Bath Armor™

BA-0.5

Bath Armor™ Pack size 0.5 Litre

« Return to Bath Armor™

Packed Weight
0.5 kg
Product Code
BA-0.5
Packed Weight
0.5 kg
Description
Bath Armor™ is moisture and gas impermeable, high thermal conductivity, smooth and rounded almost fluid like and reduces your water consumption.



Blockheaters



  • One pile of Bath Armor™ filling the heating well, suits all tube sizes.

  • No more pre-drilled blocks.

  • Accepts any size and shape vessels.

  • More convenient to use.

  • Can be washed or sterilized.

  • Good thermal heat distribution.



Replaces pre-drilled blocks in your blockheaters with thermally efficient pellts that are easy to keep clean.



Reduces investment in blocks and heating well can be used for hesting any tube size or shape at the same time.



Cleaning Bath Armor™ either using a disinfectant solution and or can be autoclaved.



Filling a Walkabout Tray



  • The new Walkabout Scoop Tray is jaw-droppingly clever. It’s a quarter the size of a traditional lab bucket. Making it easy to use under the hood or in tight benchtop spaces. With its proven insulative properties, it keeps your samples and reagents at temperature after removing them from the bead bath, Incubator, Chill Bucket™ or the refrigerator.


  • The first incubator you carry around with you!


  • Keep it warm. Things happen when you take your samples, reagents, or cells out of their warm incubating environment and place them onto a cold surface. Why not keep them at temperature while you are setting up your experiment at the bench, under the hood, or while traveling between labs, or where ever you go. This is what the new Walkabout™ Scoop Tray is all about. Just scoop out some warm beads from the Bead Bath, add your samples, and go.
Sensitivity
Sensitivity in a BH-1/DIG = ±0.35°C.

Chill Bucket with Beads, Bead bag with 2 off Chilli Packs

The Chill Bucket can maintain cold temperatures 1 - 8°C for 4 or more hours with one Chill Pack. For up to 8 or more hours a second Chill Pack is recommended. The Chill Packs were frozen to -20°C in a freezer and the Beads cooled to 2°C in a refrigerator prior to placing in the bucket.

Temperature data represents actual measurement results from a single probe in centre of the bucket.

Walkabout Insulative Scoop Tray

  • Working temperature range -196°C to 93°C.
  • Durable and lightweight.
  • Lid not required.
  • Condensation Free.
  • Can be cleaned simply hand wash with mild detergent and towel dry.
  • BA-5

    Bath Armor™ replacement for water in water baths

    « Return to Water Baths Unstirred

    Pack size
    2, 4, 5 Litre water baths: 1 Pack Provides approximate 80mm depth
    8 Litre water baths: 1 Pack Provides approximate 40mm depth
    Sensitivity
    Sensitivity in a NE2-8D ±0.8°C.
    Packed Weight
    5 kg
    Product Code
    BA-5
    Description
    Bath Armor™ is moisture and gas impermeable, high thermal conductivity, smooth and rounded almost fluid like and reduces your water consumption.

    Designed for Water baths

    • No more filling topping up water baths, maintaining water level.

    • Cleaning frequency reduced.

    • No water bourne contamination.

    • Can be washed or sterilized.

    • Good thermal heat distribution.


    Replace water in your water bath with these thermally efficient pellets that are easy to keep clean. It enables you to eliminate nearly all water bath cleaning and protects your water bath from drying out.

    Saving the need for racks, floaties and bottle weights. More free time, one less duty, NEVER have to wash or refill a water bath again!

    Bath Armor™ combined with our work on providing anti-bacterial properties to touchable areas on the Clifton range, such as the painted surfaces and controls, our attention has moved to the contents of the water bath itself – “the wet area”. It is recognised a conventional water bath requires regular cleaning, all wetted surfaces need treating with a surface disinfectant along with frequent changes of water reducing the occurrence of contamination.

    Bath Armor™ aims to tackle water contamination by utilizing a dry, metallic thermal media comprised of small beads instead of water. The result is a dry bath that is far less conducive to contamination than a water-filled bath.

    Cleaning Bath Armor™ either using a disinfectant solution and or can be autoclaved.

    Chill Bucket with Beads, Bead bag with 2 off Chilli Packs

    The Chill Bucket can maintain cold temperatures 1 - 8°C for 4 or more hours with one Chill Pack. For up to 8 or more hours a second Chill Pack is recommended. The Chill Packs were frozen to -20°C in a freezer and the Beads cooled to 2°C in a refrigerator prior to placing in the bucket.

    Temperature data represents actual measurement results from a single probe in centre of the bucket.

    Walkabout Insulative Scoop Tray

  • Working temperature range -196°C to 93°C.
  • Durable and lightweight.
  • Lid not required.
  • Condensation Free.
  • Can be cleaned simply hand wash with mild detergent and towel dry.
  • BA-12

    Bath Armor™ Replacement for Water in Water Baths. Pack Size: 12 Litres

    « Return to Water Baths Unstirred

    Product Weight
    10kg
    Sensitivity
    Sensitivity in a NE2-8D ±0.8°C.
    Product Code
    BA-12
    Pack size
    8 Litre water baths: 1 Pack
    14 Litre water baths: 2 Packs
    22 Litre water baths: 2 Packs
    Description
    Bath Armor™ is moisture and gas impermeable, high thermal conductivity, smooth and rounded almost fluid like and reduces your water consumption.

    Designed for Water baths
    • No more filling topping up water baths, maintaining water level.
    • Cleaning frequency reduced.
    • No water borne contamination.
    • Can be washed or sterilized.
    • Good thermal heat distribution.
    Replace water in your water bath with these thermally efficient pellets that are easy to keep clean. It enables you to eliminate nearly all water bath cleaning and protects your water bath from drying out. Saving the need for racks, floaties and bottle weights. More free time, one less duty, NEVER have to wash or refill a water bath again! Bath Armor™ combined with our work on providing anti-bacterial properties to touchable areas on the Clifton range, such as the painted surfaces and controls, our attention has moved to the contents of the water bath itself – “the wet area”. It is recognised a conventional water bath requires regular cleaning, all wetted surfaces need treating with a surface disinfectant along with frequent changes of water reducing the occurrence of contamination. Bath Armor™ aims to tackle water contamination by utilizing a dry, metallic thermal media comprised of small beads instead of water. The result is a dry bath that is far less conducive to contamination than a water-filled bath. Cleaning Bath Armor™ either using a disinfectant solution and or can be autoclaved.

    Chill Bucket with Beads, Bead bag with 2 off Chilli Packs

    The Chill Bucket can maintain cold temperatures 1 - 8°C for 4 or more hours with one Chill Pack. For up to 8 or more hours a second Chill Pack is recommended. The Chill Packs were frozen to -20°C in a freezer and the Beads cooled to 2°C in a refrigerator prior to placing in the bucket.

    Temperature data represents actual measurement results from a single probe in centre of the bucket.

    Walkabout Insulative Scoop Tray

  • Working temperature range -196°C to 93°C.
  • Durable and lightweight.
  • Lid not required.
  • Condensation Free.
  • Can be cleaned simply hand wash with mild detergent and towel dry.