NE5 Shaking Water Baths

NE5-10D

10 Litre Digital Shaking Water Bath and perforated tray

« Return to Water Baths Shakers

Dimensions
External: 449w x 332d x 290h mm
Internal: 242w x 300d x 200h mm
Perforated trolley size: 175w x 270d mm
Maximum water level: 120mm above perforated trolley
Minimum water level: 50mm above perforated trolley
Packed: 45 x 41 x 32mm
Capacity
Capacity: 10 Litres
Temperature control
PID Digital, LED display showing actual and set temperature, resolution 0.1°C
Temperature Range
Ambient + 5°C - 99°C
Temperature alarm
Under/over temperature alarm is automatically set 4˚C above and 4˚C below set point.
Sensitivity
±0.1°C @ 45°C optimal water level 75 to 120mm
Uniformity
±0.1°C @ 45°C optimal water level 75 to 120mm
Heater Power (220-240V)
800W
Linear shaking control
Shaking control from 0 to 400rpm stroke length fixed 20mm
Voltage
230V 50 - 60Hz
Packed Weight
14.5 kg
Product Code
NE5-10D
Description
Clifton® Shaking water bath, featuring precision PID control, allows observation of set and actual temperature simultaneously Featuring a broad range of accessory flask clips and racks ensures flexibility for routine and specialised work.

Accessory Clips and Racks can be mounted onto perforated tray which fits onto reciprocating stainless steel trolley. Flasks, micro titre plates and test-tube racks can easily be loaded and unloaded, lifting out the complete shelf. The trolley can also easily be removed for cleaning.

Features an automatic tuning option allowing the bath to learn about your applications, environment and temperatures. Heaters and temperature sensor concealed under the tank providing a clutter free working area easy to wipe clean. The heating footprint covers underside base of the tank, its low mass provides rapid energy transfer; quicker heat up times and a reduction in energy consumption with improved temperature uniformity.

Shaking system is quiet in use and by removing the trolley it can be used as a standard laboratory bath.

The shaker trolley is highly stable in use, with a removable perforated shelf, unlike many traditional shaker baths where the whole shaker carriage has to be removed for loading and unloading. Clifton Shaker baths just require the perforated shelf, accessory clips and any installed glassware or consumables, to be removed making it lighter and easier to handle.

Uniquely Clifton Shaker baths features a useful stainless steel recessed tray for standing flasks on prior to and after immersion.

Comprising of a high quality corrosion resistant stainless steel tank, with a bright clean finish housed in a durable paint finished outer case. Painted surfaces feature anti-bacterial finish, hygienic coating which actively inhibits bacterial growth, with good chemical resistance.

Controls
Temperature controls feature bold LED display of measured temperatures in real-time, increments of ±0.1°C, using precision PID temperature control. Settings retained even after turning the unit off.

Easy to use splash proof controls, touch keypads for setting temperature values with indicators for heating and over temperature alarm.

Features auto setting over and under temperature alarm protecting your work at set temperature. Every unit undergoes a factory temperature calibration for validation.

Shaking control, analogue dial pointer, graduated in 100rpm divisions from 0 to 400rpm. Stroke length 20mm.
Safety Features
Thermal cut out fitted in the heater. Bath fitted with non-slip rubber feet.

The under/over temperature alarm is automatically set 4˚C above and 4˚C below set temperature. When in alarm condition the indicator illuminates and actual bath temperature is shown, if bath is over temperature heating is switched off. Once liquid temperature has fallen or risen above/below the alarm setting the indicator clears and actual bath temperature is shown, control resumes.
Heat-up Times
  • 12 mins
  • 25 mins
  • 59 mins
Heating/Cooling Information
Above 60°C it is recommended that to achieve optimum performance the bath should be covered with a Lid or layer of polypropylene spheres - see accessories.

Covering the bath with a lid reduces energy consumption and running costs.
Power Consumption (220-240V)
850W
Energy Consumption
0.33kWh @ 37°C
0.34kWh @ 60°C - lid fitted

The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and measured consumption at set point. Please remember that the energy consumption may vary due to factors such as its location, ventilation, ambient temperatures and loading.
Warranty Period
3 Years
Notes
Guide typical applications: routine laboratory work, incubations, bio applications, bacterial cultures, hybridization, tissue cultures.
Features and Benefits
1. The reciprocating trolley accepts a wide number of accessory universal flask clips, which can be made up in any number of specific ways for your applications e.g. flask clips, test tube racks, micro titre trays. 2. Shaking Clifton water bath designed for immersion of flasks/bottles/racks in a highly stable temperature environment throughout the water bath. 3. The trolley can be easily removed and cleaned. 4. Quiet running shaker mechanism and drive motor. 5. Bold temperature control panel ensuring set and actual water temperature can be easily seen. 6. Three-year warranty and comprehensive customer support. 7. Before leaving our factory each water bath has a unique serial number, electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book. 8. To verify the performance of the temperature control system every unit undergoes a factory calibration adjusting control to known traceable values. 9. Painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by many clinical and laboratory environments. These hygienic surfaces are part of a controlled approach to cleaner facilities. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfection’s. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the finishes.

Stainless Steel Gable Lid to fit 8 and 10 Litre Unstirred and Shaking Water Baths

Clifton® Stainless steel Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use

Hinged Gable Lid to suit 8 and 10 Litre Unstirred and Shaking Water Baths

Using conventional lift off lids when removed from a water bath, condensation runs all over your bench top, a mess to clean up. Where do you put the lid once removed?

Hinged lids have a number of benefits in use over lift off lids. They simply hinge open 90° and stay open and any condensation collects in the lid, samples/work can be easily removed or placed in water bath. Close the lid and all the collected condensation runs into rear of the water bath. No mess. The hinge lid can be removed easily and quickly for cleaning or access.

Lift Off Gable Lid to suit 8 and 10 Litre Unstirred and Shaking Water baths

Clifton® clear Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use

25ml Flask Clip

For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D and NE5-28) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.

Easy to assemble and remove Flask Clips from Perforated tray.

Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.

50ml Flask Clip

For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D and NE5-28) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.

Easy to assemble and remove Flask Clips from Perforated tray.

Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.

100ml Flask Clip

For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D and NE5-28) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.

Easy to assemble and remove Flask Clips from Perforated tray.

Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.

250ml Flask Clip

For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D and NE5-28) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.

Easy to assemble and remove Flask Clips from Perforated tray.

Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.

500ml Flask Clip

For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D and NE5-28) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.

Easy to assemble and remove Flask Clips from Perforated tray.

Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.

1000ml Flask Clip

For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D and NE5-28) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.

Easy to assemble and remove Flask Clips from Perforated tray.

Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.

2000ml Flask Clip

For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D and NE5-28) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.

Easy to assemble and remove Flask Clips from Perforated tray.

Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.

Microtitre plate clip for deep or shallow well microplates

This Micro-titre clip is designed to accommodate deep or shallow well micro-plates.

Supplied with all necessary fixings to enable the clip to be attached to the Perforated tray SBF01804 (NE5-28D and NE5-28) or SA01773 (NE5-10D). Micro titre plates easily slide into the clip and yet remain secure during shaking/mixing. Clip and or Tray can be autoclaved.

Stainless Steel Perforated Tray - 10 litre shaking water baths

Perforated tray provides a platform for Flask Clips and can be autoclaved.

Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Draining Syphon

Allows the easy and quick emptying of water baths, immerse into water bath, squeeze the bellow and point the outlet to a bucket or sink.

Thermometer Clip Complete With Bent Stem Spirit Filled Thermometer

Used as a reference to measure actual water temperature of the water bath. Thermometer range 0° to 100°C graduated in 2°C divisions.

Calibration Record

Where equipment requires a Calibration record please order when buying equipment from Clifton® range.

NE5-28D

28 Litre Digital Shaking Water Bath

« Return to Water Baths Shakers

Dimensions
External: 715w x 332d x 290h mm
Internal: 500w x 300d x 200h mm
Perforated shelf/trolley size: 376w x 276d mm
Maximum water level: 120mm above perforated shelf/trolley
Minimum water level: 50mm above perforated shelf/trolley
Packed: 80 x 43 x 33 cm
Capacity
Nominal Tank Capacity: 28 Litres
Temperature control
PID Digital, LED display showing actual and set temperature, resolution 0.1°C
Temperature Range
Ambient + 5°C - 99°C
Temperature alarm
Under/over temperature alarm is automatically set 4˚C above and 4˚C below set point.
Sensitivity
±0.1°C @ 45°C optimal water level 75 to 120mm
Uniformity
±0.1°C @ 45°C optimal water level 75 to 120mm
Heater Power (220-240V)
1000W
Linear shaking control
Shaking control from 0 to 400rpm stroke length variable up to 40mm
Drain
Drain outlet fitted, large 12mm bore for fast emptying. An accessory tap can be added for convenience.
Voltage
230V 50-60Hz
Packed Weight
22.5 kg
Product Code
NE5-28D
Description
Clifton® Shaking water bath, featuring precision PID control, allows observation of set and actual temperature simultaneously Featuring a broad range of accessory trays, flask clips and racks ensures flexibility for routine and specialised work.

Accessory Clips and Racks can be mounted onto an accessory perforated shelf which fits onto reciprocating stainless steel trolley. Flasks, micro titre plates and test-tube racks can easily be loaded and unloaded, lifting out the complete shelf. The trolley can also easily be removed for cleaning.

Features an automatic tuning option allowing the bath to learn about your applications, environment and temperatures. Highly accurate PT100 sensor immersed directly in the bath.

Shaking system is quiet in use and by removing the trolley it can be used as a standard laboratory bath.

The shaker trolley is highly stable in use, with a removable perforated shelf, unlike many traditional shaker baths where the whole shaker carriage has to be removed for loading and unloading. Clifton Shaker baths just require the perforated shelf, accessory clips and any installed glassware or consumables, to be removed making it lighter and easier to handle.

Uniquely Clifton Shaker baths features a useful stainless steel recessed tray for standing flasks on prior to and after immersion.

Comprising of a high quality corrosion resistant stainless steel tank, with a bright clean finish housed in a durable paint finished outer case. Painted surfaces feature anti-bacterial finish, hygienic coating which actively inhibits bacterial growth, with good chemical resistance.

Heaters are concealed under the tank providing a clutter free working area easy to wipe clean. The heating footprint covers underside base of the tank, its low mass provides rapid energy transfer; quicker heat up times and a reduction in energy consumption with improved temperature uniformity.
Controls
Temperature controls feature bold LED display of measured temperatures in real-time, increments of ±0.1°C, using precision PID temperature control. Settings retained even after turning the unit off.

Easy to use splash proof controls, touch keypads for setting temperature values with indicators for heating and over temperature alarm.

Features auto setting over and under temperature alarm protecting your work at set temperature.

Every unit undergoes a factory temperature calibration for validation.

Shaking control, analogue dial pointer, graduated in 100rpm divisions from 0 to 400rpm. Stroke length variable up to 40mm.
Safety Features
Thermal cut out fitted in the heater. Bath fitted with non-slip rubber feet.

The under/over temperature alarm is automatically set 4˚C above and 4˚C below set temperature. When in alarm condition the indicator illuminates and actual bath temperature is shown, if bath is over temperature heating is switched off. Once liquid temperature has fallen or risen above/below the alarm setting the indicator clears and actual bath temperature is shown, control resumes.
Heat-up Times
  • 22 mins
  • 30 mins
  • 60 mins
Heating/Cooling Information
Above 60°C it is recommended that to achieve optimum performance the bath should be covered with a Lid or layer of polypropylene spheres - see accessories.

Covering the bath with a lid reduces energy consumption and running costs.
Power Consumption (220-240V)
1050W
Energy Consumption
0.55kWh @ 37°C
0.55kWh @ 60°C - lid fitted

The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and measured consumption at set point. Please remember that the energy consumption may vary due to factors such as its location, ventilation, ambient temperatures and loading.
Warranty Period
3 Years
Notes
Guide typical applications: routine laboratory work, incubations, bio applications, bacterial cultures, hybridization, tissue cultures.
Features and Benefits
1. The reciprocating trolley accepts a wide number of accessory universal flask clip trays, which can be made up in any number of specific ways for your applications e.g. flask clips, test tube racks, micro titre trays. 2. Shaking Clifton water bath designed for immersion of flasks/bottles/racks in a highly stable temperature environment throughout the water bath. 3. The trolley and universal flask tray can be easily removed and cleaned. 4. Quiet running shaker mechanism and drive motor. 5. Bold temperature control panel ensuring set and actual water temperature can be easily seen. 6. Three-year warranty and comprehensive customer support. 7. Before leaving our factory each water bath has a unique serial number, electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book. 8. To verify the performance of the temperature control system every unit undergoes a factory calibration adjusting control to known traceable values. 9. Painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by many clinical and laboratory environments. These hygienic surfaces are part of a controlled approach to cleaner facilities. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfection’s. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the finishes.

Stainless Steel Gable Lid to fit 22 and 28 Litre Unstirred and Shaking Water Baths

Clifton® Stainless steel Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use

Stainless Steel Hinged Gable Lid to fit 22 and 28 Litre Unstirred and Shaking Water Baths

Clifton® Stainless steel hinged Gable Lids reduces evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile design allows extended use of the bath, right into the edges of the tank. No drip points and condensate returns back into the bath.

Hinged lids have a number of benefits in use over lift off lids, these simply hinge open, any condensation collects in the lid, samples can be easily removed or placed in water bath. Close the lid and all the collected condensation runs into rear of the water bath. No mess.

Hinged Gable Lid to suit 22 and 28 Litre Unstirred and Shaking Water Baths

Using conventional lift off lids when removed from a water bath, condensation runs all over your bench top, a mess to clean up. Where do you put the lid once removed?

Hinged lids have a number of benefits in use over lift off lids. They simply hinge open 90° and stay open and any condensation collects in the lid, samples/work can be easily removed or placed in water bath. Close the lid and all the collected condensation runs into rear of the water bath. No mess. The hinge lid can be removed easily and quickly for cleaning or access.

Lift Off Gable Lid to suit 9, 22 and 28 Litre Unstirred and Shaking Water Baths

Clifton® clear Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use

39 x 25ml Flask Clip Tray

A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.

The NE5-28 and NE5-28D are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.

32 x 50ml Flask Clip Tray

A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.

The NE5-28 and NE5-28D are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.

18 x 100ml Flask Clip Tray

A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.

The NE5-28 and NE5-28D are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.

12 x 250ml Flask Clip Tray

A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.

The NE5-28 and NE5-28D are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.

8 x 500ml Flask Clip Tray

A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.

The NE5-28 and NE5-28D are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.

5 x 1000ml Flask Clip Tray

A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.

The NE5-28 and NE5-28D are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.

2 x 2000ml Flask Clip Tray

A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.

The NE5-28 and NE5-28D are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.

Stainless Steel Universal Spring Tray to fit 28 Litre Bath

Universal Spring Clip Tray a multi-spring tray for accommodating a variety of flasks and bottle types, even different sizes. Featuring a criss cross pattern of springs flasks and bottles can be easily inserted and removed.

The NE5-28 and NE5-28D are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.

Stainless Steel Test Tube Rack Tray to fit 28 Litre Bath

For the NE5-28 and NE5-28D a Test tube rack Tray with side clips allows up to 4 test tube racks to be fitted. The tray simply drops onto the reciprocating trolley and locates snugly.

25ml Flask Clip

For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D and NE5-28) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.

Easy to assemble and remove Flask Clips from Perforated tray.

Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.

50ml Flask Clip

For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D and NE5-28) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.

Easy to assemble and remove Flask Clips from Perforated tray.

Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.

100ml Flask Clip

For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D and NE5-28) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.

Easy to assemble and remove Flask Clips from Perforated tray.

Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.

250ml Flask Clip

For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D and NE5-28) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.

Easy to assemble and remove Flask Clips from Perforated tray.

Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.

500ml Flask Clip

For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D and NE5-28) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.

Easy to assemble and remove Flask Clips from Perforated tray.

Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.

1000ml Flask Clip

For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D and NE5-28) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.

Easy to assemble and remove Flask Clips from Perforated tray.

Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.

2000ml Flask Clip

For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D and NE5-28) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.

Easy to assemble and remove Flask Clips from Perforated tray.

Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.

2.8L Fernbach Flask Clip - single

For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804. It is possible to mix and match a variety of clips sizes to suit different applications.

Easy to assemble and remove Flask Clips from Perforated tray.

Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.

Stainless Steel Perforated Tray - 28 litre shaking water baths

Perforated tray provides a platform for accessories such as Flask Clips and Test tube racks. The Tray can be autoclaved.

Microtitre plate clip for deep or shallow well microplates

This Micro-titre clip is designed to accommodate deep or shallow well micro-plates.

Supplied with all necessary fixings to enable the clip to be attached to the Perforated tray SBF01804 (NE5-28D and NE5-28) or SA01773 (NE5-10D). Micro titre plates easily slide into the clip and yet remain secure during shaking/mixing. Clip and or Tray can be autoclaved.

Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Polypropylene Spheres

This blanket of hollow spheres is ideal for open tanks of water. Reduces thermal losses - Savings of up to 75% can be achieved with a single layer - Increase energy saving & reducing costs. A single layer of spheres covers 91% of the liquid surface trapping air in the gaps which adds to the thermal insulation properties. Reduces steaming - vapour losses reduced by 90%. Reduce vapours & splashing. No impedance to workload.

Drain Tap - for Water baths with serial numbers upto 75100

1. Providing a gated on/off valve to empty fluids conveniently from the bath.

2. Nozzle supplied with tap for laboratory tubing.

Drain Tap - for Water baths with serial numbers greater than 75100

1. Providing a gated on/off valve to empty fluids conveniently from the bath.

2. Nozzle supplied with tap for laboratory tubing.

Thermometer Clip Complete With Bent Stem Spirit Filled Thermometer

Used as a reference to measure actual water temperature of the water bath. Thermometer range 0° to 100°C graduated in 2°C divisions.

Calibration Record

Where equipment requires a Calibration record please order when buying equipment from Clifton® range.

NE5-28

28 Litre Analogue Shaking Water Bath

« Return to Water Baths Shakers

Dimensions
External: 715w x 332d x 290h mm
Internal: 500w x 298d x 200h mm
Perforated shelf/trolley size: 376w x 276d mm
Maximum water level: 120mm above perforated shelf/trolley
Minimum water level: 50mm above perforated shelf/trolley
Packed: 80 x 43 x 33 cm
Capacity
Nominal Tank Capacity: 28 Litres
Temperature control
Electronic temperature control, analogue dial pointer graduated in 5°C divisions
Temperature Range
Ambient + 5°C - 99°C
Sensitivity
±0.2°C @ 45°C optimal water level 75 to 120mm
Uniformity
±0.1°C @ 45°C optimal water level 75 to 120mm
Heater Power (220-240V)
1000W
Linear shaking control
Shaking control from 0 to 380rpm stroke length variable up to 40mm
Drain
Drain outlet fitted, large 12mm bore for fast emptying. An accessory tap can be added for convenience.
Voltage
230V 50-60Hz
Packed Weight
22.5 kg
Product Code
NE5-28
Description
Clifton® Shaking water bath, featuring analogue temperature and shaking speed control available with a broad range of accessory trays, flask clips and racks ensures flexibility for routine and specialised incubations.

Accessory Clips and Racks can be mounted onto an accessory perforated shelf which fits onto reciprocating stainless steel trolley. Flasks, micro titre plates and test-tube racks can easily be loaded and unloaded, lifting out the complete shelf. The trolley can also easily be removed for cleaning.

Shaking system is quiet in use and by removing the trolley it can be used as a standard laboratory bath.

The shaker trolley is highly stable in use, with a removable perforated shelf, unlike many traditional shaker baths where the whole shaker carriage has to be removed for loading and unloading. Clifton Shaker baths just require the perforated shelf, accessory clips and any installed glassware or consumables, to be removed making it lighter and easier to handle.

Uniquely Clifton Shaker baths features a useful stainless steel recessed tray for standing flasks on prior to and after immersion.

Comprising of a high quality corrosion resistant stainless steel tank, with a bright clean finish housed in a durable paint finished outer case. Painted surfaces feature anti-bacterial finish, hygienic coating which actively inhibits bacterial growth, with good chemical resistance.

Heaters are concealed under the tank providing a clutter free working area easy to wipe clean. The heating footprint covers underside base of the tank, its low mass provides rapid energy transfer; quicker heat up times and a reduction in energy consumption with improved temperature uniformity.

Controls
Analogue temperature control. Every unit undergoes a factory temperature calibration for validation. Shaking control, analogue dial pointer, from 0 to 380rpm. Stroke length variable up to 40mm.
Safety Features
'Experiment protector', an adjustable over temperature device can be set a few degrees above the set working temperature, protecting your work/sampling from overheating/damage.

Thermal cut out fitted in the heater. Bath fitted with non-slip rubber feet.

Heat-up Times
  • 10 mins
  • 15 mins
  • 25 mins
  • 40 mins
Heating/Cooling Information
Above 60°C it is recommended that to achieve optimum performance the bath should be covered with a Lid or layer of polypropylene spheres - see accessories.

Covering the bath with a lid reduces energy consumption and running costs.
Power Consumption (220-240V)
1050W
Energy Consumption
0.55kWh @ 37°C
0.55kWh @ 60°C - lid fitted

The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and measured consumption at set point. Please remember that the energy consumption may vary due to factors such as its location, ventilation, ambient temperatures and loading.
Warranty Period
3 Years
Notes
Guide typical applications: routine laboratory work, incubations, bio applications, bacterial cultures, hybridization, tissue cultures.
Features and Benefits
1. The reciprocating trolley accepts a wide number of accessory universal flask clip trays, which can be made up in any number of specific ways for your applications e.g. flask clips, test tube racks, micro titre trays. 2. Shaking Clifton water bath designed for immersion of flasks/bottles/racks in a highly stable temperature environment throughout the water bath. 3. The trolley and universal flask tray can be easily removed and cleaned. 4. Quiet running shaker mechanism and drive motor. 5. Three-year warranty and comprehensive customer support. 6. Before leaving our factory each water bath has a unique serial number, electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book. 7. To verify the performance of the temperature control system every unit undergoes a factory calibration adjusting control to known traceable values. 8. Painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by many clinical and laboratory environments. These hygienic surfaces are part of a controlled approach to cleaner facilities. The Clifton range features easy to clean surfaces and finishes that are resistant to routine and efficient disinfection’s. The efficacy of the finish is maintained over time, as the anti-bacterial agent is integral within the finishes.

Stainless Steel Gable Lid to fit 22 and 28 Litre Unstirred and Shaking Water Baths

Clifton® Stainless steel Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use

Stainless Steel Hinged Gable Lid to fit 22 and 28 Litre Unstirred and Shaking Water Baths

Clifton® Stainless steel hinged Gable Lids reduces evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These stainless steel gable lids with a high profile design allows extended use of the bath, right into the edges of the tank. No drip points and condensate returns back into the bath.

Hinged lids have a number of benefits in use over lift off lids, these simply hinge open, any condensation collects in the lid, samples can be easily removed or placed in water bath. Close the lid and all the collected condensation runs into rear of the water bath. No mess.

Hinged Gable Lid to suit 22 and 28 Litre Unstirred and Shaking Water Baths

Using conventional lift off lids when removed from a water bath, condensation runs all over your bench top, a mess to clean up. Where do you put the lid once removed?

Hinged lids have a number of benefits in use over lift off lids. They simply hinge open 90° and stay open and any condensation collects in the lid, samples/work can be easily removed or placed in water bath. Close the lid and all the collected condensation runs into rear of the water bath. No mess. The hinge lid can be removed easily and quickly for cleaning or access.

Lift Off Gable Lid to suit 9, 22 and 28 Litre Unstirred and Shaking Water Baths

Clifton® clear Gable Lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy. These gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples whilst the lid design ensures all condensate returns back into the bath. Insulated handles for safe use

39 x 25ml Flask Clip Tray

A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.

The NE5-28 and NE5-28D are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.

32 x 50ml Flask Clip Tray

A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.

The NE5-28 and NE5-28D are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.

18 x 100ml Flask Clip Tray

A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.

The NE5-28 and NE5-28D are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.

12 x 250ml Flask Clip Tray

A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.

The NE5-28 and NE5-28D are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.

8 x 500ml Flask Clip Tray

A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.

The NE5-28 and NE5-28D are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.

5 x 1000ml Flask Clip Tray

A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.

The NE5-28 and NE5-28D are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.

2 x 2000ml Flask Clip Tray

A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.

The NE5-28 and NE5-28D are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.

Stainless Steel Universal Spring Tray to fit 28 Litre Bath

Universal Spring Clip Tray a multi-spring tray for accommodating a variety of flasks and bottle types, even different sizes. Featuring a criss cross pattern of springs flasks and bottles can be easily inserted and removed.

The NE5-28 and NE5-28D are supplied with a trolley platform to accommodate universal spring tray, flask clip trays and test tube rack trays.

Stainless Steel Test Tube Rack Tray to fit 28 Litre Bath

For the NE5-28 and NE5-28D a Test tube rack Tray with side clips allows up to 4 test tube racks to be fitted. The tray simply drops onto the reciprocating trolley and locates snugly.

25ml Flask Clip

For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D and NE5-28) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.

Easy to assemble and remove Flask Clips from Perforated tray.

Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.

50ml Flask Clip

For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D and NE5-28) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.

Easy to assemble and remove Flask Clips from Perforated tray.

Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.

100ml Flask Clip

For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D and NE5-28) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.

Easy to assemble and remove Flask Clips from Perforated tray.

Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.

250ml Flask Clip

For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D and NE5-28) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.

Easy to assemble and remove Flask Clips from Perforated tray.

Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.

500ml Flask Clip

For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D and NE5-28) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.

Easy to assemble and remove Flask Clips from Perforated tray.

Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.

1000ml Flask Clip

For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D and NE5-28) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.

Easy to assemble and remove Flask Clips from Perforated tray.

Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.

2000ml Flask Clip

For personalised clip arrangement, clips are supplied with all necessary fixings to enable them to be attached to the Perforated tray SBF01804 (NE5-28D and NE5-28) or SA01773 (NE5-10D). It is possible to mix and match a variety of clips sizes to suit different applications.

Easy to assemble and remove Flask Clips from Perforated tray.

Flask Clips are highly flexible/elastic design, allowing glassware to easily slide into the clip and yet remain secure during shaking/mixing. No sharp edges to cut or score glassware. Can be autoclaved.

Stainless Steel Perforated Tray - 28 litre shaking water baths

Perforated tray provides a platform for accessories such as Flask Clips and Test tube racks. The Tray can be autoclaved.

Microtitre plate clip for deep or shallow well microplates

This Micro-titre clip is designed to accommodate deep or shallow well micro-plates.

Supplied with all necessary fixings to enable the clip to be attached to the Perforated tray SBF01804 (NE5-28D and NE5-28) or SA01773 (NE5-10D). Micro titre plates easily slide into the clip and yet remain secure during shaking/mixing. Clip and or Tray can be autoclaved.

Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter

Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.

Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

Drain Tap - for Water baths with serial numbers upto 75100

1. Providing a gated on/off valve to empty fluids conveniently from the bath.

2. Nozzle supplied with tap for laboratory tubing.

Drain Tap - for Water baths with serial numbers greater than 75100

1. Providing a gated on/off valve to empty fluids conveniently from the bath.

2. Nozzle supplied with tap for laboratory tubing.

Thermometer Clip Complete With Bent Stem Spirit Filled Thermometer

Used as a reference to measure actual water temperature of the water bath. Thermometer range 0° to 100°C graduated in 2°C divisions.

Calibration Record

Where equipment requires a Calibration record please order when buying equipment from Clifton® range.