BH-1 Blockheaters

BH-1T

Blockheater analogue, thermostatic

« Return to Blockheaters

Dimensions
External: 200w x 295d x 85h mm
Heating well: 140w x 50d x 72h mm
Packed size: 26X27X23cm
Temperature Range
ambient +5°C - 120°C
Temperature Setting
analogue dial
Sensitivity
±0.5°C @ 60°C
Uniformity
±0.5°C @ 60°C
Well capacity
1 or 2 blocksTwo accessory blocks can be fitted into heating well: DBK-0.2, DBK-0.5, DBK-1.5, DBK-2.0
Heater Power (220-240V)
250W
Voltage
230V 50-60Hz
Packed Weight
4.0Kg
Product Code
BH-1T
Description
Clifton® Block heaters provide a safe, dry and consistent method of heating accessory aluminium blocks with excellent thermal conductivity for heating tubes

Supplied with block extraction tool.

  • Any two accessory blocks can be fitted in the heating well for 0.2ml, 0.5ml, 1.5ml and 2.0ml tubes.

  • Any one accessory block can be fitted in the heating well for 10mm, 12mm, 13mm, 16mm, 19mm, 25mm diameter tubes and 50ml tube sizes.



Safety features
Thermal over temperature protection
Power Consumption (220-240V)
250W
Warranty Period
3 Years
Features and Benefits
1. Chemical resistant control panel. 2.Wide choice of accessory heating blocs. 3. Operates up to 120°C. 4. Stainless steel case corrosion resistant. 5. Powder painted body providing a durable finish and protection against corrosion and now featuring “active anti-bacterial technology”. This paint finish actively inhibits bacterial growth improving hygiene requirements as demanded by many clinical and laboratory environments. Hygienic coatings are part of a controlled approach to cleaner facilities. Anti-bacterial paint finish is effective against major strains of bacterium including E-coli and Staphylococcus aureus, resistant strain. Within its formulation an active ingredient is a proven anti-bacterial agent bound into the coating during application and curing to the product. The efficacy of the paint finish applied to the Clifton range is maintained over time, as the anti-bacterial agent is integral within the paint finish.

Bath Armor™ - 0.5 litre

Bath Armor™ also replaces pre-drilled blocks in your Blockheaters with thermally efficient pellets that are easy to keep clean and reduces the investment in blocks.

10mm x 32 Hole Block

1. Wide choice of accessory Blocks suiting - micro tubes, tubes and bottles.

2. Compatible with Block extraction tool supplied with BH-1T and BH-1/DIG.

12mm x 32 Hole Block

1. Wide choice of accessory Blocks suiting - micro tubes, tubes and bottles.

2. Compatible with Block extraction tool supplied with BH-1T and BH-1/DIG.

13mm x 32 Hole Block

1. Wide choice of accessory Blocks suiting - micro tubes, tubes and bottles.

2. Compatible with Block extraction tool supplied with BH-1T and BH-1/DIG.

16mm x 18 Hole Block

1. Wide choice of accessory Blocks suiting - micro tubes, tubes and bottles.

2. Compatible with Block extraction tool supplied with BH-1T and BH-1/DIG.

19mm x 10 Hole Block

1. Wide choice of accessory Blocks suiting - micro tubes, tubes and bottles.

2. Compatible with Block extraction tool supplied with BH-1T and BH-1/DIG.

25mm x 10 Hole Block

1. Wide choice of accessory Blocks suiting - micro tubes, tubes and bottles.

2. Compatible with Block extraction tool supplied with BH-1T and BH-1/DIG.

0.2ml micro tube x 54 hole Block or 6 x 8 PCR strips (two blocks can fitted in heating well)

1. Wide choice of accessory Blocks suiting - micro tubes, tubes and bottles.

2. Compatible with Block extraction tool supplied with BH-1T and BH-1/DIG - shown in image above.

0.5ml micro tube Block - 'v' well - 16 holes (two blocks can fitted in heating well)

1. Wide choice of accessory Blocks suiting - micro tubes, tubes and bottles.

2. Compatible with Block extraction tool supplied with BH-1T and BH-1/DIG - shown image above.

1.5ml micro tube Block - 'v' well - 12 holes (two blocks can fitted in heating well)

1. Wide choice of accessory Blocks suiting - micro tubes, tubes and bottles.

2. Compatible with Block extraction tool supplied with BH-1T and BH-1/DIG - shown in image above.

2.0ml micro tube Block - 'u' well - 16 holes (two blocks can fitted in heating well)

1. Wide choice of accessory Blocks suiting - micro tubes, tubes and bottles.

2. Compatible with Bloc extraction tool supplied with BH-1T and BH-1/DIG - shown in image above.

50ml (29mm dia.) x 8 Hole Block

1. Wide choice of accessory Blocks suiting - micro tubes, tubes and bottles.

2. Compatible with Block extraction tool supplied with BH-1T and BH-1/DIG.

Plain Block

1. Provides an accurately controlled hotplate, flat heating surface.

2. Ideal for heating microscope slides.

Lid, safety cover, hinged

Provides a hinged lid for easy access to blocks.

Safety cover when heating tubes.

Semi-transparent to view samples.

Suitable for all BH models.

BH-1/DIG

Blockheater digital

« Return to Blockheaters

Dimensions
External: 200w x 295d x 85h mm
Internal: 140w x 50d x 72h mm [heating well]
Packed size: 26X27X23cm
Temperature Range
ambient +5°C - 150°C
Temperature setting
Digital in ±0.1°C increments
Temperature control
Digital LED display. Resolution 0.1°C
Temperature alarm
+4°C with heater cut off, indication
Sensitivity
±0.1°C @ 60°C
Uniformity
±0.1°C @ 60°C
Uniformity across 2 blocks
±0.2°C @ 37°
Timer
variable, 00:01 to 99:59 [hh:mm] Activates at set temperature
Heater Power (220-240V)
250W
Voltage
230V 50-60Hz
Packed Weight
4 Kg
Product Code
BH-1/DIG
Description
Clifton® Block heaters provide a safe, dry and consistent method of heating accessory aluminium blocks with excellent thermal conductivity for heating tubes.

Supplied with block extraction tool.

  • Any two blocks can be fitted in the heating well for 0.2ml, 0.5ml, 1.5ml and 2.0ml tubes.

  • Any one block can be fitted in the heater well for 10mm, 12mm, 13mm, 16mm, 19mm, 25mm diameter tubes and 50ml tube sizes.


  • In the above image the Blockheater is fitted with accessories: BHL-1 Lid safety cover and two Blocks the DBK-0.2 for 0.2ml micro tubes and DBK-0.5 Bloc for 0.5ml micro tubes.

Controls
Featuring bold LED display of measured temperatures in real-time, increments of ±0.1°C, using precision PID temperature control. Setting for block temperature only or combination of temperature and time. Timer setting variable in 1-minute increments from 00:01 [hh:mm] to 99:59 [hh:mm] with “end” message on completion-timed period. Settings retained even after turning the unit off.

Easy to use controls, utilising touch keypads for setting time and temperature values with indicators for heating, over temperature alarm and timer.

The Blockheater can be set to run at a set temperature or commence the timer once the block reaches set temperature.

Features auto setting over temperature alarm protecting your work at set temperature.

Every unit undergoes a factory calibration at two temperatures for validation.
Safety Features
Thermal over temperature protection. Features auto setting over temperature alarm protecting your work at set temperature.
Heat-up Times
  • 5 mins
  • 8 mins
  • 18 mins
Power Consumption (220-240V)
250W
Energy Consumption
0.20kWh @ 37°C for a working day.

1. The lower the figure, the less energy used. 2. Data supplied for size and range comparison, guidance only. 3. Measured consumption at set point. 4. Energy consumption may vary in use.
Warranty Period
3 Years
Features and Benefits
1. Chemical resistant control panel. 2.Wide choice of accessory heating blocs. 3. Operates up to 150°C. 4. Stainless steel case corrosion resistant. 5. Powder painted body providing a durable finish and protection against corrosion and now featuring “active anti-bacterial technology”. This paint finish actively inhibits bacterial growth improving hygiene requirements as demanded by many clinical and laboratory environments. Hygienic coatings are part of a controlled approach to cleaner facilities. Anti-bacterial paint finish is effective against major strains of bacterium including E-coli and Staphylococcus aureus, resistant strain. Within its formulation an active ingredient is a proven anti-bacterial agent bound into the coating during application and curing to the product. The efficacy of the paint finish applied to the Clifton range is maintained over time, as the anti-bacterial agent is integral within the paint finish.

Bath Armor™ - 0.5 litre

Bath Armor™ also replaces pre-drilled blocks in your Blockheaters with thermally efficient pellets that are easy to keep clean and reduces the investment in blocks.

10mm x 32 Hole Block

1. Wide choice of accessory Blocks suiting - micro tubes, tubes and bottles.

2. Compatible with Block extraction tool supplied with BH-1T and BH-1/DIG.

12mm x 32 Hole Block

1. Wide choice of accessory Blocks suiting - micro tubes, tubes and bottles.

2. Compatible with Block extraction tool supplied with BH-1T and BH-1/DIG.

13mm x 32 Hole Block

1. Wide choice of accessory Blocks suiting - micro tubes, tubes and bottles.

2. Compatible with Block extraction tool supplied with BH-1T and BH-1/DIG.

16mm x 18 Hole Block

1. Wide choice of accessory Blocks suiting - micro tubes, tubes and bottles.

2. Compatible with Block extraction tool supplied with BH-1T and BH-1/DIG.

19mm x 10 Hole Block

1. Wide choice of accessory Blocks suiting - micro tubes, tubes and bottles.

2. Compatible with Block extraction tool supplied with BH-1T and BH-1/DIG.

25mm x 10 Hole Block

1. Wide choice of accessory Blocks suiting - micro tubes, tubes and bottles.

2. Compatible with Block extraction tool supplied with BH-1T and BH-1/DIG.

0.2ml micro tube x 54 hole Block or 6 x 8 PCR strips (two blocks can fitted in heating well)

1. Wide choice of accessory Blocks suiting - micro tubes, tubes and bottles.

2. Compatible with Block extraction tool supplied with BH-1T and BH-1/DIG - shown in image above.

0.5ml micro tube Block - 'v' well - 16 holes (two blocks can fitted in heating well)

1. Wide choice of accessory Blocks suiting - micro tubes, tubes and bottles.

2. Compatible with Block extraction tool supplied with BH-1T and BH-1/DIG - shown image above.

1.5ml micro tube Block - 'v' well - 12 holes (two blocks can fitted in heating well)

1. Wide choice of accessory Blocks suiting - micro tubes, tubes and bottles.

2. Compatible with Block extraction tool supplied with BH-1T and BH-1/DIG - shown in image above.

2.0ml micro tube Block - 'u' well - 16 holes (two blocks can fitted in heating well)

1. Wide choice of accessory Blocks suiting - micro tubes, tubes and bottles.

2. Compatible with Bloc extraction tool supplied with BH-1T and BH-1/DIG - shown in image above.

50ml (29mm dia.) x 8 Hole Block

1. Wide choice of accessory Blocks suiting - micro tubes, tubes and bottles.

2. Compatible with Block extraction tool supplied with BH-1T and BH-1/DIG.

Plain Block

1. Provides an accurately controlled hotplate, flat heating surface.

2. Ideal for heating microscope slides.

Lid, safety cover, hinged

Provides a hinged lid for easy access to blocks.

Safety cover when heating tubes.

Semi-transparent to view samples.

Suitable for all BH models.

Calibration Record

Where equipment requires a Calibration record please order when buying equipment from Clifton® range.