NE8-S Fan Circulation

NE8-15S

15 Litre Incubator, Fan Assist Circulation

« Return to Incubators

Dimensions
External: 515w x 440d x 550h mm
Internal: 320w x 180d x 240h mm
Packed:: 85x75x75cm
Capacity
15 litre chamber Working capacity of the chamber can be smaller.
Temperature Range
ambient +5°C to 100°C
Sensitivity
±0.5°C @ 37°C / ±0.5°C @ 50°C Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
Uniformity
±0.5°C @ 37°C Uniformity measured in vertical axis in the chamber using Wired Shelves.
Door configuration
Single door Internal glass door and outer solid door with door lock and open door alarm
Shelves fitted
1
Shelves max. no.
2
Power consumption
300W
Voltage
230V 50Hz 230V 60Hz and 115V 60Hz models also available
Packed Weight
27kg
Product Code
NE8-15S
Description
Clifton Incubators feature intuitive easy to use controls with on screen guidance within a bold illuminated LCD display, offering precise time and temperature control from ambient +5°C to 100°C.

The Incubator can run at a set temperature immediately, delay start or commence to start in the future at a given date and time. Additionally with three available programs with up to 6 segments in each program which allows the creation of temperature time profiles of your choice.

All control surfaces feature smooth easy to wipe clean surfaces.

The digital microprocessor controls feature real time clock, diagnostics, digital LCD display to 0.1°C resolution, dual pt100 probes, including event log and data log of actual temperatures along with USB and RS232 interface. Every unit is supplied with a Calibration Certificate for validation.

Featuring a stainless steel interior with stainless steel outer case powder painted. Particular attention paid providing a good tight door closure and hinge design to maintain a sealed chamber in use. Case is well insulated to reduce heat loss in use. Access port fitted as standard.

Controls
Featuring bold illuminated LCD graphic display of measured temperatures in real-time, in increments of ±0.1°C, with fan speed status, set temperature, date and time.

Intuitive to use controls, utilising illuminated touch sensitive keypads with display ‘prompts’ assisting the setting of functions within the unit.

Option to set temperature in °C or °F.

The Incubator can be set to run at a set temperature immediately, delay start [dd:hh:mm ] or commence to start in the future at a given time and date [hh:mm, yyyy:mm:dd].

With three available programs and up to 6 segments in each it allows the creation of temperature time profiles of your choice, including for example fan speed, exhaust air flap setting, fast achieve set temperature and a setting allowing programs to be cycled. Any of these programs they can run immediately, delay start [dd:hh:mm ] or commence to start in the future at a given time and date [hh:mm, yyyy:mm:dd]. And when a program is running the controls are locked preventing accidental interruption or change however stopping a program is straightforward.

Fan speed
The Fan speed can be set from 0% no air convection within the chamber to 100% for maximum air convection.
Exhaust air flap
The Exhaust air flap can be set from 0% closed to 100% open and allows air from the chamber to vent.
Logger
Data logging of temperatures with date and times and an event log records door opening and closing, power on and off, starting, stopping and ending a program and alarms.
Heat-up Times
  • 15 mins
  • 16 mins
  • 17 mins
Safety Features
Switching on, the controls undergo an automatic diagnostic check.

Features a temperature sensor fail alarm with error reporting on LCD screen.

Power failure control with auto resume and event recording.

Setting of High and Low temperature Alarm, settable 0 – 5°C about set temperature.

Door opening generates an audible beep and indication on LCD display. When a program is running and should the door be left open a Door Alarm occurs, illuminating a red warning indicator and audible beeping until closed. Door open Alarm settable 0-5 minutes.

Over temperature protection can be selected in controls: Class 1 for overall unit protection or Class 2 for experiment/sample protection. Once protection is activated heating is switched off and a warning appears on screen. Class 3 protection, an accessory factory fit option, provides active protection once the temperature in chamber returns to normal values heating and control resumes.

Safety Class
Fitted with Class 1 for overall unit protection and Class 2 for experiment/sample protection. Accessory factory fit option Class 3 provides self-resetting protection at set temperature.
Warranty
3 Years
Applications, typical
Clifton incubators are ideal for sample incubation at temperatures above ambient up to +100 C.

- Incubation of samples for microbiological analysis.
- Analysis of thermal resistance of samples subjected to higher temperatures.
- Antibody testing.
- Bacteria testing.
- Crystallisation observations
- Cultivation of thermophilic micro-organisms
- Pharma stability tests
- Food industry testing.
Notes
  • Before ordering please check the room or building access where this unit will be installed and electrical power requirements.
  • Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
  • Working capacity of chamber may be smaller.
  • Incubators up to 112 litres are stackable.
  • Do not place in direct sunlight or near a heat or cold source.
  • Allow a 100mm air gap away from wall at rear. Ensure there is a minimum 300mm air gap from top of the unit to ceiling.

Walkabout Insulative Scoop Tray

  • Working temperature range -196°C to 93°C.
  • Durable and lightweight.
  • Lid not required.
  • Condensation Free.
  • Can be cleaned simply hand wash with mild detergent and towel dry.
  • Bath Armor™ - 0.5 litre

    Bath Armor™ also replaces pre-drilled blocks in your Blockheaters with thermally efficient pellets that are easy to keep clean and reduces the investment in blocks.

    Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Over-temperature safety protection 3.1

    Accessory factory fit option Class 3 provides self-resetting protection at set temperature.

    Interior lighting

    Factory fit accessory - Incubator temperature range limited to a maximum 70°C

    NE8-32S

    32 Litre Incubator, Fan Assist Circulation

    « Return to Incubators

    Dimensions
    External: 595w x 495d x 630h mm
    Internal: 400w x 250d x 320h mm
    Packed: 65x54x69cm
    Capacity
    Capacity, litres: 32 litre chamber Working capacity of the chamber can be smaller.
    Temperature Range
    ambient +5°C to 100°C
    Sensitivity
    ±0.2°C @ 37°C / ±0.2°C @ 50°C Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
    Uniformity
    ±0.2°C @ 37°C Uniformity measured in vertical axis in the chamber using Wired Shelves.
    Door configuration
    Single door Internal glass door and outer solid door with door lock and open door alarm
    Shelves fitted
    1
    Shelves max. no.
    3
    Power Consumption (220-240V)
    300W
    Voltage
    230V 50Hz 230V 60Hz and 115V 60Hz models also available
    Packed Weight
    37kg
    Product Code
    NE8-32S
    Description
    Clifton Incubators feature intuitive easy to use controls with on screen guidance within a bold illuminated LCD display, offering precise time and temperature control from ambient +5°C to 100°C.

    The Incubator can run at a set temperature immediately, delay start or commence to start in the future at a given date and time. Additionally with three available programs with up to 6 segments in each program which allows the creation of temperature time profiles of your choice.

    All control surfaces feature smooth easy to wipe clean surfaces.

    The digital microprocessor controls feature real time clock, diagnostics, digital LCD display to 0.1°C resolution, dual pt100 probes, including event log and data log of actual temperatures along with USB and RS232 interface. Every unit is supplied with a Calibration Certificate for validation.

    Featuring a stainless steel interior with stainless steel outer case powder painted. Particular attention paid providing a good tight door closure and hinge design to maintain a sealed chamber in use. Case is well insulated to reduce heat loss in use. Access port fitted as standard.

    Controls
    Featuring bold illuminated LCD graphic display of measured temperatures in real-time, in increments of ±0.1°C, with fan speed status, set temperature, date and time.

    Intuitive to use controls, utilising illuminated touch sensitive keypads with display prompts assisting the setting of functions within the unit.

    Option to set temperature in °C or °F.

    The Incubator can be set to run at a set temperature immediately, delay start [dd:hh:mm ] or commence to start in the future at a given time and date [hh:mm, yyyy:mm:dd].

    With three available programs and up to 6 segments in each it allows the creation of temperature time profiles of your choice, including for example fan speed, exhaust air flap setting, fast achieve set temperature and a setting allowing programs to be cycled. Any of these programs they can run immediately, delay start [dd:hh:mm ] or commence to start in the future at a given time and date [hh:mm, yyyy:mm:dd]. And when a program is running the controls are locked preventing accidental interruption or change however stopping a program is straightforward.

    Fan speed
    The Fan speed can be set from 0% no air convection within the chamber to 100% for maximum air convection.
    Exhaust air flap
    The Exhaust air flap can be set from 0% closed to 100% open and allows air from the chamber to vent.
    Logger
    Data logging of temperatures with date and times and an event log records door opening and closing, power on and off, starting, stopping and ending a program and alarms.
    Heat-up Times
    • 13 mins
    • 17 mins
    • 26 mins
    Safety Features
    Switching on, the controls undergo an automatic diagnostic check.

    Features a temperature sensor fail alarm with error reporting on LCD screen.

    Power failure control with auto resume and event recording.

    Setting of High and Low temperature Alarm, settable 0-5°C about set temperature.

    Door opening generates an audible beep and indication on LCD display. When a program is running and should the door be left open a Door Alarm occurs, illuminating a red warning indicator and audible beeping until closed. Door open Alarm settable 0-5 minutes.

    Over temperature protection can be selected in controls: Class 1 for overall unit protection; Class 2 for experiment/sample protection. Once protection is activated heating is deactivated and a warning appears on screen. Class 3 protection, an accessory factory fit option, provides active protection once the temperature in chamber returns to normal values heating and control resumes.

    Safety Class
    Fitted with Class 1 for overall unit protection and Class 2 for experiment/sample protection. Accessory factory fit option Class 3 provides self-resetting protection at set temperature.
    Warranty
    3 Years
    Tyical Applications
    Clifton incubators are ideal for sample incubation at temperatures above ambient up to +100 C.

    - Incubation of samples for microbiological analysis.
    - Analysis of thermal resistance of samples subjected to higher temperatures.
    - Antibody testing.
    - Bacteria testing.
    - Crystallisation observations
    - Cultivation of thermophilic micro-organisms
    - Pharma stability tests
    - Food industry testing.
    Notes
    • Before ordering please check the room or building access where this unit will be installed and electrical power requirements.
    • Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
    • Working capacity of chamber may be smaller.
    • Incubators up to 112 litres are stackable.
    • Do not place in direct sunlight or near a heat or cold source.
    • Allow a 100mm air gap away from wall at rear. Ensure there is a minimum 300mm air gap from top of the unit to ceiling.

    Walkabout Insulative Scoop Tray

  • Working temperature range -196°C to 93°C.
  • Durable and lightweight.
  • Lid not required.
  • Condensation Free.
  • Can be cleaned simply hand wash with mild detergent and towel dry.
  • Bath Armor™ - 0.5 litre

    Bath Armor™ also replaces pre-drilled blocks in your Blockheaters with thermally efficient pellets that are easy to keep clean and reduces the investment in blocks.

    Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Interior lighting

    Factory fit accessory - Incubator temperature range limited to a maximum 70°C

    Over-temperature safety protection 3.1

    Accessory factory fit option Class 3 provides self-resetting protection at set temperature.

    NE8-56S

    56 Litre Incubator, Fan Assist Circulation

    « Return to Incubators

    Dimensions
    External: 590w x 600d x 700h mm
    Internal: 395w x 360d x 395h mm
    Packed: 75x73x90cm
    Capacity
    Nominal Tank Capacity: 56 litre chamber Working capacity of the chamber can be smaller.
    Temperature Range
    ambient +5°C to 100°C
    Sensitivity
    ±0.2°C @ 37°C / ±0.2°C @ 50°C Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
    Uniformity
    ±0.2°C @ 37°C Uniformity measured in vertical axis in the chamber using Wired Shelves.
    Door configuration
    Single door Internal glass door and outer solid door with door lock and open door alarm
    Shelves fitted
    2
    Shelves max. no.
    5
    Power Consumption (220-240V)
    400W
    Voltage
    230V 50Hz 230V 60Hz and 115V 60Hz models also available
    Packed Weight
    61kg - palletised
    Product Code
    NE8-56S
    Description
    Clifton Incubators feature intuitive easy to use controls with on screen guidance within a bold illuminated LCD display, offering precise time and temperature control from ambient +5°C to 100°C.

    The Incubator can run at a set temperature immediately, delay start or commence to start in the future at a given date and time. Additionally with three available programs with up to 6 segments in each program which allows the creation of temperature time profiles of your choice.

    All control surfaces feature smooth easy to wipe clean surfaces.

    The digital microprocessor controls feature real time clock, diagnostics, digital LCD display to 0.1°C resolution, dual pt100 probes, including event log and data log of actual temperatures along with USB and RS232 interface. Every unit is supplied with a Calibration Certificate for validation.

    Featuring a stainless steel interior with stainless steel outer case powder painted. Particular attention paid providing a good tight door closure and hinge design to maintain a sealed chamber in use. Case is well insulated to reduce heat loss in use. Access port fitted as standard.

    Controls
    Featuring bold illuminated LCD graphic display of measured temperatures in real-time, in increments of ±0.1°C, with fan speed status, set temperature, date and time.

    Intuitive to use controls, utilising illuminated touch sensitive keypads with display prompts assisting the setting of functions within the unit.

    Option to set temperature in °C or °F.

    The Incubator can be set to run at a set temperature immediately, delay start [dd:hh:mm] or commence to start in the future at a given time and date [hh:mm, yyyy:mm:dd].

    With three available programs and up to 6 segments in each it allows the creation of temperature time profiles of your choice, including for example fan speed, exhaust air flap setting, fast achieve set temperature and a setting allowing programs to be cycled. Any of these programs they can run immediately, delay start [dd:hh:mm ] or commence to start in the future at a given time and date [hh:mm, yyyy:mm:dd]. And when a program is running the controls are locked preventing accidental interruption or change however stopping a program is straightforward.

    Fan speed
    The Fan speed can be set from 0% no air convection within the chamber to 100% for maximum air convection.
    Exhaust air flap
    The Exhaust air flap can be set from 0% closed to 100% open and allows air from the chamber to vent.
    Logger
    Data logging of temperatures with date and times and an event log records door opening and closing, power on and off, starting, stopping and ending a program and alarms.
    Heat-up Times
    • 13 mins
    • 22 mins
    • 42 mins
    Safety Features
    Switching on, the controls undergo an automatic diagnostic check.

    Features a temperature sensor fail alarm with error reporting on LCD screen.

    Power failure control with auto resume and event recording.

    Setting of High and Low temperature Alarm, settable 0-5°C about set temperature.

    Door opening generates an audible beep and indication on LCD display. When a program is running and should the door be left open a Door Alarm occurs, illuminating a red warning indicator and audible beeping until closed. Door open Alarm settable 0-5 minutes.

    Over temperature protection can be selected in controls: Class 1 for overall unit protection or Class 2 for experiment/sample protection. Once protection is activated heating is switched off and a warning appears on screen. Class 3 protection, an accessory factory fit option, provides active protection once the temperature in chamber returns to normal values heating and control resumes.

    Safety Class
    Fitted with Class 1 for overall unit protection and Class 2 for experiment/sample protection. Accessory factory fit option Class 3 provides self-resetting protection at set temperature.
    Warranty Period
    3 Years
    Typical Applications
    Clifton incubators are ideal for sample incubation at temperatures above ambient up to +100 C.

    - Incubation of samples for microbiological analysis.
    - Analysis of thermal resistance of samples subjected to higher temperatures.
    - Antibody testing.
    - Bacteria testing.
    - Crystallisation observations
    - Cultivation of thermophilic micro-organisms
    - Pharma stability tests
    - Food industry testing.
    Notes
    • Before ordering please check the room or building access where this unit will be installed and electrical power requirements.
    • Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
    • Working capacity of chamber may be smaller.
    • Incubators up to 112 litres are stackable.
    • Do not place in direct sunlight or near a heat or cold source.
    • Allow a 100mm air gap away from wall at rear. Ensure there is a minimum 300mm air gap from top of the unit to ceiling.

    Interior lighting

    Factory fit accessory - Incubator temperature range limited to a maximum 70°C

    Over-temperature safety protection 3.1

    Accessory factory fit option Class 3 provides self-resetting protection at set temperature.

    Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Walkabout Insulative Scoop Tray

  • Working temperature range -196°C to 93°C.
  • Durable and lightweight.
  • Lid not required.
  • Condensation Free.
  • Can be cleaned simply hand wash with mild detergent and towel dry.
  • Bath Armor™ - 0.5 litre

    Bath Armor™ also replaces pre-drilled blocks in your Blockheaters with thermally efficient pellets that are easy to keep clean and reduces the investment in blocks.

    Rotary Mixer Disc Complete With 12 Clips for Tubes diameters between 15 - 17mm

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 locating on three pins then secured in place with thumb wheel.

    Rotary Mixer Disc Complete With 6 Clips for Tube diameters between 25 - 30mm

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 or RM-2 locating on three pins then secured in place with thumb wheel.

    3 Tier disc assembly complete with 12 clips for each disc suitable for tube diameters 15-17mm

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 or RM-2 locating on three pins then secured in place with thumb wheel.

    3 Tier disc assembly complete with 24 clips for each disc suitable for tube diameters 8-11mm

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 locating on three pins then secured in place with thumb wheel.

    Carousel for tubes up to 16mm diameter

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 or RM-2 locating on three pins then secured in place with thumb wheel.

    Carousel for tubes up to 25mm diameter

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 or RM-2 locating on three pins then secured in place with thumb wheel.

    NE8-112S

    112 Litre Incubator, Fan Assist Circulation

    « Return to Incubators

    Dimensions
    External: 650w x 700d x 845h mm
    Internal: 460w x 450d x 540h mm
    Packed: 80x80x105cm
    Capacity
    Nominal Tank Capacity: 112 litre chamber Working capacity of the chamber can be smaller.
    Temperature Range
    ambient +5°C to 100°C
    Sensitivity
    ±0.2°C @ 37°C / ±0.2°C @ 50°C Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
    Uniformity
    ±0.2°C @ 37°C Uniformity measured in vertical axis in the chamber using Wired Shelves.
    Door configuration
    Single door Internal glass door and outer solid door with door lock and open door alarm
    Shelves fitted
    2
    Shelves max. no.
    7
    Power Consumption (220-240V)
    400W
    Voltage
    230V 50Hz 230V 60Hz and 115V 60Hz models also available
    Packed Weight
    85kg - palletised
    Product Code
    NE8-112S
    Description
    Clifton Incubators feature intuitive easy to use controls with on screen guidance within a bold illuminated LCD display, offering precise time and temperature control from ambient +5°C to 100°C.

    The Incubator can run at a set temperature immediately, delay start or commence to start in the future at a given date and time. Additionally with three available programs with up to 6 segments in each program which allows the creation of temperature time profiles of your choice.

    All control surfaces feature smooth easy to wipe clean surfaces.

    The digital microprocessor controls feature real time clock, diagnostics, digital LCD display to 0.1°C resolution, dual pt100 probes, including event log and data log of actual temperatures along with USB and RS232 interface. Every unit is supplied with a Calibration Certificate for validation.

    Featuring a stainless steel interior with stainless steel outer case powder painted. Particular attention paid providing a good tight door closure and hinge design to maintain a sealed chamber in use. Case is well insulated to reduce heat loss in use. Access port fitted as standard.

    Controls
    Featuring bold illuminated LCD graphic display of measured temperatures in real-time, in increments of ±0.1°C, with fan speed status, set temperature, date and time.

    Intuitive to use controls, utilising illuminated touch sensitive keypads with display prompts assisting the setting of functions within the unit.

    Option to set temperature in °C or °F.

    The Incubator can be set to run at a set temperature immediately, delay start [dd:hh:mm ] or commence to start in the future at a given time and date [hh:mm, yyyy:mm:dd].

    With three available programs and up to 6 segments in each it allows the creation of temperature time profiles of your choice, including for example fan speed, exhaust air flap setting, fast achieve set temperature and a setting allowing programs to be cycled. Any of these programs they can run immediately, delay start [dd:hh:mm ] or commence to start in the future at a given time and date [hh:mm, yyyy:mm:dd]. And when a program is running the controls are locked preventing accidental interruption or change however stopping a program is straightforward.

    Fan speed
    The Fan speed can be set from 0% no air convection within the chamber to 100% for maximum air convection.
    Exhaust air flap
    The Exhaust air flap can be set from 0% closed to 100% open and allows air from the chamber to vent.
    Logger
    Data logging of temperatures with date and times and an event log records door opening and closing, power on and off, starting, stopping and ending a program and alarms.
    Heat-up Times
    • 20 mins
    • 28 mins
    • 45 mins
    Safety Features
    Switching on, the controls undergo an automatic diagnostic check.

    Features a temperature sensor fail alarm with error reporting on LCD screen.

    Power failure control with auto resume and event recording.

    Setting of High and Low temperature Alarm, settable 0-5°C about set temperature.

    Door opening generates an audible beep and indication on LCD display. When a program is running and should the door be left open a Door Alarm occurs, illuminating a red warning indicator and audible beeping until closed. Door open Alarm settable 0-5 minutes.

    Over temperature protection can be selected in controls: Class 1 for overall unit protection or Class 2 for experiment/sample protection. Once protection is activated heating is switched off and a warning appears on screen. Class 3 protection, an accessory factory fit option, provides active protection once the temperature in chamber returns to normal values heating and control resumes.

    Safety Class
    Fitted with Class 1 for overall unit protection and Class 2 for experiment/sample protection. Accessory factory fit option Class 3 provides self-resetting protection at set temperature.
    Warranty Period
    3 Years
    Typical Applications
    Clifton incubators are ideal for sample incubation at temperatures above ambient up to +100 C.

    - Incubation of samples for microbiological analysis.
    - Analysis of thermal resistance of samples subjected to higher temperatures.
    - Antibody testing.
    - Bacteria testing.
    - Crystallisation observations
    - Cultivation of thermophilic micro-organisms
    - Pharma stability tests
    - Food industry testing.
    Notes
    • Before ordering please check the room or building access where this unit will be installed and electrical power requirements.
    • Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
    • Working capacity of chamber may be smaller.
    • Incubators up to 112 litres are stackable.
    • Do not place in direct sunlight or near a heat or cold source.
    • Allow a 100mm air gap away from wall at rear. Ensure there is a minimum 300mm air gap from top of the unit to ceiling.

    Interior lighting

    Factory fit accessory - Incubator temperature range limited to a maximum 70°C

    Over-temperature safety protection 3.1

    Accessory factory fit option Class 3 provides self-resetting protection at set temperature.

    Rotary Mixer Disc Complete With 24 Clips for Tube diameters between 8 - 11mm

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 locating on three pins then secured in place with thumb wheel.

    Rotary Mixer Disc Complete With 12 Clips for Tubes diameters between 15 - 17mm

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 locating on three pins then secured in place with thumb wheel.

    Rotary Mixer Disc Complete With 6 Clips for Tube diameters between 25 - 30mm

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 or RM-2 locating on three pins then secured in place with thumb wheel.

    Carousel for tubes up to 16mm diameter

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 or RM-2 locating on three pins then secured in place with thumb wheel.

    Carousel for tubes up to 25mm diameter

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 or RM-2 locating on three pins then secured in place with thumb wheel.

    3 Tier disc assembly complete with 24 clips for each disc suitable for tube diameters 8-11mm

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 locating on three pins then secured in place with thumb wheel.

    3 Tier disc assembly complete with 12 clips for each disc suitable for tube diameters 15-17mm

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 or RM-2 locating on three pins then secured in place with thumb wheel.

    Walkabout Insulative Scoop Tray

  • Working temperature range -196°C to 93°C.
  • Durable and lightweight.
  • Lid not required.
  • Condensation Free.
  • Can be cleaned simply hand wash with mild detergent and towel dry.
  • Bath Armor™ - 0.5 litre

    Bath Armor™ also replaces pre-drilled blocks in your Blockheaters with thermally efficient pellets that are easy to keep clean and reduces the investment in blocks.

    Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    NE8-240S

    240 Litre Incubator, Fan Assist Circulation

    « Return to Incubators

    Dimensions
    External: 815w x 760d x 1140h mm
    Internal: 600w x 510d x 800h mm
    Packed: 94x84x130cm
    Capacity
    Nominal Tank Capacity: 240 litre chamber Working capacity of the chamber can be smaller.
    Temperature Range
    ambient +5°C to 100°C
    Sensitivity
    ±0.2°C @ 37°C / ±0.2°C @ 50°C Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
    Uniformity
    ±0.2°C @ 37°C Uniformity measured in vertical axis in the chamber using Wired Shelves.
    Door configuration
    Double door Internal glass door and outer solid door with door lock and open door alarm
    Shelves fitted
    3
    Shelves max. no.
    10
    Power Consumption (220-240V)
    800W
    Voltage
    230V 50Hz 230V 60Hz and 115V 60Hz models also available
    Packed Weight
    150kg
    Product Code
    NE8-240S
    Description
    Clifton Incubators feature intuitive easy to use controls with on screen guidance within a bold illuminated LCD display, offering precise time and temperature control from ambient +5°C to 100°C.

    The Incubator can run at a set temperature immediately, delay start or commence to start in the future at a given date and time. Additionally with three available programs with up to 6 segments in each program which allows the creation of temperature time profiles of your choice.

    All control surfaces feature smooth easy to wipe clean surfaces.

    The digital microprocessor controls feature real time clock, diagnostics, digital LCD display to 0.1°C resolution, dual pt100 probes, including event log and data log of actual temperatures along with USB and RS232 interface. Every unit is supplied with a Calibration Certificate for validation.

    Featuring a stainless steel interior with stainless steel outer case powder painted. Particular attention paid providing a good tight door closure and hinge design to maintain a sealed chamber in use. Case is well insulated to reduce heat loss in use. Access port fitted as standard.

    Controls
    Featuring bold illuminated LCD graphic display of measured temperatures in real-time, in increments of ±0.1°C, with fan speed status, set temperature, date and time.

    Intuitive to use controls, utilising illuminated touch sensitive keypads with display promptsâ assisting the setting of functions within the unit.

    Option to set temperature in °C or °F.

    The Incubator can be set to run at a set temperature immediately, delay start [dd:hh:mm ] or commence to start in the future at a given time and date [hh:mm, yyyy:mm:dd].

    With three available programs and up to 6 segments in each it allows the creation of temperature time profiles of your choice, including for example fan speed, exhaust air flap setting, fast achieve set temperature and a setting allowing programs to be cycled. Any of these programs they can run immediately, delay start [dd:hh:mm ] or commence to start in the future at a given time and date [hh:mm, yyyy:mm:dd]. And when a program is running the controls are locked preventing accidental interruption or change however stopping a program is straightforward.

    Fan speed
    The Fan speed can be set from 0% no air convection within the chamber to 100% for maximum air convection.
    Exhaust air flap
    The Exhaust air flap can be set from 0% closed to 100% open and allows air from the chamber to vent.
    Logger
    Data logging of temperatures with date and times and an event log records door opening and closing, power on and off, starting, stopping and ending a program and alarms.
    Heat-up Times
    • 28 mins
    • 35 mins
    • 45 mins
    Safety Features
    Switching on, the controls undergo an automatic diagnostic check.

    Features a temperature sensor fail alarm with error reporting on LCD screen.

    Power failure control with auto resume and event recording.

    Setting of High and Low temperature Alarm, settable 0-5°C about set temperature.

    Door opening generates an audible beep and indication on LCD display. When a program is running and should the door be left open a Door Alarm occurs, illuminating a red warning indicator and audible beeping until closed. Door open Alarm settable 0-5 minutes.

    Over temperature protection can be selected in controls: Class 1 for overall unit protection or Class 2 for experiment/sample protection. Once protection is activated heating is switched off and a warning appears on screen. Class 3 protection, an accessory factory fit option, provides active protection once the temperature in chamber returns to normal values heating and control resumes.

    Safety Class
    Fitted with Class 1 for overall unit protection and Class 2 for experiment/sample protection. Accessory factory fit option Class 3 provides self-resetting protection at set temperature.
    Warranty Period
    3 Years
    Typical Applications
    Clifton incubators are ideal for sample incubation at temperatures above ambient up to +100 C.
    - Incubation of samples for microbiological analysis.
    - Analysis of thermal resistance of samples subjected to higher temperatures.
    - Antibody testing.
    - Bacteria testing.
    - Crystallisation observations
    - Cultivation of thermophilic micro-organisms
    - Pharma stability tests
    - Food industry testing.
    Notes
    • Before ordering please check the room or building access where this unit will be installed and electrical power requirements.
    • Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
    • Working capacity of chamber may be smaller.
    • Incubators up to 112 litres are stackable.
    • Do not place in direct sunlight or near a heat or cold source.
    • Allow a 100mm air gap away from wall at rear. Ensure there is a minimum 300mm air gap from top of the unit to ceiling.

    Over-temperature safety protection 3.1

    Accessory factory fit option Class 3 provides self-resetting protection at set temperature.

    Interior lighting

    Factory fit accessory - Incubator temperature range limited to a maximum 70°C

    Rotary Mixer Disc Complete With 12 Clips for Tubes diameters between 15 - 17mm

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 locating on three pins then secured in place with thumb wheel.

    Rotary Mixer Disc Complete With 24 Clips for Tube diameters between 8 - 11mm

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 locating on three pins then secured in place with thumb wheel.

    Rotary Mixer Disc Complete With 6 Clips for Tube diameters between 25 - 30mm

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 or RM-2 locating on three pins then secured in place with thumb wheel.

    3 Tier disc assembly complete with 12 clips for each disc suitable for tube diameters 15-17mm

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 or RM-2 locating on three pins then secured in place with thumb wheel.

    3 Tier disc assembly complete with 24 clips for each disc suitable for tube diameters 8-11mm

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 locating on three pins then secured in place with thumb wheel.

    Carousel for tubes up to 16mm diameter

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 or RM-2 locating on three pins then secured in place with thumb wheel.

    Carousel for tubes up to 25mm diameter

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 or RM-2 locating on three pins then secured in place with thumb wheel.

    Walkabout Insulative Scoop Tray

  • Working temperature range -196°C to 93°C.
  • Durable and lightweight.
  • Lid not required.
  • Condensation Free.
  • Can be cleaned simply hand wash with mild detergent and towel dry.
  • Bath Armor™ - 0.5 litre

    Bath Armor™ also replaces pre-drilled blocks in your Blockheaters with thermally efficient pellets that are easy to keep clean and reduces the investment in blocks.

    Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    NE8-400S

    400 Litre Incubator, Fan Assist Circulation

    « Return to Incubators

    Dimensions
    External: 1015w x 760d x 1380h mm
    Internal: 800w x 510d x 1040h mm
    Packed: 120x88x180cm
    Capacity
    Nominal Tank Capacity: 400 litre chamber Working capacity of the chamber can be smaller.
    Temperature Range
    ambient +5°C to 100°C
    Sensitivity
    ±0.4°C @ 37°C / ±0.4°C @ 50°C Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
    Uniformity
    ±0.4°C @ 37°C Uniformity measured in vertical axis in the chamber using Wired Shelves.
    Door configuration
    Double door Internal glass door and outer solid door with door lock and open door alarm
    Shelves fitted
    3
    Shelves max. no.
    14
    Power Consumption (220-240V)
    1200W
    Voltage
    230V 50Hz 230V 60Hz and 115V 60Hz models also available
    Packed Weight
    250kg
    Product Code
    NE8-400S
    Description
    Clifton Incubators feature intuitive easy to use controls with on screen guidance within a bold illuminated LCD display, offering precise time and temperature control from ambient +5°C to 100°C.

    The Incubator can run at a set temperature immediately, delay start or commence to start in the future at a given date and time. Additionally with three available programs with up to 6 segments in each program which allows the creation of temperature time profiles of your choice.

    All control surfaces feature smooth easy to wipe clean surfaces.

    The digital microprocessor controls feature real time clock, diagnostics, digital LCD display to 0.1°C resolution, dual pt100 probes, including event log and data log of actual temperatures along with USB and RS232 interface. Every unit is supplied with a Calibration Certificate for validation.

    Featuring a stainless steel interior with stainless steel outer case powder painted. Particular attention paid providing a good tight door closure and hinge design to maintain a sealed chamber in use. Case is well insulated to reduce heat loss in use. Access port fitted as standard.

    Controls
    Featuring bold illuminated LCD graphic display of measured temperatures in real-time, in increments of ±0.1°C, with fan speed status, set temperature, date and time.

    Intuitive to use controls, utilising illuminated touch sensitive keypads with display prompts assisting the setting of functions within the unit.

    Option to set temperature in °C or °F.

    The Incubator can be set to run at a set temperature immediately, delay start [dd:hh:mm ] or commence to start in the future at a given time and date [hh:mm, yyyy:mm:dd].

    With three available programs and up to 6 segments in each it allows the creation of temperature time profiles of your choice, including for example fan speed, exhaust air flap setting, fast achieve set temperature and a setting allowing programs to be cycled. Any of these programs they can run immediately, delay start [dd:hh:mm ] or commence to start in the future at a given time and date [hh:mm, yyyy:mm:dd]. And when a program is running the controls are locked preventing accidental interruption or change however stopping a program is straightforward.

    Fan speed
    The Fan speed can be set from 0% no air convection within the chamber to 100% for maximum air convection.
    Exhaust air flap
    The Exhaust air flap can be set from 0% closed to 100% open and allows air from the chamber to vent.
    Logger
    Data logging of temperatures with date and times and an event log records door opening and closing, power on and off, starting, stopping and ending a program and alarms.
    Heat-up Times
    • 16 mins
    • 28 mins
    • 36 mins
    Safety Features
    Switching on, the controls undergo an automatic diagnostic check.

    Features a temperature sensor fail alarm with error reporting on LCD screen.

    Power failure control with auto resume and event recording.

    Setting of High and Low temperature Alarm, settable 0-5°C about set temperature.

    Door opening generates an audible beep and indication on LCD display. When a program is running and should the door be left open a Door Alarm occurs, illuminating a red warning indicator and audible beeping until closed. Door open Alarm settable 0-5 minutes.

    Over temperature protection can be selected in controls: Class 1 for overall unit protection or Class 2 for experiment/sample protection. Once protection is activated heating is switched off and a warning appears on screen. Class 3 protection, an accessory factory fit option, provides active protection once the temperature in chamber returns to normal values heating and control resumes.

    Safety Class
    Fitted with Class 1 for overall unit protection and Class 2 for experiment/sample protection. Accessory factory fit option Class 3 provides self-resetting protection at set temperature.
    Warranty Period
    3 Years
    Typical Applications
    Clifton incubators are ideal for sample incubation at temperatures above ambient up to +100 C.

    - Incubation of samples for microbiological analysis.
    - Analysis of thermal resistance of samples subjected to higher temperatures.
    - Antibody testing.
    - Bacteria testing.
    - Crystallisation observations
    - Cultivation of thermophilic micro-organisms
    - Pharma stability tests
    - Food industry testing.
    Notes
    • Before ordering please check the room or building access where this unit will be installed and electrical power requirements.
    • Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
    • Working capacity of chamber may be smaller.
    • Incubators up to 112 litres are stackable.
    • Do not place in direct sunlight or near a heat or cold source.
    • Allow a 100mm air gap away from wall at rear. Ensure there is a minimum 300mm air gap from top of the unit to ceiling.

    Over-temperature safety protection 3.1

    Accessory factory fit option Class 3 provides self-resetting protection at set temperature.

    Interior lighting

    Factory fit accessory - Incubator temperature range limited to a maximum 70°C

    Rotary Mixer Disc Complete With 12 Clips for Tubes diameters between 15 - 17mm

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 locating on three pins then secured in place with thumb wheel.

    Rotary Mixer Disc Complete With 24 Clips for Tube diameters between 8 - 11mm

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 locating on three pins then secured in place with thumb wheel.

    Rotary Mixer Disc Complete With 6 Clips for Tube diameters between 25 - 30mm

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 or RM-2 locating on three pins then secured in place with thumb wheel.

    3 Tier disc assembly complete with 12 clips for each disc suitable for tube diameters 15-17mm

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 or RM-2 locating on three pins then secured in place with thumb wheel.

    3 Tier disc assembly complete with 24 clips for each disc suitable for tube diameters 8-11mm

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 locating on three pins then secured in place with thumb wheel.

    Carousel for tubes up to 16mm diameter

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 or RM-2 locating on three pins then secured in place with thumb wheel.

    Carousel for tubes up to 25mm diameter

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 or RM-2 locating on three pins then secured in place with thumb wheel.

    Walkabout Insulative Scoop Tray

  • Working temperature range -196°C to 93°C.
  • Durable and lightweight.
  • Lid not required.
  • Condensation Free.
  • Can be cleaned simply hand wash with mild detergent and towel dry.
  • Bath Armor™ - 0.5 litre

    Bath Armor™ also replaces pre-drilled blocks in your Blockheaters with thermally efficient pellets that are easy to keep clean and reduces the investment in blocks.

    Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    NE8-750S

    750 Litre Incubator, Fan Assist Circulation

    « Return to Incubators

    Dimensions
    External: 1260w x 865d x 1590h mm
    Internal: 1040w x 600d x 1200h mm
    Packed: 135x92x211cm
    Capacity
    Nominal Tank Capacity: 750 litre chamber Working capacity of the chamber can be smaller.
    Temperature Range
    ambient +5°C to 100°C
    Sensitivity
    ±0.4°C @ 37°C / ±0.4°C @ 50°C Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
    Uniformity
    ±0.4°C @ 37°C Uniformity measured in vertical axis in the chamber using Wired Shelves.
    Door configuration
    Double door Internal glass door and outer solid door with door lock and open door alarm
    Shelves fitted
    5
    Shelves max. no.
    16
    Power Consumption (220-240V)
    1800W
    Voltage
    230V 50Hz 230V 60Hz and 115V 60Hz models also available
    Packed Weight
    320kg
    Product Code
    NE8-750S
    Description
    Clifton Incubators feature intuitive easy to use controls with on screen guidance within a bold illuminated LCD display, offering precise time and temperature control from ambient +5°C to 100°C.

    The Incubator can run at a set temperature immediately, delay start or commence to start in the future at a given date and time. Additionally with three available programs with up to 6 segments in each program which allows the creation of temperature time profiles of your choice.

    All control surfaces feature smooth easy to wipe clean surfaces.

    The digital microprocessor controls feature real time clock, diagnostics, digital LCD display to 0.1°C resolution, dual pt100 probes, including event log and data log of actual temperatures along with USB and RS232 interface. Every unit is supplied with a Calibration Certificate for validation.

    Featuring a stainless steel interior with stainless steel outer case powder painted. Particular attention paid providing a good tight door closure and hinge design to maintain a sealed chamber in use. Case is well insulated to reduce heat loss in use. Access port fitted as standard.

    Controls
    Featuring bold illuminated LCD graphic display of measured temperatures in real-time, in increments of ±0.1°C, with fan speed status, set temperature, date and time.

    Intuitive to use controls, utilising illuminated touch sensitive keypads with display prompts assisting the setting of functions within the unit.

    Option to set temperature in °C or °F.

    The Incubator can be set to run at a set temperature immediately, delay start [dd:hh:mm ] or commence to start in the future at a given time and date [hh:mm, yyyy:mm:dd].

    With three available programs and up to 6 segments in each it allows the creation of temperature time profiles of your choice, including for example fan speed, exhaust air flap setting, fast achieve set temperature and a setting allowing programs to be cycled. Any of these programs they can run immediately, delay start [dd:hh:mm ] or commence to start in the future at a given time and date [hh:mm, yyyy:mm:dd]. And when a program is running the controls are locked preventing accidental interruption or change however stopping a program is straightforward.

    Fan speed
    The Fan speed can be set from 0% no air convection within the chamber to 100% for maximum air convection.
    Exhaust air flap
    The Exhaust air flap can be set from 0% closed to 100% open and allows air from the chamber to vent.
    Logger
    Data logging of temperatures with date and times and an event log records door opening and closing, power on and off, starting, stopping and ending a program and alarms.
    Heat-up Times
    • 17 mins
    • 25 mins
    • 37 mins
    Safety Features
    Switching on, the controls undergo an automatic diagnostic check.

    Features a temperature sensor fail alarm with error reporting on LCD screen.

    Power failure control with auto resume and event recording.

    Setting of High and Low temperature Alarm, settable 0-5°C about set temperature.

    Door opening generates an audible beep and indication on LCD display. When a program is running and should the door be left open a Door Alarm occurs, illuminating a red warning indicator and audible beeping until closed. Door open Alarm settable 0-5 minutes.

    Over temperature protection can be selected in controls: Class 1 for overall unit protection or Class 2 for experiment/sample protection. Once protection is activated heating is switched off and a warning appears on screen. Class 3 protection, an accessory factory fit option, provides active protection once the temperature in chamber returns to normal values heating and control resumes.

    Safety Class
    Fitted with Class 1 for overall unit protection and Class 2 for experiment/sample protection. Accessory factory fit option Class 3 provides self-resetting protection at set temperature.
    Warranty Period
    3 Years
    Typical Applications
    Clifton incubators are ideal for sample incubation at temperatures above ambient up to +100 C.

    - Incubation of samples for microbiological analysis.
    - Analysis of thermal resistance of samples subjected to higher temperatures.
    - Antibody testing.
    - Bacteria testing.
    - Crystallisation observations
    - Cultivation of thermophilic micro-organisms
    - Pharma stability tests
    - Food industry testing.
    Notes
    • Before ordering please check the room or building access where this unit will be installed and electrical power requirements.
    • Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
    • Working capacity of chamber may be smaller.
    • Incubators up to 112 litres are stackable.
    • Do not place in direct sunlight or near a heat or cold source.
    • Allow a 100mm air gap away from wall at rear. Ensure there is a minimum 300mm air gap from top of the unit to ceiling.

    Over-temperature safety protection 3.1

    Accessory factory fit option Class 3 provides self-resetting protection at set temperature.

    Interior lighting

    Factory fit accessory - Incubator temperature range limited to a maximum 70°C

    Rotary Mixer Disc Complete With 12 Clips for Tubes diameters between 15 - 17mm

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 locating on three pins then secured in place with thumb wheel.

    Rotary Mixer Disc Complete With 24 Clips for Tube diameters between 8 - 11mm

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 locating on three pins then secured in place with thumb wheel.

    Rotary Mixer Disc Complete With 6 Clips for Tube diameters between 25 - 30mm

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 or RM-2 locating on three pins then secured in place with thumb wheel.

    3 Tier disc assembly complete with 12 clips for each disc suitable for tube diameters 15-17mm

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 or RM-2 locating on three pins then secured in place with thumb wheel.

    3 Tier disc assembly complete with 24 clips for each disc suitable for tube diameters 8-11mm

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 locating on three pins then secured in place with thumb wheel.

    Carousel for tubes up to 16mm diameter

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 or RM-2 locating on three pins then secured in place with thumb wheel.

    Carousel for tubes up to 25mm diameter

    1. The range of accessories can also be autoclaved and allow for easy loading and tube removal.

    2. The accessory is easy to fit onto the RM-1 or RM-2 locating on three pins then secured in place with thumb wheel.

    Walkabout Insulative Scoop Tray

  • Working temperature range -196°C to 93°C.
  • Durable and lightweight.
  • Lid not required.
  • Condensation Free.
  • Can be cleaned simply hand wash with mild detergent and towel dry.
  • Bath Armor™ - 0.5 litre

    Bath Armor™ also replaces pre-drilled blocks in your Blockheaters with thermally efficient pellets that are easy to keep clean and reduces the investment in blocks.

    Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 16mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 25mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 12mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 18mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.

    Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter

    Laboratory Test Tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Suitable for test tubes with an external diameter 31mm.

    Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.