NE3DT Unstirred Digital Water Baths with Timer

NE3-4DT

4 Litre Unstirred Digital Water Bath with Hinged Clear Lid, False Base and Timers.

« Return to Water Baths Unstirred

Dimensions
External: 332w x 185d x 290h mm
Internal: 300w x 150d x 150h mm
Water level: Maximum 130mm shelf fitted working depth 115mm
Packed: 38 x 23 x 29 cm
Capacity
Nominal Tank Capacity: 4 Litres
Brimful Capacity: 6 litres
Temperature Range
Ambient +5°C - 99°C
Temperature alarm
Under/over temperature alarm is automatically set 4˚C above and 4˚C below set point.
Temperature control
PID Digital, LED display showing actual or set temperature, resolution 0.1°C
Temperature control and run back timer
Indicator and end message variable, 00:01 to 99:59 [hh:mm], activates at set temperature
Temperature control and delay start timer
Heating commences at a set time in future within 24 hours, useful for pre-conditioning water bath ready for use.
Sensitivity
±0.2°C
Uniformity
±0.1°C
Heater Power (220-240V)
400 W
Voltage
120V or 230V 50-60Hz
Packed Weight
5.5 kg
Product Code
NE3-4DT
Description
These NE3 series Clifton Water baths feature precision temperature control with an option to enable a run back or delay start timers, the latter useful for pre-conditioning water temperature before use.

Supplied with clear hinged polycarbonate lid, convenient to use, all condensate runs back into the bath in either open or closed positions. Also featured a durable gated drain tap designed to quickly empty the water bath, painted antibacterial surfaces and touch flush fitting controls, with illuminated LED display for temperature and time values.

Every water bath undergoes a factory calibration at two reference temperatures validating each bath for total confidence in use.

Each bath comes complete with a removable Clifton "low" height stainless steel perforated shelf.

Comprising of a high quality corrosion resistant stainless steel tank, with a bright clean finish housed in a durable paint finished outer case.

Heaters and temperature sensor concealed under the tank providing a clutter free working area easy to wipe clean. The heating footprint covers underside base of the tank, its low mass provides rapid energy transfer; quicker heat up times and reduce energy consumption with improved temperature uniformity.

Featuring side lifting handles for ease of transportation.
Controls
Featuring bold LED display of measured temperatures in real-time, increments of ±0.1°C, using precision PID temperature control. Timer settings variable, 00:01 to 99:59 [hh:mm]. Settings retained even after turning the unit off.

Easy to use splash proof controls, touch keypads for setting temperature values with indicators for heating, timer and over temperature alarm.

Features auto setting over and under temperature alarm protecting your work at set temperature.

Every unit undergoes a factory calibration at two temperatures for validation.
Heat-up Times
  • 13 mins
  • 28 mins
  • 87 mins
Safety Features
Thermal cut out fitted in the heater. IP rated clear booted on/off mains switch. Bath fitted with non-slip rubber feet.

The under/over temperature alarm is automatically set 4˚C above and 4˚C below set temperature. When in alarm condition the indicator illuminates and actual bath temperature is shown, if bath is over temperature heating is switched off. Once liquid temperature has fallen or risen above/below the alarm setting the indicator clears and actual bath temperature is shown, control resumes.
Energy Consumption
0.2kWh @ 37°C
0.21kWh @ 60°C - lid fitted

The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and measured consumption at set point. Please remember that the energy consumption may vary due to factors such as its location, ventilation, ambient temperatures and loading.
Warranty Period
3 Years
Features and Benefits
1.Clifton unstirred water baths are designed for immersion of flasks/bottles/racks in a highly stable temperature environment throughout the water bath. 2. The shelf in the stainless steel tank provides a stable support for flasks/bottles/racks that can be removed for cleaning. The shelf is a low height design maximizing the working height in the bath, either needing less water when compared with traditional water baths or allowing tall containers or vessels to be immersed to a greater working depth. With lower water levels comes the benefit reduced heat up times and energy saving. 3. Three-year warranty and comprehensive customer support. 4. Full use can be made of the bath to provide maximum working area. 5. Before leaving our factory each water bath has a unique serial number, electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book. 6. To verify the performance of the temperature control system every unit undergoes a factory calibration adjusting control to known traceable values. 7. Painted surfaces and control surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by many clinical and laboratory environments. These hygienic surfaces are part of a controlled approach to cleaner facilities. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfection’s. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the finishes

Stainless Steel Gable Lid to fit 2 and 4 Litre Unstirred Baths

Clifton® Stainless steel Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use

Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Wire Basket for 4 Litre Baths

Stainless steel. Baskets recommended for use with Ultrasonic baths.

Bath Armor™ replacement for water in water baths: Pack Size: 4 Litres

The unique properties of the dry media support the samples without blocks, racks, floats or weights.

The cumbersome task and frequency of emptying, cleaning and refilling is simplified and dramatically reduced, resulting in a more productive lab, more successful experiments and less lab downtime.

There is no steam or condensation which may be a nuisance in some labs.

Thermometer Clip Complete With Bent Stem Spirit Filled Thermometer

Used as a reference to measure actual water temperature of the water bath. Thermometer range 0° to 100°C graduated in 2°C divisions.

Bar Keepes Friend for cleaning water baths removing dirt and appearance of rust.

Ideal for cleaning stainless steel, in fact all metals, ceramic surfaces, laminates, tiles, plastics and glass.

Draining Syphon

Allows the easy and quick emptying of water baths, immerse into water bath, squeeze the bellow and point the outlet to a bucket or sink.

Calibration Record

Where equipment requires a Calibration record please order when buying equipment from Clifton® range.

NE3-8DT

8 Litre Unstirred Digital Water Bath with Hinged Clear Lid, False Base, Drain tap and Timers.

« Return to Water Baths Unstirred

Dimensions
External: 332w x 270d x 290h mm
Internal: 300w x 240d x 150h mm
Water level: Maximum 130mm shelf fitted working depth 115mm
Packed: 38 x 23 x 29 cm
Capacity
Nominal Tank Capacity: 8 Litres
Brimful Capacity: 10 litres
Temperature Range
Ambient +5°C - 99°C
Temperature alarm
Under/over temperature alarm is automatically set 4˚C above and 4˚C below set point.
Temperature control
PID Digital, LED display showing actual or set temperature, resolution 0.1°C
Temperature control and run back timer
Indicator and end message variable, 00:01 to 99:59 [hh:mm], activates at set temperature
Temperature control and delay start timer
Heating commences at a set time in future within 24 hours, useful for pre-conditioning water bath ready for use.
Sensitivity
±0.2°C
Uniformity
±0.1°C
Drain
Drain tap fitted, large 12mm bore for fast emptying.
Heater Power (220-240V)
800 W
Voltage
120V or 230V 50-60Hz
Packed Weight
7 kg
Product Code
NE3-8DT
Description
These NE3 series Clifton Water baths feature precision temperature control with an option to enable a run back or delay start timers, the latter useful for pre-conditioning water temperature before use.

Supplied with clear hinged polycarbonate lid, convenient to use, all condensate runs back into the bath in either open or closed positions. Also featured a durable gated drain tap designed to quickly empty the water bath, painted antibacterial surfaces and touch flush fitting controls, with illuminated LED display for temperature and time values.

Every water bath undergoes a factory calibration at two reference temperatures validating each bath for total confidence in use.

Each bath comes complete with a removable Clifton "low" height stainless steel perforated shelf.

Comprising of a high quality corrosion resistant stainless steel tank, with a bright clean finish housed in a durable paint finished outer case.

Heaters and temperature sensor concealed under the tank providing a clutter free working area easy to wipe clean. The heating footprint covers underside base of the tank, its low mass provides rapid energy transfer; quicker heat up times and reduce energy consumption with improved temperature uniformity.

Featuring side lifting handles for ease of transportation.
Controls
Featuring bold LED display of measured temperatures in real-time, increments of ±0.1°C, using precision PID temperature control. Timer settings variable, 00:01 to 99:59 [hh:mm]. Settings retained even after turning the unit off.

Easy to use splash proof controls, touch keypads for setting temperature values with indicators for heating, timer and over temperature alarm.

Features auto setting over and under temperature alarm protecting your work at set temperature.

Every unit undergoes a factory calibration at two temperatures for validation.
Heat-up Times
  • 12 mins
  • 25 mins
  • 59 mins
Safety Features
Thermal cut out fitted in the heater. IP rated clear booted on/off mains switch. Bath fitted with non-slip rubber feet.

The under/over temperature alarm is automatically set 4˚C above and 4˚C below set temperature. When in alarm condition the indicator illuminates and actual bath temperature is shown, if bath is over temperature heating is switched off. Once liquid temperature has fallen or risen above/below the alarm setting the indicator clears and actual bath temperature is shown, control resumes.
Energy Consumption
0.33kWh @ 37°C
0.34kWh @ 60°C - lid fitted

The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and measured consumption at set point. Please remember that the energy consumption may vary due to factors such as its location, ventilation, ambient temperatures and loading.
Warranty Period
3 Years
Features and Benefits
1.Clifton unstirred water baths are designed for immersion of flasks/bottles/racks in a highly stable temperature environment throughout the water bath. 2. The shelf in the stainless steel tank provides a stable support for flasks/bottles/racks that can be removed for cleaning. The shelf is a low height design maximizing the working height in the bath, either needing less water when compared with traditional water baths or allowing tall containers or vessels to be immersed to a greater working depth. With lower water levels comes the benefit reduced heat up times and energy saving. 3. Three-year warranty and comprehensive customer support. 4. Full use can be made of the bath to provide maximum working area. 5. Before leaving our factory each water bath has a unique serial number, electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book. 6. To verify the performance of the temperature control system every unit undergoes a factory calibration adjusting control to known traceable values. 7. Painted surfaces and control surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by many clinical and laboratory environments. These hygienic surfaces are part of a controlled approach to cleaner facilities. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfection’s. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the finishes

Stainless Steel Gable Lid to fit 8 and 10 Litre Unstirred and Shaking Water Baths

Clifton® Stainless steel Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use

Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Wire Basket for 8 Litre Baths

Stainless steel. Baskets recommended for use with Ultrasonic baths.

Bath Armor™ replacement for water in water baths: Pack size 12 litres

The unique properties of the dry media support the samples without blocks, racks, floats or weights.

The cumbersome task and frequency of emptying, cleaning and refilling is simplified and dramatically reduced, resulting in a more productive lab, more successful experiments and less lab downtime.

There is no steam or condensation which may be a nuisance in some labs.

Thermometer Clip Complete With Bent Stem Spirit Filled Thermometer

Used as a reference to measure actual water temperature of the water bath. Thermometer range 0° to 100°C graduated in 2°C divisions.

Bar Keepes Friend for cleaning water baths removing dirt and appearance of rust.

Ideal for cleaning stainless steel, in fact all metals, ceramic surfaces, laminates, tiles, plastics and glass.

Calibration Record

Where equipment requires a Calibration record please order when buying equipment from Clifton® range.

NE3-14DT

14 Litre Unstirred Digital Water Bath with Hinged Clear Lid, False Base, Drain tap and Timers.

« Return to Water Baths Unstirred

Dimensions
External: 361w x 332d x 290h mm
Internal: 325w x 300d x 150h mm
Water level: Maximum 130mm shelf fitted working depth 115mm
Packed: 45 x 41 x 32 cm
Capacity
Nominal Tank Capacity: 14 Litres
Temperature Range
Ambient +5°C - 99°C
Temperature alarm
Under/over temperature alarm is automatically set 4˚C above and 4˚C below set point.
Temperature control
PID Digital, LED display showing actual or set temperature, resolution 0.1°C
Temperature control and run back timer
Indicator and end message variable, 00:01 to 99:59 [hh:mm], activates at set temperature
Temperature control and delay start timer
Heating commences at a set time in future within 24 hours, useful for pre-conditioning water bath ready for use.
Sensitivity
±0.2°C
Uniformity
±0.1°C
Drain
Drain tap fitted, large 12mm bore for fast emptying.
Heater Power (220-240V)
1000 W
Voltage
120V or 230V and 50-60Hz
Packed Weight
8 kg
Product Code
NE3-14DT
Description
These NE3 series Clifton Water baths feature precision temperature control with an option to enable a run back or delay start timers, the latter useful for pre-conditioning water temperature before use.

Supplied with clear hinged polycarbonate lid, convenient to use, all condensate runs back into the bath in either open or closed positions. Also featured a durable gated drain tap designed to quickly empty the water bath, painted antibacterial surfaces and touch flush fitting controls, with illuminated LED display for temperature and time values.

Every water bath undergoes a factory calibration at two reference temperatures validating each bath for total confidence in use.

Each bath comes complete with a removable Clifton "low" height stainless steel perforated shelf.

Comprising of a high quality corrosion resistant stainless steel tank, with a bright clean finish housed in a durable paint finished outer case.

Heaters and temperature sensor concealed under the tank providing a clutter free working area easy to wipe clean. The heating footprint covers underside base of the tank, its low mass provides rapid energy transfer; quicker heat up times and reduce energy consumption with improved temperature uniformity.

Featuring side lifting handles for ease of transportation.
Controls
Featuring bold LED display of measured temperatures in real-time, increments of ±0.1°C, using precision PID temperature control. Timer settings variable, 00:01 to 99:59 [hh:mm]. Settings retained even after turning the unit off.

Easy to use splash proof controls, touch keypads for setting temperature values with indicators for heating, timer and over temperature alarm.

Features auto setting over and under temperature alarm protecting your work at set temperature.

Every unit undergoes a factory calibration at two temperatures for validation.
Heat-up Times
  • 16 mins
  • 35 mins
  • 74 mins
Safety Features
Thermal cut out fitted in the heater. IP rated clear booted on/off mains switch. Bath fitted with non-slip rubber feet.

The under/over temperature alarm is automatically set 4˚C above and 4˚C below set temperature. When in alarm condition the indicator illuminates and actual bath temperature is shown, if bath is over temperature heating is switched off. Once liquid temperature has fallen or risen above/below the alarm setting the indicator clears and actual bath temperature is shown, control resumes.
Energy Consumption
0.4kWh @ 37°C
0.35kWh @ 60°C - lid fitted

The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and measured consumption at set point. Please remember that the energy consumption may vary due to factors such as its location, ventilation, ambient temperatures and loading.
Warranty Period
3 Years
Features and Benefits
1.Clifton unstirred water baths are designed for immersion of flasks/bottles/racks in a highly stable temperature environment throughout the water bath. 2. The shelf in the stainless steel tank provides a stable support for flasks/bottles/racks that can be removed for cleaning. The shelf is a low height design maximizing the working height in the bath, either needing less water when compared with traditional water baths or allowing tall containers or vessels to be immersed to a greater working depth. With lower water levels comes the benefit reduced heat up times and energy saving. 3. Three-year warranty and comprehensive customer support. 4. Full use can be made of the bath to provide maximum working area. 5. Before leaving our factory each water bath has a unique serial number, electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book. 6. To verify the performance of the temperature control system every unit undergoes a factory calibration adjusting control to known traceable values. 7. Painted surfaces and control surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by many clinical and laboratory environments. These hygienic surfaces are part of a controlled approach to cleaner facilities. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfection’s. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the finishes

Stainless Steel Gable Lid to fit 5 and 14 Litre Unstirred Baths

Clifton® Stainless steel Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use

Stainless Steel Hinged Gable Lid to suit 14 Litre Unstirred Baths

Clifton® Stainless steel hinged Gable Lids reduces evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile design allows extended use of the bath, right into the edges of the tank. No drip points and condensate returns back into the bath.

Hinged lids have a number of benefits in use over lift off lids, these simply hinge open, any condensation collects in the lid, samples can be easily removed or placed in water bath. Close the lid and all the collected condensation runs into rear of the water bath. No mess.

Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 50 Holes x 32mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 32mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Wire Basket for 14 Litre Baths

Stainless steel. Baskets recommended for use with Ultrasonic baths.

Bath Armor™ replacement for water in water baths: Pack size 12 litres

The unique properties of the dry media support the samples without blocks, racks, floats or weights.

The cumbersome task and frequency of emptying, cleaning and refilling is simplified and dramatically reduced, resulting in a more productive lab, more successful experiments and less lab downtime.

There is no steam or condensation which may be a nuisance in some labs.

Bar Keepes Friend for cleaning water baths removing dirt and appearance of rust.

Ideal for cleaning stainless steel, in fact all metals, ceramic surfaces, laminates, tiles, plastics and glass.

Thermometer Clip Complete With Bent Stem Spirit Filled Thermometer

Used as a reference to measure actual water temperature of the water bath. Thermometer range 0° to 100°C graduated in 2°C divisions.

Calibration Record

Where equipment requires a Calibration record please order when buying equipment from Clifton® range.

NE3-28DT

28 Litre Unstirred Digital Water Bath with Hinged Clear Lid, False Base, Drain tap and Timers.

« Return to Water Baths Unstirred

Dimensions
External: 538w x 332d x 290hmm
Internal: 500w x 300d x 200hmm
Water level: Maximum 180mm shelf fitted working depth 165mm
Packed: 60 x 40 x 33 cm
Capacity
Nominal Tank Capacity: 28 Litres
Temperature Range
Ambient +5°C - 99°C
Temperature alarm
Under/over temperature alarm is automatically set 4˚C above and 4˚C below set point.
Temperature control
PID Digital, LED display showing actual or set temperature, resolution 0.1°C
Temperature control and run back timer
Indicator and end message variable, 00:01 to 99:59 [hh:mm], activates at set temperature
Temperature control and delay start timer
Heating commences at a set time in future within 24 hours, useful for pre-conditioning water bath ready for use.
Sensitivity
±0.2°C
Uniformity
±0.1°C
Drain
Drain tap fitted, large 12mm bore for fast emptying.
Heater Power (220-240V)
1500 W
Voltage
120V or 230V 50-60Hz
Packed Weight
11 kg
Product Code
NE3-28DT
Description
These NE3 series Clifton Water baths feature precision temperature control with an option to enable a run back or delay start timers, the latter useful for pre-conditioning water temperature before use.

Supplied with clear hinged polycarbonate lid, convenient to use, all condensate runs back into the bath in either open or closed positions. Also featured a durable gated drain tap designed to quickly empty the water bath, painted antibacterial surfaces and touch flush fitting controls, with illuminated LED display for temperature and time values.

Every water bath undergoes a factory calibration at two reference temperatures validating each bath for total confidence in use.

Each bath comes complete with a removable Clifton "low" height stainless steel perforated shelf.

Comprising of a high quality corrosion resistant stainless steel tank, with a bright clean finish housed in a durable paint finished outer case.

Heaters and temperature sensor concealed under the tank providing a clutter free working area easy to wipe clean. The heating footprint covers underside base of the tank, its low mass provides rapid energy transfer; quicker heat up times and reduce energy consumption with improved temperature uniformity.

Featuring side lifting handles for ease of transportation.
Controls
Featuring bold LED display of measured temperatures in real-time, increments of ±0.1°C, using precision PID temperature control. Timer settings variable, 00:01 to 99:59 [hh:mm]. Settings retained even after turning the unit off.

Easy to use splash proof controls, touch keypads for setting temperature values with indicators for heating, timer and over temperature alarm.

Features auto setting over and under temperature alarm protecting your work at set temperature.

Every unit undergoes a factory calibration at two temperatures for validation.
Heat-up Times
  • 19 mins
  • 40 mins
  • 107 mins
Safety Features
Thermal cut out fitted in the heater. IP rated clear booted on/off mains switch. Bath fitted with non-slip rubber feet.

The under/over temperature alarm is automatically set 4˚C above and 4˚C below set temperature. When in alarm condition the indicator illuminates and actual bath temperature is shown, if bath is over temperature heating is switched off. Once liquid temperature has fallen or risen above/below the alarm setting the indicator clears and actual bath temperature is shown, control resumes.
Energy Consumption
0.55kWh @ 37°C
0.55kWh @ 60°C - lid fitted

The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and measured consumption at set point. Please remember that the energy consumption may vary due to factors such as its location, ventilation, ambient temperatures and loading.
Warranty Period
3 Years
Features and Benefits
1.Clifton unstirred water baths are designed for immersion of flasks/bottles/racks in a highly stable temperature environment throughout the water bath. 2. The shelf in the stainless steel tank provides a stable support for flasks/bottles/racks that can be removed for cleaning. The shelf is a low height design maximizing the working height in the bath, either needing less water when compared with traditional water baths or allowing tall containers or vessels to be immersed to a greater working depth. With lower water levels comes the benefit reduced heat up times and energy saving. 3. Three-year warranty and comprehensive customer support. 4. Full use can be made of the bath to provide maximum working area. 5. Three-year warranty and comprehensive customer support. 6. Before leaving our factory each water bath has a unique serial number, electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book. 7. To verify the performance of the temperature control system every unit undergoes a factory calibration adjusting control to known traceable values. 8. Painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by many clinical and laboratory environments. These hygienic surfaces are part of a controlled approach to cleaner facilities. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfection’s. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the finishes

Stainless Steel Gable Lid to fit 22 and 28 Litre Unstirred and Shaking Water Baths

Clifton® Stainless steel Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use

Stainless Steel Hinged Gable Lid to fit 22 and 28 Litre Unstirred and Shaking Water Baths

Clifton® Stainless steel hinged Gable Lids reduces evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile design allows extended use of the bath, right into the edges of the tank. No drip points and condensate returns back into the bath.

Hinged lids have a number of benefits in use over lift off lids, these simply hinge open, any condensation collects in the lid, samples can be easily removed or placed in water bath. Close the lid and all the collected condensation runs into rear of the water bath. No mess.

Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 50 Holes x 32mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 32mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Wire Basket for 22 Litre Baths

Stainless steel. Baskets recommended for use with Ultrasonic baths.

Bath Armor™ replacement for water in water baths: Pack size 12 litres

The unique properties of the dry media support the samples without blocks, racks, floats or weights.

The cumbersome task and frequency of emptying, cleaning and refilling is simplified and dramatically reduced, resulting in a more productive lab, more successful experiments and less lab downtime.

There is no steam or condensation which may be a nuisance in some labs.

Bar Keepes Friend for cleaning water baths removing dirt and appearance of rust.

Ideal for cleaning stainless steel, in fact all metals, ceramic surfaces, laminates, tiles, plastics and glass.

Thermometer Clip Complete With Bent Stem Spirit Filled Thermometer

Used as a reference to measure actual water temperature of the water bath. Thermometer range 0° to 100°C graduated in 2°C divisions.

Calibration Record

Where equipment requires a Calibration record please order when buying equipment from Clifton® range.

NE3-56DT

56 Litre Unstirred Digital Water Bath with Hinged Clear Lid, False Base, Drain tap and Timers.

« Return to Water Baths Unstirred

Dimensions
External: 660w x 540d x 290h mm
Internal: 620w x 500d x 200h mm
Water level maximum: 180mm shelf fitted working depth 165mm
Water level minimum: 55mm shelf fitted working depth 40mm
Packed: 80 x 67 x 35 cm
Capacity
56 litres Nominal capacity
Temperature Range
Ambient +5°C - 99°C
Temperature alarm
Under/over temperature alarm is automatically set 4˚C above and 4˚C below set point.
Temperature control
PID Digital, LED display showing actual or set temperature, resolution 0.1°C
Temperature control and run back timer
Indicator and end message variable, 00:01 to 99:59 [hh:mm], activates at set temperature
Temperature control and delay start timer
Heating commences at a set time in future within 24 hours, useful for pre-conditioning water bath ready for use.
Sensitivity
±0.2°C
Uniformity
±0.1°C
Drain
Drain tap fitted, large 12mm bore for fast emptying.
Heater Power (220-240V)
2500W
Voltage
120V or 230V
Packed Weight
12.5kg
Product Code
NE3-56DT
Safety Features
Thermal cut out fitted in the heater. IP rated clear booted on/off mains switch. Bath fitted with non-slip rubber feet.

The under/over temperature alarm is automatically set 4˚C above and 4˚C below set temperature. When in alarm condition the indicator illuminates and actual bath temperature is shown, if bath is over temperature heating is switched off. Once liquid temperature has fallen or risen above/below the alarm setting the indicator clears and actual bath temperature is shown, control resumes.
Description
These NE3 series Clifton Water baths feature precision temperature control with an option to enable a run back or delay start timers, the latter useful for pre-conditioning water temperature before use.

Supplied with gated drain tap designed to quickly empty the water bath, painted antibacterial surfaces and touch flush fitting controls, with illuminated LED display for temperature and time values.

Every water bath undergoes a factory calibration at two reference temperatures validating each bath for total confidence in use.

Each bath comes complete with a removable Clifton "low" height stainless steel perforated shelf.

Comprising of a high quality corrosion resistant stainless steel tank, with a bright clean finish housed in a durable paint finished outer case.

Heaters and temperature sensor concealed under the tank providing a clutter free working area easy to wipe clean. The heating footprint covers underside base of the tank, its low mass provides rapid energy transfer; quicker heat up times and reduce energy consumption with improved temperature uniformity.

Featuring side lifting handles for ease of transportation.
Controls
Featuring bold LED display of measured temperatures in real-time, increments of ±0.1°C, using precision PID temperature control. Timer settings variable, 00:01 to 99:59 [hh:mm]. Settings retained even after turning the unit off.

Easy to use splash proof controls, touch keypads for setting temperature values with indicators for heating, timer and over temperature alarm.

Features auto setting over and under temperature alarm protecting your work at set temperature.

Every unit undergoes a factory calibration at two temperatures for validation.
Heat-up Times
  • 40 mins
  • 80 mins
  • 180 mins
Energy Consumption
1.1kWh @ 37°C
1kWh @ 60°C - lid fitted

The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and measured consumption at set point. Please remember that the energy consumption may vary due to factors such as its location, ventilation, ambient temperatures and loading.
Warranty Period
3 Years
Features and Benefits
1.Clifton unstirred water baths are designed for immersion of flasks/bottles/racks in a highly stable temperature environment throughout the water bath. 2. The shelf in the stainless steel tank provides a stable support for flasks/bottles/racks that can be removed for cleaning. The shelf is a low height design maximizing the working height in the bath, either needing less water when compared with traditional water baths or allowing tall containers or vessels to be immersed to a greater working depth. With lower water levels comes the benefit reduced heat up times and energy saving. 3. Three-year warranty and comprehensive customer support. 4. Full use can be made of the bath to provide maximum working area. 5. Three-year warranty and comprehensive customer support. 6. Before leaving our factory each water bath has a unique serial number, electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book. 7. To verify the performance of the temperature control system every unit undergoes a factory calibration adjusting control to known traceable values. 8. Painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by many clinical and laboratory environments. These hygienic surfaces are part of a controlled approach to cleaner facilities. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfection’s. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the finishes

Stainless Steel Gable Lid to suit 56 Litre Unstirred Baths

1. The Gable lid has been designed allowing full use of whole width of a Clifton water bath with the lowest height of the gable being 45mm above the bath. This unique feature means test tube racks or flasks can be placed across the whole width of the bath without fouling the lid maximising the bath working area.

Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Polypropylene Spheres

This blanket of hollow spheres is ideal for open tanks of water. Reduces thermal losses - Savings of up to 75% can be achieved with a single layer - Increase energy saving & reducing costs. A single layer of spheres covers 91% of the liquid surface trapping air in the gaps which adds to the thermal insulation properties. Reduces steaming - vapour losses reduced by 90%. Reduce vapours & splashing. No impedance to workload.

Thermometer Clip Complete With Bent Stem Spirit Filled Thermometer

Used as a reference to measure actual water temperature of the water bath. Thermometer range 0° to 100°C graduated in 2°C divisions.

Bar Keepes Friend for cleaning water baths removing dirt and appearance of rust.

Ideal for cleaning stainless steel, in fact all metals, ceramic surfaces, laminates, tiles, plastics and glass.

Lab Bath 4590 Heat Transfer Fluid

Heat transfer fluid working temperature range -15° to +90°C, provides complete protection from freezing, corrosion and algal growth which can wear and damage pumps. Non-Toxic, Non-flammable, Environmentally safe and good heat transfer properties.

56 Litre Stainless Steel Flat Two Piece Lid with Insulated Handles

Two part stainless steel flat lids minimizing heat loss, saving energy, and assisting to maintain bath temperature. Also when a Clifton water bath is 'not in use', with this lid fitted it prevents contamination of liquid from airbourne particles acts as a dust cover. The lid is fitted with an insulated handle.

Calibration Record

Where equipment requires a Calibration record please order when buying equipment from Clifton® range.

Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.