NE7-ST+ Thermostatic Cabinets

NE7-ST1+

65 Litre Thermostatic Cabinet

« Return to Thermostatic Cabinets

Dimensions
External: 550w x 660d x 600h mm
Internal: 470w x 300d x 430h mm
Packed: 65x65x80 cm
Capacity
65 litre chamber Working capacity of the chamber can be smaller.
Temperature Range
+3°C to 40°C
Sensitivity
±0.2°C @ 37°C Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
Door configuration
Single door Door lockable with a key
Shelves fitted
2 Maximum shelf load 10kg
Shelves max. no.
2
Power consumption
160W
Voltage
230V 50/60Hz
Packed Weight
30kg
Product Code
NE7-ST1+
Description
Clifton® Thermostatic Cabinets provide chamber temperatures settable from 3°C to 40°C, a cost effective alternative to Cooled Incubators.

Thermostatic Cabinets provide a combination of heating and cooling producing a controlled environment with fan circulation for consistent chamber temperature. Featuring bold illuminated LCD display with easy to use touch sensitive controls on a wipe clean surface.

The aluminium lined chamber features a solid hinged lockable door and an access port. Supplied with wire shelves that can be adjusted for height on runners inside the chamber.

Factory calibrated at 37°C and supplied with certificate.
Controls
Featuring bold illuminated LCD graphic display of measured temperatures in real-time, in increments of ±0.1°C, with fan speed status, set temperature, date and time.

Intuitive to use controls, utilising illuminated touch sensitive keypads with display prompts assisting the setting of functions within the unit.

Thermostatic Cabinet can be set to run continuously at set temperature, timed from [00h:01m] up to 30 days or delay start [00h:01m] to [99:59m].

With three available programs and up to 6 segments in each it allows the creation of temperature time profiles of your choice. When a program is running the controls are locked preventing accidental interruption or change however stopping a program is straightforward.

Additional features, defrost function, temperature sensor alarm, power fail alarm and real time clock.
Fan speed
The Fan speed can be set from 0% no air convection within the chamber to 100% for maximum air convection.
Logger
Data logging of temperatures with date and times and an event log records.
Safety Features
Switching on, the controls undergo an automatic diagnostic check.

Features a temperature sensor fail alarm with error reporting on LCD screen.

Power failure control with auto resume and event recording.

Setting of High and Low temperature Alarm, settable 0 – 5°C about set temperature.

Door opening generates an audible beep and indication on LCD display. When a program is running and should the door be left open a Door Alarm occurs, illuminating a red warning indicator and audible beeping until closed.

Safety Class
Fitted with Class 1 for overall unit protection.
Warranty
3 Years
Notes
  • Before ordering please check the room or building access where this unit will be installed and electrical power requirements.
  • Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
  • Working capacity of chamber may be smaller.
  • Do not place in direct sunlight or near a heat or cold source.
  • Allow a 100mm air gap away from wall at rear. Ensure there is a minimum 300mm air gap from top of the unit to ceiling.

Exterior glass door for 65 litre thermostatic cabinet

Visual access in to chamber without opening the door.

Additional interior glass door, for 65 litre thermostatic cabinets

1. Retains temperature in the chamber once solid door is opened allowing viewing. 2. Hinges open for access. 3. Toughened glass.

Internal power socket for Fan Assisted s range only

This factory fit accessory provides a UK 3pin 230V power supply inside the chamber of S series Clifton Incubator for powering Mixers or lighting.

Automatic Defrost

Frost free chamber.

NE7-ST2+

150 Litre Thermostatic Cabinet

« Return to Thermostatic Cabinets

Dimensions
External: 600w x 610d x 850h mm
Internal: 520w x 420d x 660h mm
Packed: 65x65x105 cm
Capacity
150 litre chamber Working capacity of the chamber can be smaller.
Temperature Range
+3°C to 40°C
Sensitivity
±0.2°C @ 37°C Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
Door configuration
Single door Door lockable with a key
Shelves fitted
3 Maximum shelf load 10kg
Shelves max. no.
4
Power consumption
170W
Voltage
230V 50/60Hz
Packed Weight
48 kg
Product Code
NE7-ST2+
Description
Clifton® Thermostatic Cabinets provide chamber temperatures settable from 3°C to 40°C, a cost effective alternative to Cooled Incubators.

Thermostatic Cabinets provide a combination of heating and cooling producing a controlled environment with fan circulation for consistent chamber temperature. Featuring bold illuminated LCD display with easy to use touch sensitive controls on a wipe clean surface.

The aluminium lined chamber features a solid hinged lockable door and an access port. Supplied with wire shelves that can be adjusted for height on runners inside the chamber.

Factory calibrated at 37°C and supplied with certificate.
Controls
Featuring bold illuminated LCD graphic display of measured temperatures in real-time, in increments of ±0.1°C, with fan speed status, set temperature, date and time.

Intuitive to use controls, utilising illuminated touch sensitive keypads with display prompts assisting the setting of functions within the unit.

Thermostatic Cabinet can be set to run continuously at set temperature, timed from [00h:01m] up to 30 days or delay start [00h:01m] to [99:59m].

With three available programs and up to 6 segments in each it allows the creation of temperature time profiles of your choice. When a program is running the controls are locked preventing accidental interruption or change however stopping a program is straightforward.

Additional features, defrost function, temperature sensor alarm, power fail alarm and real time clock.
Fan speed
The Fan speed can be set from 0% no air convection within the chamber to 100%.
Logger
Data logging of temperatures with date and times and an event log records.
Safety Features
Switching on, the controls undergo an automatic diagnostic check.

Features a temperature sensor fail alarm with error reporting on LCD screen.

Power failure control with auto resume and event recording.

Setting of High and Low temperature Alarm, settable 0 – 5°C about set temperature.

Door opening generates an audible beep and indication on LCD display. When a program is running and should the door be left open a Door Alarm occurs, illuminating a red warning indicator and audible beeping until closed.
Safety Class
Fitted with Class 1 for overall unit protection.
Warranty
3 Years
Notes
  • Before ordering please check the room or building access where this unit will be installed and electrical power requirements.
  • Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
  • Working capacity of chamber may be smaller.
  • Do not place in direct sunlight or near a heat or cold source.
  • Allow a 100mm air gap away from wall at rear. Ensure there is a minimum 300mm air gap from top of the unit to ceiling.

Exterior glass door for 150 litre thermostatic cabinet

Visual access in to chamber without opening the door.

Additional interior glass door, for 150 litre thermostatic cabinets

Retains temperature in the chamber once solid door is opened allowing viewing. Hinges open for access. Toughened glass.

Internal power socket for Fan Assisted s range only

This factory fit accessory provides a UK 3pin 230V power supply inside the chamber of S series Clifton Incubator for powering Mixers or lighting.

Automatic Defrost

Frost free chamber.

NE7-ST3+

200 Litre Thermostatic Cabinet

« Return to Thermostatic Cabinets

Dimensions
External: 600w 610d x 1050h mm
Internal: 520w x 420d x 860h mm
Packed: xx x xx x xx cm
Capacity
200 litre chamber Working capacity of the chamber can be smaller.
Temperature Range
+3°C to 40°C
Sensitivity
±0.3°C @ 37°C Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
Door configuration
Single door Door lockable with a key
Shelves fitted
3 Maximum shelf load 10kg
Shelves max. no.
4
Power consumption
170W
Voltage
230V 50/60Hz
Packed Weight
52 kg
Product Code
NE7-ST3+
Description
Clifton® Thermostatic Cabinets provide chamber temperatures settable from 3°C to 40°C, a cost effective alternative to Cooled Incubators.

Thermostatic Cabinets provide a combination of heating and cooling producing a controlled environment with fan circulation for consistent chamber temperature. Featuring bold illuminated LCD display with easy to use touch sensitive controls on a wipe clean surface.

The aluminium lined chamber features a solid hinged lockable door and an access port. Supplied with wire shelves that can be adjusted for height on runners inside the chamber.

Factory calibrated at 37°C and supplied with certificate.
Controls
Featuring bold illuminated LCD graphic display of measured temperatures in real-time, in increments of ±0.1°C, with fan speed status, set temperature, date and time.

Intuitive to use controls, utilising illuminated touch sensitive keypads with display prompts assisting the setting of functions within the unit.

Thermostatic Cabinet can be set to run continuously at set temperature, timed from [00h:01m] up to 30 days or delay start [00h:01m] to [99:59m].

With three available programs and up to 6 segments in each it allows the creation of temperature time profiles of your choice. When a program is running the controls are locked preventing accidental interruption or change however stopping a program is straightforward.

Additional features, defrost function, temperature sensor alarm, power fail alarm and real time clock.
Fan speed
The Fan speed can be set from 0% no air convection within the chamber to 100%.
Logger
Data
Safety Features
Switching on, the controls undergo an automatic diagnostic check.

Features a temperature sensor fail alarm with error reporting on LCD screen.

Power failure control with auto resume and event recording.

Setting of High and Low temperature Alarm, settable 0 – 5°C about set temperature.

Door opening generates an audible beep and indication on LCD display. When a program is running and should the door be left open a Door Alarm occurs, illuminating a red warning indicator and audible beeping until closed.
Safety Class
Fitted with Class 1 for overall unit protection.
Warranty
3 Years
Notes
  • Before ordering please check the room or building access where this unit will be installed and electrical power requirements.
  • Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
  • Working capacity of chamber may be smaller.
  • Do not place in direct sunlight or near a heat or cold source.
  • Allow a 100mm air gap away from wall at rear. Ensure there is a minimum 300mm air gap from top of the unit to ceiling.

Additional interior glass door, for 200 litre thermostatic cabinets

Retains temperature in the chamber once solid door is opened allowing viewing. Hinges open for access. Toughened glass.

Exterior glass door for 200 litre thermostatic cabinet

Visual access in to chamber without opening the door.

Internal power socket for Fan Assisted s range only

This factory fit accessory provides a UK 3pin 230V power supply inside the chamber of S series Clifton Incubator for powering Mixers or lighting.

Automatic Defrost

Frost free chamber.

NE7-ST4+

250 Litre Thermostatic Cabinet

« Return to Thermostatic Cabinets

Dimensions
External: 600w x 610d x 1250h mm
Internal: 520w x 420d x 1060h mm
Packed: xx x xx x xx cm
Capacity
250 litre chamber Working capacity of the chamber can be smaller.
Temperature Range
+3°C to 40°C
Sensitivity
±0.3°C @ 37°C Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
Door configuration
Single door Door lockable with a key
Shelves fitted
4 Maximum shelf load 10kg
Shelves max. no.
6
Power consumption
330W
Voltage
230V 50/60Hz
Packed Weight
61kg
Product Code
NE7-ST4+
Description
Clifton® Thermostatic Cabinets provide chamber temperatures settable from 3°C to 40°C, a cost effective alternative to Cooled Incubators.

Thermostatic Cabinets provide a combination of heating and cooling producing a controlled environment with fan circulation for consistent chamber temperature. Featuring bold illuminated LCD display with easy to use touch sensitive controls on a wipe clean surface.

The aluminium lined chamber features a solid hinged lockable door and an access port. Supplied with wire shelves that can be adjusted for height on runners inside the chamber.

Factory calibrated at 37°C and supplied with certificate.
Controls
Featuring bold illuminated LCD graphic display of measured temperatures in real-time, in increments of ±0.1°C, with fan speed status, set temperature, date and time.

Intuitive to use controls, utilising illuminated touch sensitive keypads with display prompts assisting the setting of functions within the unit.

Thermostatic Cabinet can be set to run continuously at set temperature, timed from [00h:01m] up to 30 days or delay start [00h:01m] to [99:59m].

With three available programs and up to 6 segments in each it allows the creation of temperature time profiles of your choice. When a program is running the controls are locked preventing accidental interruption or change however stopping a program is straightforward.

Additional features, defrost function, temperature sensor alarm, power fail alarm and real time clock.
Fan speed
The Fan speed can be set from 0% no air convection within the chamber to 100%.
Logger
Data logging of temperatures with date and times and an event log records.
Safety Features
Switching on, the controls undergo an automatic diagnostic check.

Features a temperature sensor fail alarm with error reporting on LCD screen.

Power failure control with auto resume and event recording.

Setting of High and Low temperature Alarm, settable 0 – 5°C about set temperature.

Door opening generates an audible beep and indication on LCD display. When a program is running and should the door be left open a Door Alarm occurs, illuminating a red warning indicator and audible beeping until closed.
Safety Class
Fitted with Class 1 for overall unit protection.
Warranty
3 Years
Notes
  • Before ordering please check the room or building access where this unit will be installed and electrical power requirements.
  • Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
  • Working capacity of chamber may be smaller.
  • Do not place in direct sunlight or near a heat or cold source.
  • Allow a 100mm air gap away from wall at rear. Ensure there is a minimum 300mm air gap from top of the unit to ceiling.

Additional interior glass door, for 250 litre thermostatic cabinets

Retains temperature in the chamber once solid door is opened allowing viewing. Hinges open for access. Toughened glass.

Exterior glass door for 250 litre thermostatic cabinet

Visual access in to chamber without opening the door.

Internal power socket for Fan Assisted s range only

This factory fit accessory provides a UK 3pin 230V power supply inside the chamber of S series Clifton Incubator for powering Mixers or lighting.

Automatic Defrost

Frost free chamber.

NE7-ST5+

300 Litre Thermostatic Cabinet

« Return to Thermostatic Cabinets

Dimensions
External: 600w x 610d x 1450h mm
Internal: 520w x 420d x 1260h mm
Packed: xx x xx x xx cm
Capacity
300 litre chamber Working capacity of the chamber can be smaller.
Temperature Range
+3°C to 40°C
Sensitivity
±0.3°C @ 37°C Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
Door configuration
Single door Door lockable with a key
Shelves fitted
4 Maximum shelf load 10kg
Shelves max. no.
7
Power consumption
330W
Voltage
230V 50/60Hz
Packed Weight
66kg
Product Code
NE7-ST5+
Description
Clifton® Thermostatic Cabinets provide chamber temperatures settable from 3°C to 40°C, a cost effective alternative to Cooled Incubators.

Thermostatic Cabinets provide a combination of heating and cooling producing a controlled environment with fan circulation for consistent chamber temperature. Featuring bold illuminated LCD display with easy to use touch sensitive controls on a wipe clean surface.

The aluminium lined chamber features a solid hinged lockable door and an access port. Supplied with wire shelves that can be adjusted for height on runners inside the chamber.

Factory calibrated at 37°C and supplied with certificate.
Controls
Featuring bold illuminated LCD graphic display of measured temperatures in real-time, in increments of ±0.1°C, with fan speed status, set temperature, date and time.

Intuitive to use controls, utilising illuminated touch sensitive keypads with display prompts assisting the setting of functions within the unit.

Thermostatic Cabinet can be set to run continuously at set temperature, timed from [00h:01m] up to 30 days or delay start [00h:01m] to [99:59m].

With three available programs and up to 6 segments in each it allows the creation of temperature time profiles of your choice. When a program is running the controls are locked preventing accidental interruption or change however stopping a program is straightforward.

Additional features, defrost function, temperature sensor alarm, power fail alarm and real time clock.
Fan speed
The Fan speed can be set from 0% no air convection within the chamber to 100%.
Logger
Data logging of temperatures with date and times and an event log records.
Safety Features
Switching on, the controls undergo an automatic diagnostic check.

Features a temperature sensor fail alarm with error reporting on LCD screen.

Power failure control with auto resume and event recording.

Setting of High and Low temperature Alarm, settable 0 – 5°C about set temperature.

Door opening generates an audible beep and indication on LCD display. When a program is running and should the door be left open a Door Alarm occurs, illuminating a red warning indicator and audible beeping until closed.
Safety Class
Fitted with Class 1 for overall unit protection.
Warranty
3 Years
Notes
  • Before ordering please check the room or building access where this unit will be installed and electrical power requirements.
  • Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
  • Working capacity of chamber may be smaller.
  • Do not place in direct sunlight or near a heat or cold source.
  • Allow a 100mm air gap away from wall at rear. Ensure there is a minimum 300mm air gap from top of the unit to ceiling.

Additional interior glass door, for 300 litre thermostatic cabinets

Retains temperature in the chamber once solid door is opened allowing viewing. Hinges open for access. Toughened glass.

Exterior glass door for 300 litre thermostatic cabinet

Visual access in to chamber without opening the door.

Internal power socket for Fan Assisted s range only

This factory fit accessory provides a UK 3pin 230V power supply inside the chamber of S series Clifton Incubator for powering Mixers or lighting.

Automatic Defrost

Frost free chamber.