage as a result of manual cleaning. The addition of heaters on this range ensures that optimum operating temperature for maximum ultrasonic efficiency is reached rapidly.

Using high performance piezoelectric disc transducers to ensure consistent ultrasonic activity throughout the tank liquid ideal for laboratory routines. The activity is called cavitation - this is created by pressure waves, which causes bubbles to form and collapse.

Comprising of a high quality corrosion resistant stainless steel tank, with a bright clean finish housed in a durable paint finished outer case. Painted surfaces feature anti-bacterial finish with good chemical resistance. Fitted with side lifting handles for ease of transportation.

Heaters, transducers and temperature sensor concealed under the tank providing a clutter free working area easy to wipe clean.

Wipe clean controls feature bold LED display of actual temperature, adjusting temperature and time and activating sonics.

When a low liquid level is detected a “FiLL” message automatically appears, heating and ultrasonics are suspended. Over and under temperature alarms automatically protect work in the water bath, providing heater cut off, visual message and indicator.

Baths are pre-calibrated at two seperate temperatures for consistent accuracy.

Please note - This ultrasonic cleaning unit has been designed for the ultrasonic treatment of items and liquids only. No alcohol or flammable related items can be used as this is very dangerous.
Controls
Featuring bold LED display of measured temperatures in real-time in increments of 1°C, time values in 1-minute increments, “end” message on completion-timed period and "FiLL" message for low liquid levels. Easy to use splash proof controls, touch keypads for setting time and temperature values with indicators for heating, over temperature alarm and timer. Bold digital LED display.
Safety Features
Thermal cut out fitted in the heater. IP rated clear booted on/off mains switch. Bath fitted with non-slip rubber feet.

The over temperature alarm is automatically set 10˚C above set temperature. When in alarm condition an indicator illuminates with bath water temperature displayed. Once liquid temperature has fallen the alarm indicator clears.
Heat-up Times
  • 60 mins
  • 75 mins
  • 100 mins
Heating/Cooling Information
It is recommended that to achieve consistent heating, minimise evaporation and act as a dust cover, preventing contamination when ultrasonic bath is not in use, it should be covered with accessory lid.

This range is designed for intermittent use.

Do not allow items to touch base of the tank, we recommend accessory Baskets.
Power Consumption (220-240V)
900W
Warranty Period
3 Years
Features and Benefits
1. Disc transducers ensure, consistent ultrasonic activity throughout the tank liquid ideal for laboratory routines.
2. Illuminated on/off mains switch.
3. Full use can be made of the bath to provide maximum working area.
4. Totally unobstructed, stainless steel tank.
5. Concealed heater and temperature sensors.
6. Bench top footprint.
7. Fitted with non-slip rubber feet for safety.
8. A 304 spec stainless steel tank gives good resistance to many substances and a clean appearance throughout its working life.
9. Built to latest safety standards and supplied with comprehensive operating instructions and Three-year warranty.
10. A range of accessories available.
11. Easy to clean tank.
12. Each bath is uniquely identified with its own serial number recorded on our product database. Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.

Stainless Steel Wire Basket for 22 Litre Baths

Stainless steel. Baskets recommended for use with Ultrasonic baths.

Flat One Piece Stainless Steel Lid for 22 Litre Baths

Stainless steel flat lid minimizing heat loss, saving energy, and assisting to maintain bath temperature. Also when a Clifton water bath is 'not in use', with this lid fitted it prevents contamination of liquid from airbourne particles acts as a dust cover. The lid is fitted with an insulated handle.

Drain Tap - for Water baths with serial numbers upto 75100

1. Providing a gated on/off valve to empty fluids conveniently from the bath.

2. Nozzle supplied with tap for laboratory tubing.

Drain Tap - for Water baths with serial numbers greater than 75100

1. Providing a gated on/off valve to empty fluids conveniently from the bath.

2. Nozzle supplied with tap for laboratory tubing.