NE6 Flow Heaters

NE6-FH

Flow through Heater

« Return to Water Baths Stirred

Dimensions
External: 260w x 295d x 150h mm
Silicone Hoses : 2 off, 2m long
Capacity
22 litre Recommended maximum working capacity
Temperature alarm
Over temperature alarm is automatically set 12˚C above set point.
Temperature Range
Ambient +5°C - 80°C
Sensitivity
>±0.01°C
Voltage
230V
Heater Power (220-240V)
1000W
Product Code
NE6-FH
Description
The Clifton Flow Heater provides a constant pumped flow of temperature-controlled liquid to an external open tank or closed system.

All immersed components are corrosion resistant for long and durable life. Using a powerful pump to circulate water from inlet through a temperature controlled heat exchanger to outlet pipe. Precise PID temperature control.

Featuring an easy to fit fluid inlet and outlet connections on rear of unit, which are clearly identified, for circulating temperature-controlled liquids.

Can either be sited on a bench top or positioned remotely making best use of available space.

Heating/Cooling Information
Above 60°C or below ambient it is recommended that to achieve optimum performance any open bath this is connected to should be covered with a layer of polypropylene spheres - see accessories.
Safety Features
Heat exchanger protected by thermal cut out. When a low liquid level is detected a “FiLL” message automatically appears and heating is suspended.
Power Consumption (220-240V)
1250W

22L Clifton Bath with barb inlet and outlet fittings

Where an external vessel of circulating temperature controlled water is required this accessory Clifton 22L Bath is designed to be used in conjunction with Clifton NE6 Flow Heater. This bath features double walled construction, external surfaces have an anti-bacterial paint finish, the inner tank bright stainless steel with inlet and outlet barbs for push fit connection with Clifton NE6-FH Flow Heater.

Clifton 22 Litre Stainless Steel Tank

22 Litre Stainless Steel Tank providing an external vessel of circulating temperature controlled water. This bath features double walled construction, external surfaces have an anti-bacterial paint finish, the inner tank bright stainless steel. In use submerge Inlet and outlet hoses under water from NE6-FH Clifton Flow Heater.

Polypropylene Spheres

This blanket of hollow spheres is ideal for open tanks of water. Reduces thermal losses - Savings of up to 75% can be achieved with a single layer - Increase energy saving & reducing costs. A single layer of spheres covers 91% of the liquid surface trapping air in the gaps which adds to the thermal insulation properties. Reduces steaming - vapour losses reduced by 90%. Reduce vapours & splashing. No impedance to workload.

Lift Off Gable Lid to suit 9, 22 and 28 Litre Unstirred and Shaking Water Baths

Clifton® clear Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use

Stainless Steel Gable Lid to fit 22 and 28 Litre Unstirred and Shaking Water Baths

Clifton® Stainless steel Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use

Calibration Record

Where equipment requires a Calibration record please order when buying equipment from Clifton® range.

NE6-FH Clifton Flow Heater Instructions

PDF File   Instruction Books