NE7-TP Cooled

NE7-56TP

56L Cooled Incubator, touch screen, fan assist circulation

« Return to Incubators

Dimensions
External: 590w x 620d x 960h mm
Internal: 395w x 360d x 395h mm
Packed: 75x73x118cm
Capacity
Capacity: 56 litre chamber Working capacity of the chamber can be smaller.
Temperature Range
Temperature range 0°C to 70°C, cooling temperature range 0°C to 47°C Temperature range can be extended to -10°C as an accessory item, factory configurable
Sensitivity
±0.5°C @ 0°C / ±0.2°C @ 37°C Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
Uniformity
±0.4°C @ 37°C Uniformity measured in vertical axis in the chamber using Wired Shelves.
Door configuration
Single door Internal glass door and outer solid door with door lock and open door alarm
Shelves fitted
2
Shelves max. no.
5
Shelf max. workload
10kg
Chamber max. workload
40kg
Power Consumption (220-240V)
400W
Voltage
230V 50Hz Also available 230V 60Hz or 120V 60Hz models, please specify on order.
Packed Weight
69kg + gas in the cooling installation R134a/0.15kg
Product Code
NE7-56TP
Description
Clifton Cooled Incubators feature ‘touch screen’ colour LCD controls for precision temperature and time control from 0°C to 70°C, cooling temperature range 0°C to 47°C, at set temperatures, delay start or run for a timed period reproducing precise chamber conditions.

Individuals can also store up to 20 programs, with their own password logon for program access and chamber temperatures can be logged to USB, for good laboratory practice.

All control surfaces are wipe clean.

The digital microprocessor controls feature a real time clock, diagnostics, digital LCD display to 0.1°C resolution, dual pt100 probes, including data logging of actual temperatures using the USB port. Every unit is supplied with a Calibration Certificate validating chamber conditions at 37°C.

Featuring a stainless steel interior with stainless steel outer case powder painted. Particular attention paid providing a good tight door closure and hinge design to maintain a sealed chamber in use. Case is well insulated to reduce temperature dissipation in use. This model is a double door unit free standing model features an Access port as standard 30 mm diameter.
Controls
Featuring bold full colour 5.7” touch screen LCD display of measured temperatures in real-time, in increments of ±0.1°C, with fan speed status, set temperature, date and time.

Touch screen controls guide you through control functions.

The Cooled Incubator can be set to run continuous at a set temperature, delay start or commence to start unsupervised in the future at a given time and date.

Each user can access controls via a login screen with 20 available programs and up to 9 segments in each program for temperature time profiles. An administrator function manages all user accounts.

Program content can include for example fan speed, exhaust air flap, setting of heating or cooling biased to achieve either time or temperature ramps. Any of these programs can run immediately, delay start [1m to 99:59h] or commence to start in the future at a given time and date, cycled to repeat or enable a 7-day program mode allows the activation of a daily program.

Additional features, defrost function and real time clock.

Heat-up and Cool down Times
  • 20 mins
  • 25 mins
  • 25 mins
Fan speed
The Fan speed can be set from 10% to 100% for maximum air convection in the chamber.
Exhaust air flap
The Exhaust air flap can be set from 0% closed to 100% open and allows air from the chamber to vent in either heating or cooling modes.
Logger
Data logging of minimum, average and maximum temperature values to USB.
Safety Features
Switching on, the controls undergo an automatic diagnostic check.

Features a temperature sensor fail alarm with error reporting on screen.

Power failure control with auto resume and event recording.

Setting of High and Low temperature Alarm.

Door opening generates an audible beep and indication on LCD display. When a program is running and should the door be left open a Door Alarm occurs.

Over temperature protection Class 1 provides overall unit protection. Also featuring Class 3.3 providing sample protection about set temperature, under and over temperature settings, that will cut off heating or cooling until the chamber temperature returns to normal values when heating or cooling control automatically resumes.

Safety Class
Fitted with Class 1 for overall unit protection. Class 3.3 self-resetting protection, protecting samples in the chamber at set temperatures.
Warranty Period
3 Years
Notes
  • Before ordering please check the room or building access where this unit will be installed and electrical power requirements.
  • Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
  • Working capacity of chamber may be smaller.
  • Incubators up to 112 litres are stackable.
  • Do not place in direct sunlight or near a heat or cold source.
  • Allow a 100mm air gap away from wall at rear. Ensure there is a minimum 300mm air gap from top of the unit to ceiling.

Temperature range increase to -10°C for 56L cooled incubator

Temperature range increase to -10°C for 56L cooled incubator

Photoperiodic System, 2 Lighting elements, ceiling mounted, day and night sim software

Photoperiodic System, 2 Lighting elements, ceiling mounted, day and night sim software

Photoperiodic System, 5 Lighting elements, door mounted, day and night sim software

Photoperiodic System, 5 Lighting elements, door mounted, day and night sim software

Internal power socket for Fan Assisted s range only

This factory fit accessory provides a UK 3pin 230V power supply inside the chamber of S series Clifton Incubator for powering Mixers or lighting.

Over-temperature safety protection 3.1

Accessory factory fit option Class 3 provides self-resetting protection at set temperature.

Interior lighting

Factory fit accessory - Incubator temperature range limited to a maximum 70°C

Walkabout Insulative Scoop Tray

  • Working temperature range -196°C to 93°C.
  • Durable and lightweight.
  • Lid not required.
  • Condensation Free.
  • Can be cleaned simply hand wash with mild detergent and towel dry.
  • Bath Armor™ - 0.5 litre

    Bath Armor™ also replaces pre-drilled blocks in your Blockheaters with thermally efficient pellets that are easy to keep clean and reduces the investment in blocks.

    Chill Bucket with Beads, Bead bag with 2 off Chilli Packs

    The Chill Bucket can maintain cold temperatures 1 - 8°C for 4 or more hours with one Chill Pack. For up to 8 or more hours a second Chill Pack is recommended. The Chill Packs were frozen to -20°C in a freezer and the Beads cooled to 2°C in a refrigerator prior to placing in the bucket.

    Temperature data represents actual measurement results from a single probe in centre of the bucket.

    NE7-112TP

    112L Cooled Incubator, touch screen, fan assist circulation

    « Return to Incubators

    Dimensions
    External: 650w x 710d x 1100 mm
    Internal: 460w x 450d x 540h mm
    Packed: 80x80x133cm
    Capacity
    112 litre chamber Working capacity of the chamber can be smaller.
    Temperature range
    Temperature range 0°C to 70°C, cooling temperature range 0°C to 47°C Temperature range can be extended to -10°C as an accessory item, factory configurable.
    Sensitivity
    ±0.5°C @ 0°C / ±0.2°C @ 37°C Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
    Uniformity
    ±0.6°C @ 37°C Uniformity measured in vertical axis in the chamber using Wired Shelves.
    Door configuration
    Single door Internal glass door and outer solid door with door lock and open door alarm
    Shelves fitted
    2
    Shelves max. no.
    7
    Shelves max. workload
    10kg
    Chamber max. workload
    60kg
    Power consumption
    400W
    Voltage
    230V 50Hz Also available 230V 60Hz or 120V 60Hz models, please specify on order.
    Packed weight
    90kg + gas in the cooling installation R134a/0.15kg
    Product Code
    NE7-112TP
    Description
    Clifton Cooled Incubators feature ‘touch screen’ colour LCD controls for precision temperature and time control from 0°C to 70°C, cooling temperature range 0°C to 47°C, at set temperatures, delay start or run for a timed period reproducing precise chamber conditions.

    Individuals can also store up to 20 programs, with their own password logon for program access and chamber temperatures can be logged to USB, for good laboratory practice.

    All control surfaces are wipe clean.

    The digital microprocessor controls feature a real time clock, diagnostics, digital LCD display to 0.1°C resolution, dual pt100 probes, including data logging of actual temperatures using the USB port. Every unit is supplied with a Calibration Certificate validating chamber conditions at 37°C.

    Featuring a stainless steel interior with stainless steel outer case powder painted. Particular attention paid providing a good tight door closure and hinge design to maintain a sealed chamber in use. Case is well insulated to reduce temperature dissipation in use. This model is a double door unit free standing model features an Access port as standard 30 mm diameter.
    Controls
    Featuring bold full colour 5.7” touch screen LCD display of measured temperatures in real-time, in increments of ±0.1°C, with fan speed status, set temperature, date and time.

    Touch screen controls guide you through control functions.

    The Cooled Incubator can be set to run continuous at a set temperature, delay start or commence to start unsupervised in the future at a given time and date.

    Each user can access controls via a login screen with 20 available programs and up to 9 segments in each program for temperature time profiles. An administrator function manages all user accounts.

    Program content can include for example fan speed, exhaust air flap, setting of heating or cooling biased to achieve either time or temperature ramps. Any of these programs can run immediately, delay start [1m to 99:59h] or commence to start in the future at a given time and date, cycled to repeat or enable a 7-day program mode allows the activation of a daily program.

    Additional features, defrost function and real time clock.
    Heat-up and Cool down Times
    • 20 mins
    • 30 mins
    • 35 mins
    Fan speed
    The Fan speed can be set from 10% to 100% for maximum air convection in the chamber.
    Exhaust air flap
    The Exhaust air flap can be set from 0% closed to 100% open and allows air from the chamber to vent in either heating or cooling modes.
    Logger
    Data logging of minimum, average and maximum temperature values to USB.
    Safety features
    Switching on, the controls undergo an automatic diagnostic check.

    Features a temperature sensor fail alarm with error reporting on screen.

    Power failure control with auto resume and event recording.

    Setting of High and Low temperature Alarm.

    Door opening generates an audible beep and indication on LCD display. When a program is running and should the door be left open a Door Alarm occurs.

    Over temperature protection Class 1 provides overall unit protection. Also featuring Class 3.3 providing sample protection about set temperature, under and over temperature settings, that will cut off heating or cooling until the chamber temperature returns to normal values when heating or cooling control automatically resumes.

    Safety class
    Fitted with Class 1 for overall unit protection. Class 3.3 self-resetting protection, protecting samples in the chamber at set temperatures.
    Warranty period
    3 Years
    Notes
    • Before ordering please check the room or building access where this unit will be installed and electrical power requirements.
    • Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
    • Working capacity of chamber may be smaller.
    • Incubators up to 112 litres are stackable.
    • Do not place in direct sunlight or near a heat or cold source.
    • Allow a 100mm air gap away from wall at rear. Ensure there is a minimum 300mm air gap from top of the unit to ceiling.

    Temperature range increase to -10°C for 112L cooled incubator

    Temperature range increase to -10°C for 112L cooled incubator

    Photoperiodic System, 3 Lighting elements, ceiling mounted, day and night sim software

    Photoperiodic System, 3 Lighting elements, ceiling mounted, day and night sim software

    Photoperiodic System, 6 Lighting elements, door mounted, day and night sim software

    Photoperiodic System, 6 Lighting elements, door mounted, day and night sim software

    Internal power socket for Fan Assisted s range only

    This factory fit accessory provides a UK 3pin 230V power supply inside the chamber of S series Clifton Incubator for powering Mixers or lighting.

    Over-temperature safety protection 3.1

    Accessory factory fit option Class 3 provides self-resetting protection at set temperature.

    Interior lighting

    Factory fit accessory - Incubator temperature range limited to a maximum 70°C

    Walkabout Insulative Scoop Tray

  • Working temperature range -196°C to 93°C.
  • Durable and lightweight.
  • Lid not required.
  • Condensation Free.
  • Can be cleaned simply hand wash with mild detergent and towel dry.
  • Bath Armor™ - 0.5 litre

    Bath Armor™ also replaces pre-drilled blocks in your Blockheaters with thermally efficient pellets that are easy to keep clean and reduces the investment in blocks.

    Chill Bucket with Beads, Bead bag with 2 off Chilli Packs

    The Chill Bucket can maintain cold temperatures 1 - 8°C for 4 or more hours with one Chill Pack. For up to 8 or more hours a second Chill Pack is recommended. The Chill Packs were frozen to -20°C in a freezer and the Beads cooled to 2°C in a refrigerator prior to placing in the bucket.

    Temperature data represents actual measurement results from a single probe in centre of the bucket.

    NE7-240TP

    240L Cooled Incubator, touch screen, fan assist circulation

    « Return to Incubators

    Dimensions
    External: 815w x 770d x 1430h mm
    Internal: 600w x 510d x 800h mm
    Packed: 100x88x162cm
    Capacity
    240 litre chamber Working capacity of the chamber can be smaller.
    Temperature range
    Temperature range 0°C to 70°C, cooling temperature range 0°C to 47°C Temperature range can be extended to -10°C as an accessory item, factory configurable
    Sensitivity
    ±0.4°C @ 0°C / ±0.2°C @ 37°C Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
    Uniformity
    ±0.3°C @ 37°C Uniformity measured in vertical axis in the chamber using Wired Shelves.
    Door configuration
    Double door Internal glass door and outer solid door with door lock and open door alarm
    Shelves fitted
    3
    Shelves max. no.
    10
    Shelves max. workload
    10kg
    Chamber max. workload
    90kg
    Power consumption
    800W
    Voltage
    230V 50Hz Also available 230V 60Hz or 120V 60Hz models, please specify on order.
    Packed weight
    140kg + gas in the cooling installation R134a/0.18kg
    Product Code
    NE7-240TP
    Description
    Clifton Cooled Incubators feature ‘touch screen’ colour LCD controls for precision temperature and time control from 0°C to 70°C, cooling temperature range 0°C to 47°C, at set temperatures, delay start or run for a timed period reproducing precise chamber conditions.

    Individuals can also store up to 20 programs, with their own password login for program access and chamber temperatures can be logged to USB, for good laboratory practice.

    All control surfaces are wipe clean.

    The digital microprocessor controls feature a real time clock, diagnostics, digital LCD display to 0.1°C resolution, dual pt100 probes, including data logging of actual temperatures using the USB port. Every unit is supplied with a Calibration Certificate validating chamber conditions at 37°C.

    Featuring a stainless steel interior with stainless steel outer case powder painted. Particular attention paid providing a good tight door closure and hinge design to maintain a sealed chamber in use. Case is well insulated to reduce temperature dissipation in use. This model is a double door unit free standing model features an Access port as standard 30 mm diameter.
    Controls
    Featuring bold full colour 5.7” touch screen LCD display of measured temperatures in real-time, in increments of ±0.1°C, with fan speed status, set temperature, date and time.

    Touch screen controls guide you through control functions.

    The Cooled Incubator can be set to run continuous at a set temperature, delay start or commence to start unsupervised in the future at a given time and date.

    Each user can access controls via a login screen with 20 available programs and up to 9 segments in each program for temperature time profiles. An administrator function manages all user accounts.

    Program content can include for example fan speed, exhaust air flap, setting of heating or cooling biased to achieve either time or temperature ramps. Any of these programs can run immediately, delay start [1m to 99:59h] or commence to start in the future at a given time and date, cycled to repeat or enable a 7-day program mode allows the activation of a daily program.

    Additional features, defrost function and real time clock.
    Heat-up and Cool down Times
    • 20 mins
    • 25 mins
    • 30 mins
    Fan speed
    The Fan speed can be set from 10% to 100% for maximum air convection in the chamber.
    Exhaust air flap
    The Exhaust air flap can be set from 0% closed to 100% open and allows air from the chamber to vent in either heating or cooling modes.
    Logger
    Data logging of minimum, average and maximum temperature values to USB.
    Safety features
    Switching on, the controls undergo an automatic diagnostic check.

    Features a temperature sensor fail alarm with error reporting on screen.

    Power failure control with auto resume and event recording.

    Setting of High and Low temperature Alarm.

    Door opening generates an audible beep and indication on LCD display. When a program is running and should the door be left open a Door Alarm occurs.

    Over temperature protection Class 1 provides overall unit protection. Also featuring Class 3.3 providing sample protection about set temperature, under and over temperature settings, that will cut off heating or cooling until the chamber temperature returns to normal values when heating or cooling control automatically resumes.

    Safety class
    Fitted with Class 1 for overall unit protection. Class 3.3 self-resetting protection, protecting samples in the chamber at set temperatures.
    Warranty period
    3 Years
    Notes
    • Before ordering please check the room or building access where this unit will be installed and electrical power requirements.
    • Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
    • Working capacity of chamber may be smaller.
    • Incubators up to 112 litres are stackable.
    • Do not place in direct sunlight or near a heat or cold source.
    • Allow a 100mm air gap away from wall at rear. Ensure there is a minimum 300mm air gap from top of the unit to ceiling.

    Temperature range increase to -10°C for 240L cooled incubator

    Temperature range increase to -10°C for 240L cooled incubator

    Photoperiodic System, 6 Lighting elements, door mounted, day and night sim software

    Photoperiodic System, 6 Lighting elements, door mounted, day and night sim software

    Photoperiodic System, 8 Lighting elements, door mounted, day and night sim software

    Photoperiodic System, 8 Lighting elements, door mounted, day and night sim software

    Internal power socket for Fan Assisted s range only

    This factory fit accessory provides a UK 3pin 230V power supply inside the chamber of S series Clifton Incubator for powering Mixers or lighting.

    Over-temperature safety protection 3.1

    Accessory factory fit option Class 3 provides self-resetting protection at set temperature.

    Interior lighting

    Factory fit accessory - Incubator temperature range limited to a maximum 70°C

    Walkabout Insulative Scoop Tray

  • Working temperature range -196°C to 93°C.
  • Durable and lightweight.
  • Lid not required.
  • Condensation Free.
  • Can be cleaned simply hand wash with mild detergent and towel dry.
  • Bath Armor™ - 0.5 litre

    Bath Armor™ also replaces pre-drilled blocks in your Blockheaters with thermally efficient pellets that are easy to keep clean and reduces the investment in blocks.

    Chill Bucket with Beads, Bead bag with 2 off Chilli Packs

    The Chill Bucket can maintain cold temperatures 1 - 8°C for 4 or more hours with one Chill Pack. For up to 8 or more hours a second Chill Pack is recommended. The Chill Packs were frozen to -20°C in a freezer and the Beads cooled to 2°C in a refrigerator prior to placing in the bucket.

    Temperature data represents actual measurement results from a single probe in centre of the bucket.

    NE7-400TP

    400L Cooled Incubator, touch screen, fan assist circulation

    « Return to Incubators

    Dimensions
    External: 1015w x 770d x 1680h mm
    Internal: 800w x 510d x 1040h mm
    Packed: 120x88x180cm
    Capacity
    400 litre chamber Working capacity of the chamber can be smaller.
    Temperature range
    Temperature range 0°C to 70°C, cooling temperature range 0°C to 47°C Temperature range can be extended to -10°C as an accessory item, factory configurable
    Sensitivity
    ±0.3°C @ 0°C / ±0.2°C @ 37°C Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
    Uniformity
    ±0.4°C @ 37°CUniformity measured in vertical axis in the chamber using Wired Shelves.
    Door configuration
    Double door Internal glass door and outer solid door with door lock and open door alarm
    Shelves fitted
    3
    Shelves max. no.
    14
    Shelf max. workload
    10kg
    Chamber max. workload
    120kg
    Power consumption
    1200W
    Voltage
    230V 50Hz Also available 230V 60Hz or 120V 60Hz models, please specify on order.
    Packed weight
    180kg + gas in the cooling installation R404/0.18kg
    Product Code
    NE7-400TP
    Description
    Clifton Cooled Incubators feature ‘touch screen’ colour LCD controls for precision temperature and time control from 0°C to 70°C, cooling temperature range 0°C to 47°C, at set temperatures, delay start or run for a timed period reproducing precise chamber conditions.

    Individuals can also store up to 20 programs, with their own password login for program access and chamber temperatures can be logged to USB, for good laboratory practice.

    All control surfaces are wipe clean.

    The digital microprocessor controls feature a real time clock, diagnostics, digital LCD display to 0.1°C resolution, dual pt100 probes, including data logging of actual temperatures using the USB port. Every unit is supplied with a Calibration Certificate validating chamber conditions at 37°C.

    Access port fitted as standard 30 mm diameter.

    Featuring a stainless steel interior with stainless steel outer case powder painted. Particular attention paid providing a good tight door closure and hinge design to maintain a sealed chamber in use. Case is well insulated to reduce temperature dissipation in use. This model is a double door unit free standing model features an Access port as standard 30 mm diameter.
    Controls
    Featuring bold full colour 5.7” touch screen LCD display of measured temperatures in real-time, in increments of ±0.1°C, with fan speed status, set temperature, date and time.

    Touch screen controls guide you through control functions.

    The Cooled Incubator can be set to run continuous at a set temperature, delay start or commence to start unsupervised in the future at a given time and date.

    Each user can access controls via a login screen with 20 available programs and up to 9 segments in each program for temperature time profiles. An administrator function manages all user accounts.

    Program content can include for example fan speed, exhaust air flap, setting of heating or cooling biased to achieve either time or temperature ramps. Any of these programs can run immediately, delay start [1m to 99:59h] or commence to start in the future at a given time and date, cycled to repeat or enable a 7-day program mode allows the activation of a daily program.

    Additional features, defrost function and real time clock.
    Heat-up and Cool down Times
    • 20 mins
    • 35 mins
    • 40 mins
    Fan speed
    The Fan speed can be set from 10% to 100% for maximum air convection in the chamber.
    Exhaust air flap
    The Exhaust air flap can be set from 0% closed to 100% open and allows air from the chamber to vent in either heating or cooling modes.
    Logger
    Data logging of minimum, average and maximum temperature values to USB.
    Safety features
    Switching on, the controls undergo an automatic diagnostic check.

    Features a temperature sensor fail alarm with error reporting on screen.

    Power failure control with auto resume and event recording.

    Setting of High and Low temperature Alarm.

    Door opening generates an audible beep and indication on LCD display. When a program is running and should the door be left open a Door Alarm occurs.

    Over temperature protection Class 1 provides overall unit protection. Also featuring Class 3.3 providing sample protection about set temperature, under and over temperature settings, that will cut off heating or cooling until the chamber temperature returns to normal values when heating or cooling control automatically resumes.

    Safety class
    Fitted with Class 1 for overall unit protection. Class 3.3 self-resetting protection, protecting samples in the chamber at set temperatures.
    Warranty period
    3 Years
    Notes
    • Before ordering please check the room or building access where this unit will be installed and electrical power requirements.
    • Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
    • Working capacity of chamber may be smaller.
    • Incubators up to 112 litres are stackable.
    • Do not place in direct sunlight or near a heat or cold source.
    • Allow a 100mm air gap away from wall at rear. Ensure there is a minimum 300mm air gap from top of the unit to ceiling.

    Temperature range increase to -10°C for 400L cooled incubator

    Temperature range increase to -10°C for 400L cooled incubator

    Photoperiodic System, 8 Lighting elements, door mounted, day and night sim software

    Photoperiodic System, 8 Lighting elements, door mounted, day and night sim software

    Internal power socket for Fan Assisted s range only

    This factory fit accessory provides a UK 3pin 230V power supply inside the chamber of S series Clifton Incubator for powering Mixers or lighting.

    Over-temperature safety protection 3.1

    Accessory factory fit option Class 3 provides self-resetting protection at set temperature.

    Interior lighting

    Factory fit accessory - Incubator temperature range limited to a maximum 70°C

    Walkabout Insulative Scoop Tray

  • Working temperature range -196°C to 93°C.
  • Durable and lightweight.
  • Lid not required.
  • Condensation Free.
  • Can be cleaned simply hand wash with mild detergent and towel dry.
  • Bath Armor™ - 0.5 litre

    Bath Armor™ also replaces pre-drilled blocks in your Blockheaters with thermally efficient pellets that are easy to keep clean and reduces the investment in blocks.

    Chill Bucket with Beads, Bead bag with 2 off Chilli Packs

    The Chill Bucket can maintain cold temperatures 1 - 8°C for 4 or more hours with one Chill Pack. For up to 8 or more hours a second Chill Pack is recommended. The Chill Packs were frozen to -20°C in a freezer and the Beads cooled to 2°C in a refrigerator prior to placing in the bucket.

    Temperature data represents actual measurement results from a single probe in centre of the bucket.

    NE7-750TP

    750L Cooled Incubator, touch screen, fan assist circulation

    « Return to Incubators

    Dimensions
    External: 1260w x 870d x 1890h mm
    Internal: 1040w x 600d x 1200h mm
    Packed: 135x92x211cm
    Capacity
    750 litre chamber Working capacity of the chamber can be smaller.
    Temperature range
    Temperature range 0°C to 70°C, cooling temperature range 0°C to 47°C Temperature range can be extended to -10°C as an accessory item, factory configurable
    Sensitivity
    ±0.4°C @ 0°C / ±0.2°C @ 37°C Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
    Uniformity
    ±0.5°C @ 37°C Uniformity measured in vertical axis in the chamber using Wired Shelves.
    Door configuration
    Double door Internal glass door and outer solid door with door lock and open door alarm
    Shelves fitted
    5
    Shelves max. no.
    16
    Shelf max. workload
    10kg
    Chamber max. workload
    140kg
    Power consumption
    1800W
    Voltage
    230V 50Hz Also available 230V 60Hz or 120V 60Hz models, please specify on order.
    Packed weight
    280kg + gas in the cooling installation R404/0.24kg
    Product Code
    NE7-750TP
    Description
    Clifton Cooled Incubators feature ‘touch screen’ colour LCD controls for precision temperature and time control from 0°C to 70°C, cooling temperature range 0°C to 47°C, at set temperatures, delay start or run for a timed period reproducing precise chamber conditions.

    Individuals can also store up to 20 programs, with their own password login for program access and chamber temperatures can be logged to USB, for good laboratory practice.

    All control surfaces are wipe clean.

    The digital microprocessor controls feature a real time clock, diagnostics, digital LCD display to 0.1°C resolution, dual pt100 probes, including data logging of actual temperatures using the USB port. Every unit is supplied with a Calibration Certificate validating chamber conditions at 37°C.

    Access port fitted as standard 30 mm diameter.

    Featuring a stainless steel interior with stainless steel outer case powder painted. Particular attention paid providing a good tight door closure and hinge design to maintain a sealed chamber in use. Case is well insulated to reduce temperature dissipation in use. This model is a double door unit free standing model features an Access port as standard 30 mm diameter.
    Controls
    Featuring bold full colour 5.7” touch screen LCD display of measured temperatures in real-time, in increments of ±0.1°C, with fan speed status, set temperature, date and time.

    Touch screen controls guide you through control functions.

    The Cooled Incubator can be set to run continuous at a set temperature, delay start or commence to start unsupervised in the future at a given time and date.

    Each user can access controls via a login screen with 20 available programs and up to 9 segments in each program for temperature time profiles. An administrator function manages all user accounts.

    Program content can include for example fan speed, exhaust air flap, setting of heating or cooling biased to achieve either time or temperature ramps. Any of these programs can run immediately, delay start [1m to 99:59h] or commence to start in the future at a given time and date, cycled to repeat or enable a 7-day program mode allows the activation of a daily program.

    Additional features, defrost function and real time clock.
    Heat-up and Cool down Times
    • 20 mins
    • 35 mins
    • 50 mins
    Fan speed
    The Fan speed can be set from 10% to 100% for maximum air convection in the chamber.
    Exhaust air flap
    The Exhaust air flap can be set from 0% closed to 100% open and allows air from the chamber to vent in either heating or cooling modes.
    Logger
    Data logging of minimum, average and maximum temperature values to USB.
    Safety features
    Switching on, the controls undergo an automatic diagnostic check.

    Features a temperature sensor fail alarm with error reporting on screen.

    Power failure control with auto resume and event recording.

    Setting of High and Low temperature Alarm.

    Door opening generates an audible beep and indication on LCD display. When a program is running and should the door be left open a Door Alarm occurs.

    Over temperature protection Class 1 provides overall unit protection. Also featuring Class 3.3 providing sample protection about set temperature, under and over temperature settings, that will cut off heating or cooling until the chamber temperature returns to normal values when heating or cooling control automatically resumes.

    Safety class
    Fitted with Class 1 for overall unit protection. Class 3.3 self-resetting protection, protecting samples in the chamber at set temperatures.
    Warranty period
    3 Years
    Notes
    • Before ordering please check the room or building access where this unit will be installed and electrical power requirements.
    • Sensitivity measurements based on temperature readings on shelf in centre of the chamber.
    • Working capacity of chamber may be smaller.
    • Incubators up to 112 litres are stackable.
    • Do not place in direct sunlight or near a heat or cold source.
    • Allow a 100mm air gap away from wall at rear. Ensure there is a minimum 300mm air gap from top of the unit to ceiling.

    Temperature range increase to -10°C for 750L cooled incubator

    Temperature range increase to -10°C for 56L cooled incubator

    Photoperiodic System, 8 Lighting elements, door mounted, day and night sim software

    Photoperiodic System, 8 Lighting elements, door mounted, day and night sim software

    Photoperiodic System, 10 Lighting elements, door mounted, day and night sim software

    Photoperiodic System, 10 Lighting elements, door mounted, day and night sim software

    Internal power socket for Fan Assisted s range only

    This factory fit accessory provides a UK 3pin 230V power supply inside the chamber of S series Clifton Incubator for powering Mixers or lighting.

    Over-temperature safety protection 3.1

    Accessory factory fit option Class 3 provides self-resetting protection at set temperature.

    Interior lighting

    Factory fit accessory - Incubator temperature range limited to a maximum 70°C

    Walkabout Insulative Scoop Tray

  • Working temperature range -196°C to 93°C.
  • Durable and lightweight.
  • Lid not required.
  • Condensation Free.
  • Can be cleaned simply hand wash with mild detergent and towel dry.
  • Bath Armor™ - 0.5 litre

    Bath Armor™ also replaces pre-drilled blocks in your Blockheaters with thermally efficient pellets that are easy to keep clean and reduces the investment in blocks.

    Chill Bucket with Beads, Bead bag with 2 off Chilli Packs

    The Chill Bucket can maintain cold temperatures 1 - 8°C for 4 or more hours with one Chill Pack. For up to 8 or more hours a second Chill Pack is recommended. The Chill Packs were frozen to -20°C in a freezer and the Beads cooled to 2°C in a refrigerator prior to placing in the bucket.

    Temperature data represents actual measurement results from a single probe in centre of the bucket.