Nickel-Electro ltd.

CM-1

For rapid and efficient mixing the Cyclone is far superior to hand shaking. The Cyclone creates a vortex in the tube, which gives the highly effective mixing action.

Contamination from stirring rods and stoppers is eliminated and different samples may be subjected to the same degree of mixing, thus improving repeatability of results. Fitted with an automatic press-start operation providing instant action the moment the tube is pressed into the rubber cap. This feature is particularly useful where repetitive mixing is undertaken. Offers variable speed control, with the advantages of controlled mixing over a wide speed range 200 to 2800 rpm on a 7mm orbit. This allows for very slow gently mixing which is necessary in many applications, particularly where damage to cell structure must be avoided.

The unit may be set up for continuous running at the chosen speed or on demand by inserting the tube into the cup. The skirted rubber cup helps prevent liquid entering the casing. The cup accepts vessels up to 25mm diameter. Excellent stability is achieved as a result of a combination of weight and non-slip feet.

Motor fitted with one shot overtemprature/overcurrent safety device.

75W

3 Years

1. Accessory Stock No RSA-1/CM Retort Stand Assembly an ideal option for customers who require a permanent fixing for test tubes during long term or frequent tube mixing. In use reduces 'finger or hand' fatigue in orbital mixing and caps open tubes.

2. Proven design in widespread use.

3. Unit is weighted for stability.

1. Variable speed control, with the advantages of controlled mixing over a wide speed range up to a maximum of 2800 rpm.

2. Operates at slow speed for gentle mixing necessary in many applications where damage to cell structure is to be avoided.

3. Can be set for continuous running at the chosen speed or on demand by inserting the tube into the cup.

4. Skirted rubber cup prevents liquid entering the mixer casing.

5. Will accept vessels up to 25mm diameter.

6. Excellent stability is achieved through combination of weight and non-slip feet.

CM-2

The Cyclone+ is designed for tube, micro plate, flask and micro tube mixing using accessory platforms which can be quickly interchangeable.

• 
  
• Variable speed control, with the advantages of controlled mixing over a speed range.
• 
  
• Where accessory platforms are fitted the unit is designed to operate at lower speeds for gentle mixing reducing damage to cell structures.
• 
  
• Two modes of operation set for continuous running or press start operation suitable for use with accessory tube mixing cup.
• 
  
• Unique design accessory platforms, which can be autoclaved.
• 
  
• Offers variable speed control, with the advantages of controlled mixing over a wide speed range to a maximum of 2800 rpm for tube mixing.
• 
  
• Mixing orbit 4mm.
• 
  
• Excellent stability is achieved as a result of a combination of weight and non-slip feet.
• 
  

Motor fitted with one shot overtemprature/overcurrent safety device.

75W

3 Years

Applications and accessories.

For very slow gently mixing which is necessary in many applications needing the accessory platforms, particularly where damage to cell structure must be avoided, mixing speeds should not exceed 1000rpm.

Guide Specific Applications.

• Pre-treating Paraffin Specimens for FISH assys, Hybridization step, pre-warm the probe to room temperature, vortex and spin down.

1. Variable speed control, with the advantages of controlled mixing over a wide speed range.

2. Maximum accessory tube mixing speed up to 2800 rpm.

3. Maximum recommended accessory platform mixing speeds up to 1000 rpm.

4. Operates at slow speed for gentle mixing necessary in many applications where damage to cell structure is to be avoided.

5. Can be set for continuous running at the chosen speed or on demand.

6. Excellent stability is achieved through combination of weight and non-slip feet.

7. Low noise in use.