Boiling Baths NE1B

NE1B-14

14 Litre Unstirred Boiling Bath

« Return to Water Baths Unstirred

Dimensions
External: 362w x 332d x 290h mm
Internal: 325w x 300d x 150h mm
Water level: Minimum and maximum water level are governed by the constant level which maintains water level during boiling. Using standard laboratory tubing, connect the bottom outlet of the constant level to a regulated water supply/tap and adjust to supply a slow feed of water while maintaining boiling and this will automatically maintain a safe water level. The side outlet acts as an overflow to a sink or drain.
Packed: 45 x 41 x 32 cm
Capacity
Nominal Tank Capacity: 14 Litres
Temperature Range
Simmer to Boiling @ 100°C
Temperature control
Featuring an energy regulator controls the amount of boiling from a gentle simmer to vigorous boil.
Heater Power (220-240V)
2500W
Voltage
230V
Packed Weight
7.7 kg
Product Code
NE1B-14
Description
Designed for applications that require continuous boiling. This bath also has the flexibility where the control can be regulated from a gentle simmer to a vigorous boil.

Comprising of a stainless steel tank housed in a durable paint finished outer case. Painted surfaces feature a tough anti-bacterial finish with good chemical resistance. Complete with a removable stainless steel perforated false base. The bath, which is simmer-statically controlled, is ideally suited to prolonged periods of boiling.

Fitted with a sheathed immersion element and thermal safety cut out. With the heater directly immersed in water it provides rapid boiling. A standard feature is a constant level device, which maintains a fixed level of liquid thereby eliminating the need to regularly top up the bath.

Registered Community Design No 002515296-0001 and 002515296-0002

Controls
Analogue dial with proportional 1 to 10 scale.

Illuminated on/off switch and heater indication lamp.

Heating/Cooling Information
The bath can control the amount of boiling from a gentle simmer to a vigorous boil.

Above 60°C it is recommended that to achieve optimum performance the bath should be covered with a lid or layer of polypropylene spheres. Covering the bath with a lid also reduces energy consumption and running costs.

Time taken to boil water based on gable lid fitted, filled with cold water up to constant level.
Heat-up Times
  • 25 mins
Safety Features
Thermal cut out fitted in the heater.

Always connect the constant level with laboratory tubing to a water supply, adjust the flow to gently top up the water level, whilst maintaining boiling.

Power Consumption (220-240V)
2500W
Drain Tap Fitted
No
Warranty Period
3 Years
Features and Benefits
1. Clifton boiling bath is designed for applications that require continuous boiling. 2. The shelf/platform in the bath used for supporting flasks/bottles/racks is stable and can be easily removed and cleaned. 3. Stainless steel tank which is corrosion resistant and easy to clean. 4. Constant level device combats water evaporation, saving you from remembering to top up the bath in use, which occurs quickly with boiling water. 5. Control can be regulated from gentle simmer to vigorous boil. 6. High wattage heater directly immersed in the water for rapid boiling. 7. Recessed side-lifting handles for ease of transportation. 8. Broad range of accessories available to suit wide range of applications. 9. Each bath is uniquely identified with its own serial number recorded on our product database, which includes all of its manufacturing inspection data. Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book. 10. Painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfections. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the paint finish.

Stainless Steel Hinged Gable Lid to suit 14 and 18 Litre Boiling Baths

Clifton® Stainless steel hinged Gable Lids reduces evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile design allows extended use of the bath, right into the edges of the tank. No drip points and condensate returns back into the bath.

Hinged lids have a number of benefits in use over lift off lids, these simply hinge open, any condensation collects in the lid, samples can be easily removed or placed in water bath. Close the lid and all the collected condensation runs into rear of the water bath. No mess.

Polypropylene Spheres

This blanket of hollow spheres is ideal for open tanks of water. Reduces thermal losses - Savings of up to 75% can be achieved with a single layer - Increase energy saving & reducing costs. A single layer of spheres covers 91% of the liquid surface trapping air in the gaps which adds to the thermal insulation properties. Reduces steaming - vapour losses reduced by 90%. Reduce vapours & splashing. No impedance to workload.

Flat One Piece Stainless Steel Lid for 14 Litre Baths

Stainless steel flat lid minimizing heat loss, saving energy, and assisting to maintain bath temperature. Also when a Clifton water bath is 'not in use', with this lid fitted it prevents contamination of liquid from airbourne particles acts as a dust cover. The lid is fitted with an insulated handle.

4 x 105mm Stainless Steel Concentric Ringed Lid to suit 14 Litre Unstirred Baths

The lid and rings are manufactured from stainless steel. The concentric rings provide varying hole diameters in the lid. In use the lid minimises evaporation and maintains temperature stability of the water bath when tall vessels are being heated at elevated temperatures.

6 x 83mm Stainless Steel Concentric Ringed Lid to suit 14 Litre Unstirred Baths

The lid and rings are manufactured from stainless steel. The concentric rings provide varying hole diameters in the lid. In use the lid minimises evaporation and maintains temperature stability of the water bath when tall vessels are being heated at elevated temperatures.

4 x 114.5mm Stainless Steel Concentric Ringed Lid to suit 14 Litre Unstirred Baths

The lid and rings are manufactured from stainless steel. The concentric rings provide varying hole diameters in the lid. In use the lid minimises evaporation and maintains temperature stability of the water bath when tall vessels are being heated at elevated temperatures.

Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 50 Holes x 32mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 32mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Wire Basket for 14 Litre Baths

Stainless steel. Baskets recommended for use with Ultrasonic baths.

Draining Syphon

Allows the easy and quick emptying of water baths, immerse into water bath, squeeze the bellow and point the outlet to a bucket or sink.

Thermometer Clip Complete With Bent Stem Spirit Filled Thermometer

Used as a reference to measure actual water temperature of the water bath. Thermometer range 0° to 100°C graduated in 2°C divisions.

NE1B-18W

18 Litre Unstirred Boiling Bath - deep fill

« Return to Water Baths Unstirred

Dimensions
External: 362w x 332d x 290h mm
Internal: 325w x 300d x 200h mm
Water level: Minimum and maximum water level are governed by the constant level which maintains water level during boiling. Using standard laboratory tubing, connect the bottom outlet of the constant level to a regulated water supply/tap and adjust to supply a slow feed of water while maintaining boiling and this will automatically maintain a safe water level. The side outlet acts as an overflow to a sink or drain.
Packed: 45 x 41 x 32 cm
Temperature control
Featuring an energy regulator controls the amount of boiling from a gentle simmer to vigorous boil.
Temperature Range
Simmer to boiling @100°C
Capacity
Nominal Tank Capacity: 18 Litres
Heater Power (220-240V)
2500W
Voltage
230V
Packed Weight
8kg
Product Code
NE1B-18W
Description
This deep boiling bath is designed for applications that require continuous boiling with the flexibility where control can be regulated from a gentle simmer to a vigorous boil. It can be fitted with an accessory Tray to conveniently immerse and raise items into boiling water. This Boiling bath is particularly suitable for immersion of tall vessels.

Comprising of a stainless steel tank housed in a durable paint finished outer case. Painted surfaces feature a tough anti-bacterial finish with good chemical resistance. Complete with a removable stainless steel perforated false base. The bath, which is simmer-statically controlled, is ideally suited to prolonged periods of boiling.

Fitted with a sheathed immersion element and thermal safety cut out. With the heater directly immersed in water it provides rapid boiling. A standard feature is a constant level device, which maintains a fixed level of liquid thereby eliminating the need to regularly top up the bath.
Controls
Analogue dial with proportional 1 to 10 scale. Illuminated on/off switch and heater indication lamp.
Heating/Cooling Information
The bath can control the amount of boiling from a gentle simmer to a vigorous boil.

Above 60°C it is recommended that to achieve optimum performance the bath should be covered with a lid or layer of polypropylene spheres. Covering the bath with a lid also reduces energy consumption and running costs.

Time taken to Boil water based on gable lid fitted, filled with cold water up to constant level.
Heat-up Times
  • 30 mins
Safety Features
Thermal cut out fitted in the heater. Always connect the constant level with laboratory tubing to a water supply, adjust the flow to gently top up the water level, whilst maintaining boiling.
Power Consumption (220-240V)
2500W
Drain Tap Fitted
Drain outlet for accessory gated tap.
Warranty Period
3 Years
Features and Benefits
1. Clifton boiling bath is designed for applications that require continuous boiling. 2. The shelf/platform in the bath used for supporting flasks/bottles/racks is stable and can be easily removed and cleaned. 3. Stainless steel tank which is corrosion resistant and easy to clean. 4. Constant level device combats water evaporation, saving you from remembering to top up the bath in use, which occurs quickly with boiling water. 5. Control can be regulated from gentle simmer to vigorous boil. 6. High wattage heater directly immersed in the water for rapid boiling. 7. Recessed side-lifting handles for ease of transportation. 8. Broad range of accessories available to suit wide range of applications. 9. Each bath is uniquely identified with its own serial number recorded on our product database, which includes all of its manufacturing inspection data. Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book. 10. Painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfections. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the paint finish.

Stainless Steel Hinged Gable Lid to suit 14 and 18 Litre Boiling Baths

Clifton® Stainless steel hinged Gable Lids reduces evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile design allows extended use of the bath, right into the edges of the tank. No drip points and condensate returns back into the bath.

Hinged lids have a number of benefits in use over lift off lids, these simply hinge open, any condensation collects in the lid, samples can be easily removed or placed in water bath. Close the lid and all the collected condensation runs into rear of the water bath. No mess.

Raise and Lower Sterilizing Tray

1. Raise and lower Tray.

2. Easy to clean.

3. Large insulated handles to allow safe use.

4. Excess hot water drains back into boiling bath once tray is raised.

5. Using accessory SA01409 Pair of Guide rails with ST-1 the Tray can be parked or raised to varying heights in the Boiling bath.

Pair of guide rail assemblies for ST-1 Tray - NE1B-18

1. Allows ST-1 Tray to be raised or lowered safely on guides.

2. Easy to remove and clean.

3. Using this accessory SA01409 Pair of Guide rails with ST-1 the Tray can be parked or raised to varying heights in the Boiling bath.

Flat One Piece Stainless Steel Lid for 14 Litre Baths

Stainless steel flat lid minimizing heat loss, saving energy, and assisting to maintain bath temperature. Also when a Clifton water bath is 'not in use', with this lid fitted it prevents contamination of liquid from airbourne particles acts as a dust cover. The lid is fitted with an insulated handle.

Polypropylene Spheres

This blanket of hollow spheres is ideal for open tanks of water. Reduces thermal losses - Savings of up to 75% can be achieved with a single layer - Increase energy saving & reducing costs. A single layer of spheres covers 91% of the liquid surface trapping air in the gaps which adds to the thermal insulation properties. Reduces steaming - vapour losses reduced by 90%. Reduce vapours & splashing. No impedance to workload.

4 x 105mm Stainless Steel Concentric Ringed Lid to suit 14 Litre Unstirred Baths

The lid and rings are manufactured from stainless steel. The concentric rings provide varying hole diameters in the lid. In use the lid minimises evaporation and maintains temperature stability of the water bath when tall vessels are being heated at elevated temperatures.

6 x 83mm Stainless Steel Concentric Ringed Lid to suit 14 Litre Unstirred Baths

The lid and rings are manufactured from stainless steel. The concentric rings provide varying hole diameters in the lid. In use the lid minimises evaporation and maintains temperature stability of the water bath when tall vessels are being heated at elevated temperatures.

4 x 114.5mm Stainless Steel Concentric Ringed Lid to suit 14 Litre Unstirred Baths

The lid and rings are manufactured from stainless steel. The concentric rings provide varying hole diameters in the lid. In use the lid minimises evaporation and maintains temperature stability of the water bath when tall vessels are being heated at elevated temperatures.

Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Drain Tap - for Water baths with serial numbers greater than 75100

1. Providing a gated on/off valve to empty fluids conveniently from the bath.

2. Nozzle supplied with tap for laboratory tubing.

Stainless Steel Wire Basket for 14 Litre Baths

Stainless steel. Baskets recommended for use with Ultrasonic baths.

Draining Syphon

Allows the easy and quick emptying of water baths, immerse into water bath, squeeze the bellow and point the outlet to a bucket or sink.

Thermometer Clip Complete With Bent Stem Spirit Filled Thermometer

Used as a reference to measure actual water temperature of the water bath. Thermometer range 0° to 100°C graduated in 2°C divisions.

NE1B-28

28 Litre Unstirred Boiling Bath

« Return to Water Baths Unstirred

Dimensions
External: 538w x 332d x 290h mm
Internal: 500w x 300d x 200h mm
Water level: Minimum and maximum water level are governed by the constant level which maintains water level during boiling. Using standard laboratory tubing, connect the bottom outlet of the constant level to a regulated water supply/tap and adjust to supply a slow feed of water while maintaining boiling and this will automatically maintain a safe water level. The side outlet acts as an overflow to a sink or drain.
Packed: 62 x 41 x 37cm
Temperature control
Featuring an energy regulator controls the amount of boiling from a gentle simmer to vigorous boil.
Temperature Range
Simmer to Boiling @ 100°C
Capacity
Nominal Tank Capacity: 28 Litres
Heater Power (220-240V)
2500 Watts
Voltage
230V
Packed Weight
12.5 kg
Product Code
NE1B-28
Description
Designed for applications that require continuous boiling. This bath also has the flexibility where the control can be regulated from a gentle simmer to a vigorous boil.

Comprising of a stainless steel tank housed in a durable paint finished outer case. Painted surfaces feature a tough anti-bacterial finish with good chemical resistance. Complete with a removable stainless steel perforated false base. The bath, which is simmer-statically controlled, is ideally suited to prolonged periods of boiling.

Fitted with a sheathed immersion element and thermal safety cut out. With the heater directly immersed in water it provides rapid boiling. A standard feature is a constant level device, which maintains a fixed level of liquid thereby eliminating the need to regularly top up the bath.
Controls
Analogue dial with proportional 1 to 10 scale.

Illuminated on/off switch and heater indication lamp.

Heating/Cooling Information
The bath can control the amount of boiling from a gentle simmer to a vigorous boil.

Above 60°C it is recommended that to achieve optimum performance the bath should be covered with a lid or layer of polypropylene spheres. Covering the bath with a lid also reduces energy consumption and running costs.

Time taken to Boil water based on gable lid fitted, filled with cold water up to constant level.
Heat-up Times
  • 45 mins
Safety Features
Thermal cut out fitted in the heater.

Always connect the constant level with laboratory tubing to a water supply, adjust the flow to gently top up the water level, whilst maintaining boiling.

Power Consumption (220-240V)
2500 Watts
Drain Tap Fitted
Drain outlet for accessory gated tap
Warranty Period
3 Years
Features and Benefits
1. Clifton boiling bath is designed for applications that require continuous boiling. 2. The shelf/platform in the bath used for supporting flasks/bottles/racks is stable and can be easily removed and cleaned. 3. Stainless steel tank which is corrosion resistant and easy to clean. 4. Constant level device combats water evaporation, saving you from remembering to top up the bath in use, which occurs quickly with boiling water. 5. Control can be regulated from gentle simmer to vigorous boil. 6. High wattage heater directly immersed in the water for rapid boiling. 7. Recessed side-lifting handles for ease of transportation. 8. Broad range of accessories available to suit wide range of applications. 9. Each bath is uniquely identified with its own serial number recorded on our product database, which includes all of its manufacturing inspection data. Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book. 10. Painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfections. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the paint finish.

Stainless Steel Gable Lid to fit 22 and 28 Litre Boiling Baths

1. The Clifton Gable lid has been designed allowing full use of whole width of a Clifton water bath with the lowest height of the gable being 45mm above the bath. This unique feature means test tube racks or flasks can be placed across the whole width of the bath without fouling the lid maximising the bath working area.

2. Designed with customer in mind ensuring where condensation accumulates in use there are no drip points which could spoil work in open flasks in your Clifton water bath.

3. Water evaporation is reduced at elevated temperatures, maintaining water levels in the Clifton water bath.

4. Where an accessory TC-1 Thermometer is used the temperature can be read from the thermometer with the lid in place.

5. Lid fits into the tank ensuring all condensation runs back into the bath and not down the side onto your bench top.

6. Reduces energy consumption and running costs for your Clifton water bath.

7. Insulated handle.

Polypropylene Spheres

This blanket of hollow spheres is ideal for open tanks of water. Reduces thermal losses - Savings of up to 75% can be achieved with a single layer - Increase energy saving & reducing costs. A single layer of spheres covers 91% of the liquid surface trapping air in the gaps which adds to the thermal insulation properties. Reduces steaming - vapour losses reduced by 90%. Reduce vapours & splashing. No impedance to workload.

Flat One Piece Stainless Steel Lid for 22 Litre Baths

Stainless steel flat lid minimizing heat loss, saving energy, and assisting to maintain bath temperature. Also when a Clifton water bath is 'not in use', with this lid fitted it prevents contamination of liquid from airbourne particles acts as a dust cover. The lid is fitted with an insulated handle.

Stainless Steel Ringed Lid to fit 9, 22 & 28 Litre Unstirred Baths 6 x 105mm Holes

The lid and rings are manufactured from stainless steel. The concentric rings provide varying hole diameters in the lid. In use the lid minimises evaporation and maintains temperature stability of the water bath when tall vessels are being heated at elevated temperatures.

Stainless Steel Ringed Lid to fit 9, 22 & 28 Litre Unstirred Baths 6 x 114.5mm Holes

The lid and rings are manufactured from stainless steel. The concentric rings provide varying hole diameters in the lid. In use the lid minimises evaporation and maintains temperature stability of the water bath when tall vessels are being heated at elevated temperatures.

Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 50 Holes x 32mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 32mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Wire Basket for 22 Litre Baths

Stainless steel. Baskets recommended for use with Ultrasonic baths.

Drain Tap - for Water baths with serial numbers greater than 75100

1. Providing a gated on/off valve to empty fluids conveniently from the bath.

2. Nozzle supplied with tap for laboratory tubing.

Draining Syphon

Allows the easy and quick emptying of water baths, immerse into water bath, squeeze the bellow and point the outlet to a bucket or sink.

Thermometer Clip Complete With Bent Stem Spirit Filled Thermometer

Used as a reference to measure actual water temperature of the water bath. Thermometer range 0° to 100°C graduated in 2°C divisions.