NE2D DuoBaths™

NE2D-4/4

4 Litre + 4 Litre Digital DuoBath™ complete with Stainless Steel Perforated shelves

« Return to Water Baths Unstirred

Dimensions
External: 361w x332d x290h mm
Packed: 47 x 44 x 58 cm
4 litre, tank 1
Internal: 150w x300d x150h mm
Water level: Maximum 130mm Shallow shelf fitted, working depth 115mm
Capacity: 4 litres
4 litre, tank 2
Internal: 150w x300d x150h mm
Water level: Maximum 130mm Shallow shelf fitted, working depth 115mm. Tall shelf fitted, depth 20mm.
Capacity: 4 litres
Temperature Range
Ambient +5°C - 99°C
Temperature alarm
Under/over temperature alarm is automatically set 4˚C above and 4˚C below set point.Individual tank control
Temperature control
PID Digital, LED display showing actual or set temperature, resolution 0.1°C Individual tank control
Temperature control and run back timer
Indicator and end message variable, 00:01 to 99:59 [hh:mm], activates at set temperature. Individual tank control
Sensitivity
±0.2°C
Uniformity
±0.1°C
Cross tank sensitivity
60°C tank effect on 37°C tank +0.1°C.
Heater Power (220-240V)
800W
Voltage
120V or 230V 50-60Hz
Packed Weight
9.8 kg
Product Code
NE2D-4/4
Description
DuobathTM two independently controlled unstirred water baths in one space-saving unit.

Typical applications include: eliminating problems associated with water level/disturbance when placing and removing containers of different sizes or routine operations involving two different temperature and immersed depths such as keeping media molten in one chamber and incubation of samples in the other.

Three shelves are supplied with each DuobathTM, two at conventional low height and a taller 100mm version designed to accommodate small media vessels/bijou style bottles in a shallow depth. Using the conventional height in both chambers gives the benefit of two standard baths in one space saving unit.

Featuring precision temperature control with an option to enable a run back timer. Actual water bath liquid temperature always displayed for complete assurance.

Every water bath undergoes a factory calibration at two reference temperatures validating each tank for total confidence in use.

Comprising of a high quality corrosion resistant stainless steel tank, with a bright clean finish housed in a durable paint finished outer case.

Heaters and temperature sensor concealed under the tank providing a clutter free working area easy to wipe clean. The heating footprint covers underside base of the tank, its low mass provides rapid energy transfer; quicker heat up times and reduce energy consumption with improved temperature uniformity.
Controls
Featuring bold LED display of measured temperatures in real-time, increments of ±0.1°C, using precision PID temperature control. Settings retained even after turning the unit off.

Easy to use splash proof controls, touch keypads for setting temperature values with indicators for heating and over temperature alarm. Bold digital LED display.

Features auto setting over and under temperature alarm protecting your work at set temperature.

Should only one tank be required, a stand by feature can be activated in the control of the tank that's not being used, all heating and control is immobilised. Control can be reinstated as required.

Every unit undergoes a factory calibration at two temperatures for validation.
Heat-up Times
  • 13 mins
  • 28 mins
  • 87 mins
Safety Features
Thermal cut out fitted in the heater. IP rated clear booted on/off mains switch. Bath fitted with non-slip rubber feet.

The under/over temperature alarm is automatically set 4˚C above and 4˚C below set temperature. When in alarm condition the indicator illuminates and actual bath temperature is shown, if bath is over temperature heating is switched off. Once liquid temperature has fallen or risen above/below the alarm setting the indicator clears and actual bath temperature is shown, control resumes.
Power Consumption (220-240V)
800W
Energy Consumption
4 Litre tank 1:
0.2kWh @ 37°C
0.21kWh @ 60°C

4 Litre tank 2:
0.2kWh @ 37°C
0.21kWh @ 60°C

The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and measured consumption at set point. Please remember that the energy consumption may vary due to factors such as its location, ventilation, ambient temperatures and loading.
Warranty Period
3 Years
Features and Benefits
1. DuobathTM two independently controlled unstirred water baths in one space-saving unit. 2. Eliminates problems associated with water level/disturbance when placing and removing containers of different sizes. 3. Suitable where two different temperatures and immersed depths are necessary. 4. Each bath comes complete with two removable Clifton "low" height stainless steel perforated shelves and an additional 100mm tall raised shelf. 5. Feature precision temperature control with an option to enable a run back timer. 6. Auto setting over and under temperature alarm protecting your work at set temperature. 7. Three-year warranty and comprehensive customer support. 8. Full use can be made of the bath to provide maximum working area. 9. Before leaving our factory each water bath has a unique serial number, electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book. 10. To verify the performance of the temperature control system every unit undergoes a factory calibration adjusting control to known traceable values. 11. Painted surfaces and control surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by many clinical and laboratory environments. These hygienic surfaces are part of a controlled approach to cleaner facilities. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfection’s. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the finishes

Lift Off Gable Lid to suit 2 and 4 litre Unstirred Baths

Clifton® clear polycarbonate Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These clear plastic gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use

Stainless Steel Gable Lid to fit 2 and 4 Litre Unstirred Baths

Clifton® Stainless steel Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use

Flat One Piece Stainless Steel Lid for 2 and 4 Litre Baths

Stainless steel flat lid minimizing heat loss, saving energy, and assisting to maintain bath temperature. Also when a Clifton water bath is 'not in use', with this lid fitted it prevents contamination of liquid from airbourne particles acts as a dust cover. The lid is fitted with an insulated handle.

Polypropylene Spheres

This blanket of hollow spheres is ideal for open tanks of water. Reduces thermal losses - Savings of up to 75% can be achieved with a single layer - Increase energy saving & reducing costs. A single layer of spheres covers 91% of the liquid surface trapping air in the gaps which adds to the thermal insulation properties. Reduces steaming - vapour losses reduced by 90%. Reduce vapours & splashing. No impedance to workload.

Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Bath Armor™ replacement for water in water baths: Pack Size: 4 Litres

The unique properties of the dry media support the samples without blocks, racks, floats or weights.

The cumbersome task and frequency of emptying, cleaning and refilling is simplified and dramatically reduced, resulting in a more productive lab, more successful experiments and less lab downtime.

There is no steam or condensation which may be a nuisance in some labs.

Bar Keepes Friend for cleaning water baths removing dirt and appearance of rust.

Ideal for cleaning stainless steel, in fact all metals, ceramic surfaces, laminates, tiles, plastics and glass.

Thermometer Clip Complete With Bent Stem Spirit Filled Thermometer

Used as a reference to measure actual water temperature of the water bath. Thermometer range 0° to 100°C graduated in 2°C divisions.

Draining Syphon

Allows the easy and quick emptying of water baths, immerse into water bath, squeeze the bellow and point the outlet to a bucket or sink.

Calibration Record

Where equipment requires a Calibration record please order when buying equipment from Clifton® range.

NE2D DuoBaths - Serial No 79749 >

PDF File   Instruction Books

NE2D DuoBaths - Serial No 47000 > 61800

PDF File   Instruction Books

Unstirred Water bath range - Boiling, Thermosatic, Digital, Duo, Shaking baths

PDF File   Product Literature

NE2D DuoBaths - Serial No 72223 > 79749

PDF File   Instruction Books

NE2D DuoBaths - Serial No 71800 > 72222

PDF File   Instruction Books

NE2D DuoBaths - Serial No 71100 > 71800

PDF File   Instruction Books

NE2D DuoBaths - Serial No 61801 > 71100

PDF File   Instruction Books

NE2D-4/8

4 Litre + 8 Litre Digital DuoBath™ complete with Stainless Steel Perforated shelves

« Return to Water Baths Unstirred

Dimensions
External: 450w x332d x290h mm
Packed: 47 x 44 58 cm
4 litre, tank 1
Internal: 150w x300d x150h mm
Water level: Maximum 130mm Shallow shelf fitted, working depth 115mm. Tall shelf fitted, depth 20mm.
Capacity: 4 litres
8 litre, tank 2
Internal : 240w x300d x150h mm
Water level: Maximum 130mm Shallow shelf fitted, working depth 115mm
Capapcity: 8 litres
Temperature Range
Ambient +5°C - 99°C
Temperature alarm
Under/over temperature alarm is automatically set 4˚C above and 4˚C below set point.Individual tank control
Temperature control
PID Digital, LED display showing actual or set temperature, resolution 0.1°C.Individual tank control
Temperature control and run back timer
Indicator and end message variable, 00:01 to 99:59 [hh:mm], activates at set temperature.Individual tank control
Sensitivity
±0.2°C
Uniformity
±0.1°C
Cross tank sensitivity
60°C tank effect on 37°C tank +0.1°C.
Heater Power (220-240V)
1200W
Voltage
120V or 230V 50-60Hz
Packed Weight
11.8 kg
Product Code
NE2D-4/8
Description
DuobathTM two independently controlled unstirred water baths in one space-saving unit.

Typical applications include: eliminating problems associated with water level/disturbance when placing and removing containers of different sizes or routine operations involving two different temperature and immersed depths such as keeping media molten in one chamber and incubation of samples in the other.

Three shelves are supplied with each DuobathTM, two at conventional low height and a taller 100mm version designed to accommodate small media vessels/bijou style bottles in a shallow depth. Using the conventional height in both chambers gives the benefit of two standard baths in one space saving unit.

Featuring precision temperature control with an option to enable a run back timer. Actual water bath liquid temperature always displayed for complete assurance.

Every water bath undergoes a factory calibration at two reference temperatures validating each tank for total confidence in use.

Comprising of a high quality corrosion resistant stainless steel tank, with a bright clean finish housed in a durable paint finished outer case.

Heaters and temperature sensor concealed under the tank providing a clutter free working area easy to wipe clean. The heating footprint covers underside base of the tank, its low mass provides rapid energy transfer; quicker heat up times and reduce energy consumption with improved temperature uniformity.


Controls
Featuring bold LED display of measured temperatures in real-time, increments of ±0.1°C, using precision PID temperature control. Settings retained even after turning the unit off.

Easy to use splash proof controls, touch keypads for setting temperature values with indicators for heating and over temperature alarm. Bold digital LED display.

Features auto setting over and under temperature alarm protecting your work at set temperature.

Should only one tank be required, a stand by feature can be activated in the control of the tank that's not being used, all heating and control is immobilised. Control can be reinstated as required.

Every unit undergoes a factory calibration at two temperatures for validation.
Heat-up Times
  • 12 mins
  • 25 mins
  • 59 mins
Safety Features
Thermal cut out fitted in the heater. IP rated clear booted on/off mains switch. Bath fitted with non-slip rubber feet.

The under/over temperature alarm is automatically set 4˚C above and 4˚C below set temperature. When in alarm condition the indicator illuminates and actual bath temperature is shown, if bath is over temperature heating is switched off. Once liquid temperature has fallen or risen above/below the alarm setting the indicator clears and actual bath temperature is shown, control resumes.
Power Consumption (220-240V)
1200W
Energy Consumption
4 Litre tank 1:
0.2kWh @ 37°C
0.21kWh @ 60°C

8 Litre tank 2:
0.33kWh @ 37°C
0.34kWh @ 60°C

The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and measured consumption at set point. Please remember that the energy consumption may vary due to factors such as its location, ventilation, ambient temperatures and loading.
Warranty Period
3 Years
Features and Benefits
1. DuobathTM two independently controlled unstirred water baths in one space-saving unit. 2. Eliminates problems associated with water level/disturbance when placing and removing containers of different sizes. 3. Suitable where two different temperatures and immersed depths are necessary. 4. Each bath comes complete with two removable Clifton "low" height stainless steel perforated shelves and an additional 100mm tall raised shelf. 5. Feature precision temperature control with an option to enable a run back timer. 6. Auto setting over and under temperature alarm protecting your work at set temperature. 7. Three-year warranty and comprehensive customer support. 8. Full use can be made of the bath to provide maximum working area. 9. Before leaving our factory each water bath has a unique serial number, electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book. 10. To verify the performance of the temperature control system every unit undergoes a factory calibration adjusting control to known traceable values. 11. Painted surfaces and control surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by many clinical and laboratory environments. These hygienic surfaces are part of a controlled approach to cleaner facilities. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfection’s. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the finishes

Lift Off Gable Lid to suit 2 and 4 litre Unstirred Baths

Clifton® clear polycarbonate Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These clear plastic gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use

Lift Off Gable Lid to suit 8 and 10 Litre Unstirred and Shaking Water baths

Clifton® clear Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use

Stainless Steel Gable Lid to fit 2 and 4 Litre Unstirred Baths

Clifton® Stainless steel Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use

Stainless Steel Gable Lid to fit 8 and 10 Litre Unstirred and Shaking Water Baths

Clifton® Stainless steel Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use

Flat One Piece Stainless Steel Lid for 2 and 4 Litre Baths

Stainless steel flat lid minimizing heat loss, saving energy, and assisting to maintain bath temperature. Also when a Clifton water bath is 'not in use', with this lid fitted it prevents contamination of liquid from airbourne particles acts as a dust cover. The lid is fitted with an insulated handle.

Flat One Piece Stainless Steel Lid for 8 Litre Baths

1. Prevents contamination of liquid from airbourne particles.

2. Saves energy when the bath is in use by reducing heat losses.

3. Insulated handle.

Polypropylene Spheres

This blanket of hollow spheres is ideal for open tanks of water. Reduces thermal losses - Savings of up to 75% can be achieved with a single layer - Increase energy saving & reducing costs. A single layer of spheres covers 91% of the liquid surface trapping air in the gaps which adds to the thermal insulation properties. Reduces steaming - vapour losses reduced by 90%. Reduce vapours & splashing. No impedance to workload.

Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Bath Armor™ replacement for water in water baths: Pack Size: 4 Litres

The unique properties of the dry media support the samples without blocks, racks, floats or weights.

The cumbersome task and frequency of emptying, cleaning and refilling is simplified and dramatically reduced, resulting in a more productive lab, more successful experiments and less lab downtime.

There is no steam or condensation which may be a nuisance in some labs.

Bath Armor™ replacement for water in water baths: Pack size 12 litres

The unique properties of the dry media support the samples without blocks, racks, floats or weights.

The cumbersome task and frequency of emptying, cleaning and refilling is simplified and dramatically reduced, resulting in a more productive lab, more successful experiments and less lab downtime.

There is no steam or condensation which may be a nuisance in some labs.

Bar Keepes Friend for cleaning water baths removing dirt and appearance of rust.

Ideal for cleaning stainless steel, in fact all metals, ceramic surfaces, laminates, tiles, plastics and glass.

Thermometer Clip Complete With Bent Stem Spirit Filled Thermometer

Used as a reference to measure actual water temperature of the water bath. Thermometer range 0° to 100°C graduated in 2°C divisions.

Draining Syphon

Allows the easy and quick emptying of water baths, immerse into water bath, squeeze the bellow and point the outlet to a bucket or sink.

Calibration Record

Where equipment requires a Calibration record please order when buying equipment from Clifton® range.

NE2D DuoBaths - Serial No 79749 >

PDF File   Instruction Books

Unstirred Water bath range - Boiling, Thermosatic, Digital, Duo, Shaking baths

PDF File   Product Literature

NE2D DuoBaths - Serial No 72223 > 79749

PDF File   Instruction Books

NE2D DuoBaths - Serial No 71800 > 72222

PDF File   Instruction Books

NE2D DuoBaths - Serial No 71100 > 71800

PDF File   Instruction Books

NE2D DuoBaths - Serial No 61801 > 71100

PDF File   Instruction Books

NE2D DuoBaths - Serial No 47000 > 61800

PDF File   Instruction Books

NE2D-8/22

8 Litre + 22 Litre Digital DuoBath™ complete with Stainless Steel Perforated shelves and Drain Outle

« Return to Water Baths Unstirred

Dimensions
External: 800w x 332d x 290h mm
Packed: 47 x 44 x 96 cm
8 litre, tank 1
Internal: 240w x300d x150h mm
Water level: Maximum 130mm Shallow shelf fitted, working depth 115mm. Tall shelf fitted, depth 20mm.
Capacity : 8 litres
22 litre, tank 2
Internal: 500w x 300d x 150h mm
Water level: Maximum 130mm Shallow shelf fitted, working depth 115mm
Capacity: 22 litres
Temperature Range
Ambient +5°C - 99°C
Temperature alarm
Under/over temperature alarm is automatically set 4˚C above and 4˚C below set point.Individual tank control
Temperature control
PID Digital, LED display showing actual or set temperature, resolution 0.1°C.Individual tank control
Temperature control and run back timer
Indicator and end message variable, 00:01 to 99:59 [hh:mm], activates at set temperature. Individual tank control
Sensitivity
±0.2°C
Uniformity
±0.1°C
Cross tank sensitivity
60°C tank effect on 37°C tank +0.1°C.
Heater Power (220-240V)
2500W
Drain
Drain outlet fitted in 22 litre tank2, large 12mm bore for fast emptying an accessory tap can be be added for convenience
Voltage
230V 50-60Hz
Packed Weight
15.8kg
Product Code
NE2D-8/22
Description
DuobathTM two independently controlled unstirred water baths in one space-saving unit.

Typical applications include: eliminating problems associated with water level/disturbance when placing and removing containers of different sizes or routine operations involving two different temperature and immersed depths such as keeping media molten in one chamber and incubation of samples in the other.

Three shelves are supplied with each DuobathTM, two at conventional low height and a taller 100mm version designed to accommodate small media vessels/bijou style bottles in a shallow depth. Using the conventional height in both chambers gives the benefit of two standard baths in one space saving unit.

Featuring precision temperature control with an option to enable a run back timer. Actual water bath liquid temperature always displayed for complete assurance.

Every water bath undergoes a factory calibration at two reference temperatures validating each tank for total confidence in use.

Comprising of a high quality corrosion resistant stainless steel tank, with a bright clean finish housed in a durable paint finished outer case.

Heaters and temperature sensor concealed under the tank providing a clutter free working area easy to wipe clean. The heating footprint covers underside base of the tank, its low mass provides rapid energy transfer; quicker heat up times and reduce energy consumption with improved temperature uniformity.
Controls
Featuring bold LED display of measured temperatures in real-time, increments of ±0.1°C, using precision PID temperature control. Settings retained even after turning the unit off.

Easy to use splash proof controls, touch keypads for setting temperature values with indicators for heating and over temperature alarm. Bold digital LED display.

Features auto setting over and under temperature alarm protecting your work at set temperature. Should only one tank be required, a stand by feature can be activated in the control of the tank that's not being used, all heating and control is immobilised. Control can be reinstated as required.

Every unit undergoes a factory calibration at two temperatures for validation.
Heat-up Times
  • 20 mins
  • 43 mins
  • 92 mins
Safety Features
Thermal cut out fitted in the heater. IP rated clear booted on/off mains switch. Bath fitted with non-slip rubber feet.

The under/over temperature alarm is automatically set 4˚C above and 4˚C below set temperature. When in alarm condition the indicator illuminates and actual bath temperature is shown, if bath is over temperature heating is switched off. Once liquid temperature has fallen or risen above/below the alarm setting the indicator clears and actual bath temperature is shown, control resumes.
Power Consumption (220-240V)
2500W
Energy Consumption
8 Litre tank 1:
0.33kWh @ 37°C
0.34kWh @ 60°C

22 Litre tank 2:
0.55kWh @ 37°C
0.45kWh @ 60°C

The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and measured consumption at set point. Please remember that the energy consumption may vary due to factors such as its location, ventilation, ambient temperatures and loading.
Warranty Period
3 Years
Features and Benefits
1. DuobathTM two independently controlled unstirred water baths in one space-saving unit. 2. Eliminates problems associated with water level/disturbance when placing and removing containers of different sizes. 3. Suitable where two different temperatures and immersed depths are necessary. 4. Each bath comes complete with two removable Clifton "low" height stainless steel perforated shelves and an additional 100mm tall raised shelf. 5. Feature precision temperature control with an option to enable a run back timer. 6. Auto setting over and under temperature alarm protecting your work at set temperature. 7. Three-year warranty and comprehensive customer support. 8. Full use can be made of the bath to provide maximum working area. 9. Before leaving our factory each water bath has a unique serial number, electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book. 10. To verify the performance of the temperature control system every unit undergoes a factory calibration adjusting control to known traceable values. 11. Painted surfaces and control surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by many clinical and laboratory environments. These hygienic surfaces are part of a controlled approach to cleaner facilities. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfection’s. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the finishes

Lift Off Gable Lid to suit 8 and 10 Litre Unstirred and Shaking Water baths

Clifton® clear Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use

Lift Off Gable Lid to suit 9, 22 and 28 Litre Unstirred and Shaking Water Baths

Clifton® clear Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use

Stainless Steel Gable Lid to fit 8 and 10 Litre Unstirred and Shaking Water Baths

Clifton® Stainless steel Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use

Stainless Steel Gable Lid to fit 22 and 28 Litre Unstirred and Shaking Water Baths

Clifton® Stainless steel Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use

Flat One Piece Stainless Steel Lid for 8 Litre Baths

1. Prevents contamination of liquid from airbourne particles.

2. Saves energy when the bath is in use by reducing heat losses.

3. Insulated handle.

Flat One Piece Stainless Steel Lid for 22 Litre Baths

Stainless steel flat lid minimizing heat loss, saving energy, and assisting to maintain bath temperature. Also when a Clifton water bath is 'not in use', with this lid fitted it prevents contamination of liquid from airbourne particles acts as a dust cover. The lid is fitted with an insulated handle.

Polypropylene Spheres

This blanket of hollow spheres is ideal for open tanks of water. Reduces thermal losses - Savings of up to 75% can be achieved with a single layer - Increase energy saving & reducing costs. A single layer of spheres covers 91% of the liquid surface trapping air in the gaps which adds to the thermal insulation properties. Reduces steaming - vapour losses reduced by 90%. Reduce vapours & splashing. No impedance to workload.

Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Bath Armor™ replacement for water in water baths: Pack size 12 litres

The unique properties of the dry media support the samples without blocks, racks, floats or weights.

The cumbersome task and frequency of emptying, cleaning and refilling is simplified and dramatically reduced, resulting in a more productive lab, more successful experiments and less lab downtime.

There is no steam or condensation which may be a nuisance in some labs.

Bar Keepes Friend for cleaning water baths removing dirt and appearance of rust.

Ideal for cleaning stainless steel, in fact all metals, ceramic surfaces, laminates, tiles, plastics and glass.

Drain Tap - for Water baths with serial numbers upto 75100

1. Providing a gated on/off valve to empty fluids conveniently from the bath.

2. Nozzle supplied with tap for laboratory tubing.

Drain Tap - for Water baths with serial numbers greater than 75100

1. Providing a gated on/off valve to empty fluids conveniently from the bath.

2. Nozzle supplied with tap for laboratory tubing.

Thermometer Clip Complete With Bent Stem Spirit Filled Thermometer

Used as a reference to measure actual water temperature of the water bath. Thermometer range 0° to 100°C graduated in 2°C divisions.

Calibration Record

Where equipment requires a Calibration record please order when buying equipment from Clifton® range.

NE2D DuoBaths - Serial No 79749 >

PDF File   Instruction Books

Unstirred Water bath range - Boiling, Thermosatic, Digital, Duo, Shaking baths

PDF File   Product Literature

NE2D DuoBaths - Serial No 72223 > 79749

PDF File   Instruction Books

NE2D DuoBaths - Serial No 71800 > 72222

PDF File   Instruction Books

NE2D DuoBaths - Serial No 71100 > 71800

PDF File   Instruction Books

NE2D DuoBaths - Serial No 61801 > 71100

PDF File   Instruction Books

NE2D DuoBaths - Serial No 47000 > 61800

PDF File   Instruction Books