Nickel-Electro ltd.

CH-1E

These popular Clifton® sized ceramic hotplate stirrers are designed for general laboratory requirements and are available in three styles - Cerastir CH-1 series - analogue, Cerastir CHS-1 series - digital or the larger Cerastir CHS-2.

Using a ceramic glass heating surface resistant to most chemicals, the plate can be precisely controlled, spillages are directed away from the controls and user. Smooth start up and changes in stirring speed ensure that the follower increases or decreases its mixing speed without detaching.

• 
  
• Easy clean ceramic top and chemical resistant
• 
  
• Rapid warm up times
• 
  
• Over temperature protection
• 
  
• Smooth start stirring up to maximum speed 1500rpm
• 
  
• Maximum stirring volume 15 litres
• 
  
• Economically priced, robust design
• 
  
• Spill proof design, IP32
• 
  
• Fixings for retort rod/scaffolding
• 
  
• 2 PTFE coated stirring bars are supplied
• 
  

Hot warning indicator when the hob temperature is above 50°C, even when the hob is turned off. Spill proof design, IP32 with thermal over temperature protection.

550W

3 Years

1. This unit is ONLY SUITABLE for 230V 50Hz supply.

2. The hotplate must not be used to heat materials or containers which have high reflective or insulating properties. Sand baths and silver foil must not be used. If heat is not allowed to escape from the heated surface, over heating will cause failure.

CH-1A

These popular sized ceramic hotplate stirrers are designed for general laboratory requirements and are available in three styles - Cerastir CH-1 series - analogue, Cerastir CHS-1 series - digital or the larger Cerastir CHS-2.

Using a ceramic glass heating surface resistant to most chemicals, the plate can be precisely controlled, spillages are directed away from the controls and user. Smooth start up and changes in stirring speed ensure that the follower increases or decreases its mixing speed without
detaching.

• 
  
• Easy clean ceramic top and chemical resistant
• 
  
• Rapid warm up times
• 
  
• Over temperature protection
• 
  
• Smooth start stirring up to maximum speed 1500rpm
• 
  
• Maximum stirring volume 15 litres
• 
  
• Economically priced, robust design
• 
  
• Spill proof design, IP32
• 
  
• Fixings for retort rod/scaffolding
• 
  
• 2 PTFE coated stirring bars are supplied
• 
  
• "Hot" warning indicator will flash when hob temperature is above 50 degrees C, even when hob is turned off

Hot warning indicator when the hob temperature is above 50°C, even when the hob is turned off. Spill proof design, IP32 with thermal over temperature protection.

3 Years

1. This unit is ONLY SUITABLE for 120V 60Hz supply.

2. The hotplate must not be used to heat materials or containers which have high reflective or insulating properties. Sand baths and silver foil must not be used. If heat is not allowed to escape from the heated surface over heating will cause failure.

CHS-1E

These popular sized ceramic hotplate stirrers are designed for general laboratory requirements and are available in three styles - Cerastir CH-1 series - analogue, Cerastir^dig CHS-1 series - digital or the larger Cerastir⁺CHS-2.

Using a ceramic glass heating surface resistant to most chemicals, the plate can be precisely controlled, spillages are directed away from the controls and user. Smooth start up and changes in stirring speed ensure that the follower increases or decreases its mixing speed without
detaching.

• 
  
• Digital setting and control temperature and stirring speed.
• 
  
• Set and actual temperature displayed 1°C.
• 
  
• Auto setting overtemperature alarm +20°C above set point, disables heating.
• 
  
• PTFE coated remote probe available for immersion into flasks, for direct temperature control upto 200°C, also detachable for direct hob temperature control.
• 
  
• Set and actual stirring speed displayed.
• 
  
• Easy clean ceramic top and chemical resistant
• 
  
• Rapid warm up times
• 
  
• Over temperature protection
• 
  
• Smooth start stirring up to maximum speed 1500rpm
• 
  
• Maximum stirring volume 15 litres
• 
  
• Economically priced, robust design
• 
  
• Spill proof design, IP32
• 
  
• Fixings for retort rod/scaffolding
• 
  
• 2 PTFE coated stirring bars are supplied
• 
  
• "Hot" warning indicator will flash when hob temperature is above 50 degrees C, even when hob is turned off

Hot warning indicator when the hob temperature is above 50°C, even when the hob is turned off. Auto setting over temperature alarm +20°C above set point, disables heating. Spill proof design, IP32 with thermal over temperature protection.

550W

3 Years

1. The hotplate must not be used to heat materials or containers which have high reflective or insulating properties. Sand baths and silver foil must not be used. If heat is not allowed to escape from the heated surface over heating will cause failure.

CHS-2E

These popular sized ceramic hotplate stirrers are designed for general laboratory requirements and are available in three styles - Cerastir CH-1 series - analogue, Cerastir CHS-1 series - digital or the larger Cerastir CHS-2.

Using a ceramic glass heating surface resistant to most chemicals, the plate can be precisely controlled, spillages are directed away from the controls and user. Smooth start up and changes in stirring speed ensure that the follower increases or decreases its mixing speed without
detaching.

• 
  
• Easy clean ceramic top and chemical resistant
• 
  
• Rapid warm up times
• 
  
• Over temperature protection
• 
  
• Smooth start stirring up to maximum speed 1500rpm
• 
  
• Maximum stirring volume 15 litres
• 
  
• Economically priced, robust design
• 
  
• Spill proof design, IP32
• 
  
• Fixings for retort rod/scaffolding
• 
  
• 2 PTFE coated stirring bars are supplied
• 
  
• "Hot" warning indicator will flash when hob temperature is above 50 degrees C, even when hob is turned off

Hot warning indicator when the hob temperature is above 50°C, even when the hob is turned off. Spill proof design, IP32 with thermal over temperature protection.

1200W

3 Years

1. Maximum stirring volume = 15 litres.

2. The hotplate must not be used to heat materials or containers which have high reflective or insulating properties. Sand baths and silver foil must not be used. If heat is not allowed to escape from the heated surface over heating will cause failure.